If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
HELP!! 2100 or 2700???
"Toby" wrote in message
... I bought a new AMD Athlon XP 2700+... and the sticker on the chip says that it is a 2700... but in Windows XP... It says im only running a 2100+ .. WHAT THE HECK???? Is it the wrong chip? Or is Windows? What do i do? (This BTW is the SECOND chip cuz the first 2700+ chip I bought did the same thing!) FSB needs to be increased from 133 to 166 |
#12
|
|||
|
|||
HELP!! 2100 or 2700???
rstlne wrote:
"Toby" wrote in message ... I bought a new AMD Athlon XP 2700+... and the sticker on the chip says that it is a 2700... but in Windows XP... It says im only running a 2100+ .. WHAT THE HECK???? Is it the wrong chip? Or is Windows? What do i do? (This BTW is the SECOND chip cuz the first 2700+ chip I bought did the same thing!) FSB needs to be increased from 133 to 166 It saiz that the 2700+ has a 333Mhz FSB... But that isnt an option in my BIOS. |
#13
|
|||
|
|||
I AM TOBY
Seth wrote:
rstlne wrote: "Toby" wrote in message ... I bought a new AMD Athlon XP 2700+... and the sticker on the chip says that it is a 2700... but in Windows XP... It says im only running a 2100+ .. WHAT THE HECK???? Is it the wrong chip? Or is Windows? What do i do? (This BTW is the SECOND chip cuz the first 2700+ chip I bought did the same thing!) FSB needs to be increased from 133 to 166 It saiz that the 2700+ has a 333Mhz FSB... But that isnt an option in my BIOS. |
#14
|
|||
|
|||
HELP!! 2100 or 2700???
Set it for 166 and be done with it! The M/B gives you an effective doubling
of the 166+. Hence, 333 mhz. "Seth" wrote in message ... rstlne wrote: "Toby" wrote in message ... I bought a new AMD Athlon XP 2700+... and the sticker on the chip says that it is a 2700... but in Windows XP... It says im only running a 2100+ .. WHAT THE HECK???? Is it the wrong chip? Or is Windows? What do i do? (This BTW is the SECOND chip cuz the first 2700+ chip I bought did the same thing!) FSB needs to be increased from 133 to 166 It saiz that the 2700+ has a 333Mhz FSB... But that isnt an option in my BIOS. |
#15
|
|||
|
|||
HELP!! 2100 or 2700???
FSB needs to be increased from 133 to 166
It saiz that the 2700+ has a 333Mhz FSB... But that isnt an option in my BIOS. It "saiz" that but I "saiz" FSB needs to be increased from 133 to 166 |
#16
|
|||
|
|||
HELP!! 2100 or 2700???
When I set it to 166, it gives me an error and keeps bringing me back into
BIOS "rstlne" .@. wrote in message ... FSB needs to be increased from 133 to 166 It saiz that the 2700+ has a 333Mhz FSB... But that isnt an option in my BIOS. It "saiz" that but I "saiz" FSB needs to be increased from 133 to 166 |
#17
|
|||
|
|||
HELP!! 2100 or 2700???
It saiz that the 2700+ has a 333Mhz FSB... But that isnt an option in
my BIOS. It "saiz" that but I "saiz" FSB needs to be increased from 133 to 166 is your ram pc2700(333 ddr) or pc2100(266 ddr) if this is the A7S333 then it doesnt officially support a chip with a FSB of 166 You need to make sure as you increase fsb that your memory is set accordingly. If set to auto then it should set itself in. I dont have the board so I couldnt tell you about overclocking it to get teh full potential of the chip but I would guess that's what your going to have to do |
#18
|
|||
|
|||
HELP!! 2100 or 2700???
Hi,
a) The regular 2700+ AMD XP cpu runs at a frontside bus of 266 so the memory is set at 133. Then the DDR-133 (Double Data Rate) Memory by design doubles that to 266. The memory modules need be rated as "2100" or better to achieve that. Set it any higher than 133 in the Bios and it will kick-back down to achieve 133 *2 =266. The 2700+ is a CPU rating only: it runs at 2.17 or so but is the equivalent overall (AMD quoted here) to a P4 2.7. Hence the 2700+. The CLOCK MULTIPLIER times the FSB gives you the final CPU speed. == Read your insert to find the correct one. === ***************************** b) The amd xp known as the "BARTON" runs at a fsb of 333. The memory needed to "keep-up" is DDR-166 aka: "2700" at least. Here we have: 166*2=333. Funny thing is then that the BARTON for the same CPU rating runs way-slower than the regular XP. It's got more OnDie cache (64 + 64 +512 vs 64 + 64 +128) for the regular XP. c) The AMD MP runs at a 400 fsb. Memory needed is "3100" or + . It's 200*2=400)\ Ratings: the same way. Mikey "Toby" wrote in message ... When I set it to 166, it gives me an error and keeps bringing me back into BIOS "rstlne" .@. wrote in message ... FSB needs to be increased from 133 to 166 It saiz that the 2700+ has a 333Mhz FSB... But that isnt an option in my BIOS. It "saiz" that but I "saiz" FSB needs to be increased from 133 to 166 |
#19
|
|||
|
|||
HELP!! 2100 or 2700???
Set the bus speed for the cpu. 133. Higher ram chips will run at lower
speeds. But the cpu will not run at a much higher speed the designed for. Jym "Toby" wrote in message ... When I set it to 166, it gives me an error and keeps bringing me back into BIOS "rstlne" .@. wrote in message ... FSB needs to be increased from 133 to 166 It saiz that the 2700+ has a 333Mhz FSB... But that isnt an option in my BIOS. It "saiz" that but I "saiz" FSB needs to be increased from 133 to 166 |
#20
|
|||
|
|||
HELP!! 2100 or 2700???
Motherboard ? Asus lists A7S266 or A7V333, but not A7S333, recheck your
motherboard model. It looks like the only AMD XP 2700+ sold, is the one with the 166 bus speed. You may try to return the 2700/333 and get a 2600/266 "Toby" wrote in message ... When I set it to 166, it gives me an error and keeps bringing me back into BIOS "rstlne" .@. wrote in message ... FSB needs to be increased from 133 to 166 It saiz that the 2700+ has a 333Mhz FSB... But that isnt an option in my BIOS. It "saiz" that but I "saiz" FSB needs to be increased from 133 to 166 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
RAM Speed Question 2100 versus 2700 etc. | jm | Homebuilt PC's | 2 | September 4th 04 04:15 AM |
More on REQ: Can DDR 2100 & DDR 2700 be mixed? | [email protected] | General | 3 | December 10th 03 04:21 PM |
REQ: Can DDR 2100 & DDR 2700 be mixed? | [email protected] | General | 1 | December 8th 03 10:41 PM |
HELP!! 2100 or 2700??? | Toby | Overclocking AMD Processors | 35 | November 18th 03 07:08 AM |
Crucial DDR 2100 - how possible to run at 2700 or 400 ? | kony | General | 1 | November 13th 03 05:15 AM |