A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Printers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Lexmark CS410dn - flashing display



 
 
Thread Tools Display Modes
  #11  
Old September 11th 19, 10:44 AM posted to comp.periphs.printers
Phil Reynolds
external usenet poster
 
Posts: 12
Default Lexmark CS410dn - flashing display

On Mon, 9 Sep 2019 21:30:16 +0100
Phil Reynolds wrote:

On Mon, 09 Sep 2019 16:22:19 -0400
Fred McKenzie wrote:

Take a look at:

https://www.laserpros.com/img/manual...-cs410-cs510-c
21312-5027-service-manual.pdf

Found using Google search for lexmark cs410dn service manual. I
assume the "dn" refers to options on your particular printer.


Indeed, this looks rather like another one I found, but actually
easier to use.

This model always seems to have the "dn" options... there is a "dtn"
as well, I believe.


As expected, Lexmark quote around twice the cost of the nearest new
equivalent for a repair.

If I could somehow access the Remote Operator Panel (VNC) without using
the Java applet built into the printer (which no modern browser seems
to touch), that would be a satisfactory workaround.

--
Phil Reynolds
mail:
PLEASE followup news posts in news
Web:
http://phil.tinsleyviaduct.com/

  #12  
Old September 11th 19, 01:31 PM posted to comp.periphs.printers
Phil Reynolds
external usenet poster
 
Posts: 12
Default Lexmark CS410dn - flashing display

On Wed, 11 Sep 2019 10:44:44 +0100
Phil Reynolds wrote:

On Mon, 9 Sep 2019 21:30:16 +0100
Phil Reynolds wrote:

On Mon, 09 Sep 2019 16:22:19 -0400
Fred McKenzie wrote:

Take a look at:

https://www.laserpros.com/img/manual...-cs410-cs510-c
21312-5027-service-manual.pdf

Found using Google search for lexmark cs410dn service manual. I
assume the "dn" refers to options on your particular printer.


Indeed, this looks rather like another one I found, but actually
easier to use.

This model always seems to have the "dn" options... there is a "dtn"
as well, I believe.


As expected, Lexmark quote around twice the cost of the nearest new
equivalent for a repair.

If I could somehow access the Remote Operator Panel (VNC) without
using the Java applet built into the printer (which no modern browser
seems to touch), that would be a satisfactory workaround.


I can use PaleMoon to get somewhere with it, but unfortunately I now
get "Error: Connection refused" from the applet.

Any solutions available short of involving Lexmark again?

--
Phil Reynolds
mail:
PLEASE followup news posts in news
Web:
http://phil.tinsleyviaduct.com/

  #13  
Old September 11th 19, 11:24 PM posted to comp.periphs.printers
Phil Reynolds
external usenet poster
 
Posts: 12
Default Lexmark CS410dn - flashing display

On Wed, 11 Sep 2019 15:30:48 -0400
Andreas Kohlbach wrote:

I can use PaleMoon to get somewhere with it, but unfortunately I now
get "Error: Connection refused" from the applet.

Any solutions available short of involving Lexmark again?


There's no manual so I cannot check. Apparently it has a built-in
network. Do you know the IP. If not your router log might. Ping that
from a computer inside the same network. If that doesn't work I'm out
of ideas other than the printer might have a web interface already.

If it works install tighten-client or any other NC client for your OS
and start it with the IP of the printer.


I am (obviously. from the above) *way* ahead.

I know full well the IPv4 and IPv6 addresses.

I cannot use a VNC client for my OS because the VNC port does not open
until I try to launch the VNC applet, and then if I do try one, I get a
brief flash of black and the connection closes.

--
Phil Reynolds
mail:
PLEASE followup news posts in news
Web:
http://phil.tinsleyviaduct.com/

  #14  
Old September 12th 19, 10:10 AM posted to comp.periphs.printers
Phil Reynolds
external usenet poster
 
Posts: 12
Default Lexmark CS410dn - flashing display

On Wed, 11 Sep 2019 18:42:41 -0400
Andreas Kohlbach wrote:

If the VNC port isn't open there is nothing you can do using a VNC
client or some JAVA application connecting to VNC.


It's not "isn't open", it's "isn't open UNTIL..." - if you carefully
re-read what I wrote.

If you know the IP of your printer start a web browser and point it to
it. If you don't see the setup interface then I am out of ideas.


I need to access the "Remote Operator Panel", which is *deeper* than
the web interface. I can do almost everything routine with the web
interface, but not interact directly with messages on the printer's own
display. That is what the "Remote Operator Panel" is for - and this has
become important because of the fault with the display on the printer.

You are generally correct, but have not understood the specifics.

--
Phil Reynolds
mail:
PLEASE followup news posts in news
Web:
http://phil.tinsleyviaduct.com/

  #15  
Old February 7th 20, 07:28 PM posted to comp.periphs.printers
[email protected]
external usenet poster
 
Posts: 1
Default Lexmark CS410dn - flashing display

On Thursday, September 12, 2019 at 5:10:29 AM UTC-4, Phil Reynolds wrote:
On Wed, 11 Sep 2019 18:42:41 -0400
Andreas Kohlbach wrote:

If the VNC port isn't open there is nothing you can do using a VNC
client or some JAVA application connecting to VNC.


It's not "isn't open", it's "isn't open UNTIL..." - if you carefully
re-read what I wrote.

If you know the IP of your printer start a web browser and point it to
it. If you don't see the setup interface then I am out of ideas.


I need to access the "Remote Operator Panel", which is *deeper* than
the web interface. I can do almost everything routine with the web
interface, but not interact directly with messages on the printer's own
display. That is what the "Remote Operator Panel" is for - and this has
become important because of the fault with the display on the printer.

You are generally correct, but have not understood the specifics.

--
Phil Reynolds
mail:
PLEASE followup news posts in news
Web:
http://phil.tinsleyviaduct.com/


I have the same issue, I use the remote operator panel in IE11 with Java plugin. After you install Java, make sure you enable in IE11. It's slow, but works.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Grey scale desktop on my TV (secondary display), but fine on my LCD(primary display)! Ant Ati Videocards 0 June 4th 09 07:08 AM
Lexmark Z65 with tray one light flashing JohnF Printers 1 April 29th 07 03:33 AM
Lexmark 6200 Series & Lexmark Imaging Studio. fred Scanners 0 February 25th 07 11:52 AM
Inspiron 1150 display dim/dark Backlight? Display? Inverter? Danny Dell Computers 3 August 7th 06 04:32 AM
Problem: Blank display after fiddling with primary/secondary display settings Rasmus Paetau Ati Videocards 2 June 17th 04 01:03 AM


All times are GMT +1. The time now is 06:01 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2004-2020 HardwareBanter.
The comments are property of their posters.