A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Asus Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

updating cpu from 533 to 800 fsb



 
 
Thread Tools Display Modes
  #1  
Old August 4th 05, 03:56 PM
BigJim
external usenet poster
 
Posts: n/a
Default updating cpu from 533 to 800 fsb

Hello,

I have a asus p4p800-se board running a 2.4 P4 @ 533 on the FSB.
I am going to install a 3.2 P4 Prescott in a day or two, coming in the mail.
Will I have any problems related to turning on the Hyper-Threading. Is there
any special
way to do this? Should I do clean install of the OS?

TIA


  #2  
Old August 4th 05, 04:00 PM
KC Computers
external usenet poster
 
Posts: n/a
Default

I have a asus p4p800-se board running a 2.4 P4 @ 533 on the FSB.
I am going to install a 3.2 P4 Prescott in a day or two, coming in the
mail.
Will I have any problems related to turning on the Hyper-Threading. Is
there any special way to do this? Should I do clean install of the OS?


All you need to do is to make sure Hyper-Threading is enabled in the BIOS
(which it should be by default). A clean install of the OS is not
necessary.

---
Kevin Chalker, Owner (KC COMPUTERS)
E-mail: Web: www.kc-computers.com
Internet dealer since 1991!!! See WWW.RESELLERRATINGS.COM!!!


  #3  
Old August 5th 05, 06:43 AM
timmy
external usenet poster
 
Posts: n/a
Default

but is recommended...

On Thu, 04 Aug 2005 15:00:05 GMT, "KC Computers"
wrote:

I have a asus p4p800-se board running a 2.4 P4 @ 533 on the FSB.
I am going to install a 3.2 P4 Prescott in a day or two, coming in the
mail.
Will I have any problems related to turning on the Hyper-Threading. Is
there any special way to do this? Should I do clean install of the OS?


All you need to do is to make sure Hyper-Threading is enabled in the BIOS
(which it should be by default). A clean install of the OS is not
necessary.

---
Kevin Chalker, Owner (KC COMPUTERS)
E-mail: Web: www.kc-computers.com
Internet dealer since 1991!!! See WWW.RESELLERRATINGS.COM!!!


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Updating BIOS help needed Bill Hoppy Haupt Asus Motherboards 5 June 24th 05 03:10 AM
Updating the firmware in ASUS DRW-1608P drives Mike Freeman Asus Motherboards 2 April 11th 05 02:17 AM
advice required about updating video card thewalls Nvidia Videocards 7 January 22nd 04 01:24 PM
Updating nForce2 to 3.13. iamnotme Nvidia Videocards 0 November 9th 03 02:40 AM
Updating the BIOS Eric Scofield General 13 November 5th 03 10:51 PM


All times are GMT +1. The time now is 12:32 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.