A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Homebuilt PC's
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Computer will not start



 
 
Thread Tools Display Modes
  #1  
Old January 15th 08, 05:57 PM posted to alt.comp.hardware.pc-homebuilt
[email protected]
external usenet poster
 
Posts: 9
Default Computer will not start

On Jan 14, 10:37 pm, pcbldrNinetyEight pcbldrninetyeight.com wrote:
wrote :



I did not build this computer ... but I am trying to fix it. The
computer is a custom build.


I have an Altec SLK1650 case. I am trying to track down a problem.
If I can get the computer to start the computer works fine. When I
press the button to start the computer it will make the appropriate
sounds but within 1 second the computer dies. If I press the start
button repeatedly it will act like it is going to start for
progressively longer times until it finally it continues running. At
this point the operating system is not running but the fans are
running. I then push the reset button and then the computer start
starts normally. I replaced the power supply (350W) with a 450W but
that did not help. At this point the computer will not start at
all. If I hold the reset button in and press the start button the
computer will sound like it is running but will not boot. When I
release the reset button the computer dies. Just wondering if it
might have something to do with the start or reset buttons. Any
suggestions will be greatly appreciated.


Thanks in advance for the help ... Michael


I don't know if that case uses stand offs for the MOBO (I'm too lazy to
research now) but if one was left in the wrong place it could short out
on the back of the board and cause the problem you describe.

--
pcbldrNinetyEight


I took a look at the stand offs. All of the screws through the MOBO
have stand offs associated with them that are also screwed through the
case. That possible issue does not seem to be a problem.

One thing that I have read about on other threads is that there is a
"POST beep" but I am not sure that I had one prior to this problem
materializing.

Michael
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Computer won't start twomt General 21 January 7th 08 08:42 AM
computer won't start! [email protected] Overclocking AMD Processors 6 March 6th 07 10:33 PM
Computer won't start - Help please BH2 Homebuilt PC's 3 February 14th 07 09:26 AM
Need Help Computer will not start up JD General Hardware 5 December 7th 03 10:17 AM
computer will not start James Walker Overclocking AMD Processors 3 July 9th 03 10:58 AM


All times are GMT +1. The time now is 07:29 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 HardwareBanter.
The comments are property of their posters.