If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
running a 2800+ barton with a 400 MHz FSB
"futureworlds" wrote in message orlds.it... I'd like to run it with 200x10.5 = 2100. I'm not looking for an extreme OC or anything; just wanna get the FSB up to 400. Can this be done, or is the multi locked @ 12.5? How can I tell if my 2800+ is locked, and if it's locked, how can I unlock it (got a url w/ pics or something)? Thanks all! What is the advantage of running a different multi? I have my 2800+ (AXDA2800DKV4D - AQXDA0316) set at 168MHz x 12.5 running at 2103MHz - I got the FSB up to 175 but get a little unstable. Should I be trying to tweak the multi in the bios? Should I put the figure up or down? Si. |
#2
|
|||
|
|||
i can get my 2800 up to 2.3ghz (200x11.5) at stock voltage and stock amd hsf
got an a7n8x dlx Brendan C. "Ed" wrote in message ... On Tue, 6 Jan 2004 02:25:38 -0000, "Simon" wrote: "futureworlds" wrote in message worlds.it... I'd like to run it with 200x10.5 = 2100. I'm not looking for an extreme OC or anything; just wanna get the FSB up to 400. Can this be done, or is the multi locked @ 12.5? How can I tell if my 2800+ is locked, and if it's locked, how can I unlock it (got a url w/ pics or something)? Thanks all! What is the advantage of running a different multi? I have my 2800+ (AXDA2800DKV4D - AQXDA0316) set at 168MHz x 12.5 running at 2103MHz - I got the FSB up to 175 but get a little unstable. Should I be trying to tweak the multi in the bios? Should I put the figure up or down? Si. FSB x Mult = CPU MHz. So if you want to run the FSB @ 200 I think you'll need to lower the mult. You should be able to run a Barton 2800+ @ 200 x 10.5 at default vcore as that would only be around a 17MHz overclock on the CPU. Ed |
#3
|
|||
|
|||
"Brendan" wrote
i can get my 2800 up to 2.3ghz (200x11.5) at stock voltage and stock amd hsf got an a7n8x dlx Hi, is that 24hour Prime95 stable? -- Wayne ][ |
#4
|
|||
|
|||
hehe, duno yet. havent got prime95. It runs the games i play without a
hitch, so its good enough for me atm. Brendan C. "Wayne Youngman" wrote in message ... "Brendan" wrote i can get my 2800 up to 2.3ghz (200x11.5) at stock voltage and stock amd hsf got an a7n8x dlx Hi, is that 24hour Prime95 stable? -- Wayne ][ |
#5
|
|||
|
|||
Hi,
I'm running an AMD 2800 Barton on a A7n8x v2 board using 200X11.5 for 2305. It's rock solid. Also have 1 gig of 4000 hyper X ram, (dual channel) and Koolance water cooling. This thing kicks butt. CPU runs around 26-27 C most of the time. Never seen it past 29. I'm also running a PCI video card and a dual channel Matrox AGP card. Three 19" monitors on line. That's the one thing I couldn't do without. It's great to not have to minimize screens, just drag them to the 2nd or 3rd monitor. I can watch a DVD on one, surf the Net on another, and still have a monitor left for what ever else needs doing! It's like having three computers attached to one mouse and keyboard. Netguider |
#6
|
|||
|
|||
Hi Netguider, I have essentially the same setup as you: Koolance
water cool, 2800+ but 1 G of PC2700 DDR in Dual channel. I have a ATI Radeon 9000 pro with a digial and analog connector. When I plugged 2 monitors in, one digital and the other analog, they both displayed the same desktop, it's just like having duplicate monitors. Can you elaborate how you config your to work independently. Thanks On Tue, 6 Jan 2004 17:15:11 -0500, "Netguider" wrote: Hi, I'm running an AMD 2800 Barton on a A7n8x v2 board using 200X11.5 for 2305. It's rock solid. Also have 1 gig of 4000 hyper X ram, (dual channel) and Koolance water cooling. This thing kicks butt. CPU runs around 26-27 C most of the time. Never seen it past 29. I'm also running a PCI video card and a dual channel Matrox AGP card. Three 19" monitors on line. That's the one thing I couldn't do without. It's great to not have to minimize screens, just drag them to the 2nd or 3rd monitor. I can watch a DVD on one, surf the Net on another, and still have a monitor left for what ever else needs doing! It's like having three computers attached to one mouse and keyboard. Netguider |
#7
|
|||
|
|||
Hi,
I didn't really have to do anything special to make the three monitors work together. The AGP Matrox card has the software for the duel setup. When I installed the PCI card, XP-Pro found it and when I clicked on the "properties", "settings" menu, I show all three monitors on the screen. The two other boxes say, "Use this device as the primary monitor" and "Extend my Windows desktop onto this monitor." That brought up all three monitors. The cursor moves across all three. I can drag and drop between them. The Matrox software lets me run them independently or I can configure them to all show the same thing. I can even spread Excel across all three monitors! It's great. I think I'd go back to an old Radio Shack "Trash-80" before I'd give up the three monitors. I'm thinking about adding a fourth :-) Netguider |
#8
|
|||
|
|||
a7n8x deluxe v2
barton 2800+ 10.5/215 1.75 pc3500 hyperX very stable 39-43 deg loaded "Netguider" wrote in message ... Hi, I didn't really have to do anything special to make the three monitors work together. The AGP Matrox card has the software for the duel setup. When I installed the PCI card, XP-Pro found it and when I clicked on the "properties", "settings" menu, I show all three monitors on the screen. The two other boxes say, "Use this device as the primary monitor" and "Extend my Windows desktop onto this monitor." That brought up all three monitors. The cursor moves across all three. I can drag and drop between them. The Matrox software lets me run them independently or I can configure them to all show the same thing. I can even spread Excel across all three monitors! It's great. I think I'd go back to an old Radio Shack "Trash-80" before I'd give up the three monitors. I'm thinking about adding a fourth :-) Netguider |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Overclocking 2500+ Barton to 3200+ Help please | David Bradley | Overclocking AMD Processors | 3 | February 21st 04 08:52 PM |
XP 2500+ barton core running vcool | stora | Overclocking AMD Processors | 5 | January 25th 04 06:35 PM |
Barton 2500 bundle still running hot after exchange | Neil | Homebuilt PC's | 12 | August 19th 03 10:57 AM |
2500 Barton - running too hot? | Neil | Homebuilt PC's | 21 | August 3rd 03 06:07 PM |
Athlon 2500XP Barton - Is this considered to be "overclocking" ? | Arif | Overclocking AMD Processors | 5 | July 1st 03 12:22 PM |