If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
overclock 2500+ to 3200+ = 5 deg C increase
Header says it all, I overclocked my 2500+ Barton core to 3200+ speed by
upping the FSB to 200MHz. This results in about a 5 to 7 degree C increase in diode temp. Should it go THAT much higher? I am using an Antec fan I picked up at Circuit City, has a copper plate for the bottom and VERY fine fins, fan around 2800 rpm. BUT it dosen't matter if I use that fan or a MONSTER solid copper job with a fan from hell, (read LOUD) runs about 7K rpm. I just can't figure out how to get the temps down, Vcore is stock, cover is off the side, 1 incoming fan and 3 exhaust fans. When I put my hand near the CPU I can feel the heat! There has got to be something better, I know I'm negating the intake and exhaust fans with the cover off, but I don't think it will be any better with the cover on (or maybe it would?????) ambient temp is around 70 deg F in the room, celing fan running so there is plenty of air movement in the room...........any ideas? I just set the clock back to 2500+ and now I'm running 45 to 47 deg C on the diode........at 3200+ it runs around 49 to 52 C (all temps are at idle, unless I run something then it jumps to the higher numbers) What is too hot? 60C is what I'm thinking that is why I don't like those 52 and even some 56 C when something intensive is running.... TIA Bitsbucket --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.543 / Virus Database: 337 - Release Date: 11/21/2003 |
#2
|
|||
|
|||
Max. die temp. is 85C I think...that's according to AMD specs...but I'm not 100%
sure on that so you might want to confirm. I did the same thing you did, my temp went up to about 58C with the case closed, it was cooler with case open. I just installed 2 extra 6CM fans right by the CPU so we'll see if that makes any difference (I have SETI runing full-time, so it's 100% load non stop). On Fri, 19 Dec 2003 02:16:44 UTC, "Bitsbucket" wrote: What is too hot? 60C is what I'm thinking that is why I don't like those 52 and even some 56 C when something intensive is running.... TIA Bitsbucket --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.543 / Virus Database: 337 - Release Date: 11/21/2003 - Dariusz =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Dariusz Piatkowski dariusz ! at ! mnsi.net, http://www.mnsi.net/~dariusz New Concepts Consulting - Your One Stop For Hardware & Software Solutions Windsor, Ontario, Canada, call (519) 380-0384 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Performance Increase Athlon 64 3500 vs Athlon XP-M 2500 O'Ced to 3200 | Coca Cola Kid | Overclocking AMD Processors | 48 | November 11th 04 09:04 PM |
Performance Increase Athlon 64 3500 vs Athlon XP-M 2500 O'Ced to 3200 | Courseyauto | Overclocking AMD Processors | 0 | November 11th 04 04:57 PM |
Performance Increase Athlon 64 3500 vs Athlon XP-M 2500 O'Ced to 3200 | Coca Cola Kid | AMD x86-64 Processors | 2 | November 7th 04 07:54 AM |
Overclocked 2500 Barton to 3200 using my old Crucial 2100 DDR | [email protected] | General | 5 | January 18th 04 09:01 AM |
how much can i overclock my computer en how | MiniDisc_2k2 | Overclocking | 2 | July 6th 03 12:58 AM |