If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2100 will. Why won't 1700?
I've got a A7NX8, rev.2, Crucial PC2100 Cas 2 DDR, and it'll run a
2100XP+ at 190 fsb(only ran it there a few mins a couple of times--no probs., just played a couple of games), and at 166 fsb for past 5 weeks. It's a T'bred "B" w/mult. unlocked. I've just got a 1700XP+, T'bred "B" w/mult unlocked. Why won't it run at anything above 133? I've upped the cpu-volt to 1.625 in both instances. Am I expecting too much.? Got it to post a couple of times at 11X138 (=1.53) and played just a game or two of Freecell--very little stress--and it reboots on its own there. All advice greatly appreciated.(Can u tell I'm ill-informed about overclocking?) sdlomi |
#2
|
|||
|
|||
tried uppin the voltage ?
"sdlomi" wrote in message ... I've got a A7NX8, rev.2, Crucial PC2100 Cas 2 DDR, and it'll run a 2100XP+ at 190 fsb(only ran it there a few mins a couple of times--no probs., just played a couple of games), and at 166 fsb for past 5 weeks. It's a T'bred "B" w/mult. unlocked. I've just got a 1700XP+, T'bred "B" w/mult unlocked. Why won't it run at anything above 133? I've upped the cpu-volt to 1.625 in both instances. Am I expecting too much.? Got it to post a couple of times at 11X138 (=1.53) and played just a game or two of Freecell--very little stress--and it reboots on its own there. All advice greatly appreciated.(Can u tell I'm ill-informed about overclocking?) sdlomi |
#3
|
|||
|
|||
"Fig (Cable)" wrote in message ... tried uppin the voltage ? "sdlomi" wrote in message ... I've got a A7NX8, rev.2, Crucial PC2100 Cas 2 DDR, and it'll run a 2100XP+ at 190 fsb(only ran it there a few mins a couple of times--no probs., just played a couple of games), and at 166 fsb for past 5 weeks. It's a T'bred "B" w/mult. unlocked. I've just got a 1700XP+, T'bred "B" w/mult unlocked. Why won't it run at anything above 133? I've upped the cpu-volt to 1.625 in both instances. Am I expecting too much.? Got it to post a couple of times at 11X138 (=1.53) and played just a game or two of Freecell--very little stress--and it reboots on its own there. All advice greatly appreciated.(Can u tell I'm ill-informed about overclocking?) sdlomi I noted in 1st post I upped voltage, but just from 1.6 to 1.625. How far can I up it? I have no idea how much is safe. Thx for your help, sdlomi |
#4
|
|||
|
|||
"sdlomi" wrote in message ... "Fig (Cable)" wrote in message ... tried uppin the voltage ? "sdlomi" wrote in message ... I've got a A7NX8, rev.2, Crucial PC2100 Cas 2 DDR, and it'll run a 2100XP+ at 190 fsb(only ran it there a few mins a couple of times--no probs., just played a couple of games), and at 166 fsb for past 5 weeks. It's a T'bred "B" w/mult. unlocked. I've just got a 1700XP+, T'bred "B" w/mult unlocked. Why won't it run at anything above 133? I've upped the cpu-volt to 1.625 in both instances. Am I expecting too much.? Got it to post a couple of times at 11X138 (=1.53) and played just a game or two of Freecell--very little stress--and it reboots on its own there. All advice greatly appreciated.(Can u tell I'm ill-informed about overclocking?) sdlomi I noted in 1st post I upped voltage, but just from 1.6 to 1.625. How far can I up it? I have no idea how much is safe. Thx for your help, sdlomi I'm running my XP2100 at 1.7v with no ill effects. FRH XP2100 FSB210x10.5 / vcore1.7 / Case 32C / CPU 42C / Room Temp 77F (Prime95 stable) |
#5
|
|||
|
|||
"Frank Hagan" wrote in message hlink.net... "sdlomi" wrote in message ... "Fig (Cable)" wrote in message ... tried uppin the voltage ? "sdlomi" wrote in message ... I've got a A7NX8, rev.2, Crucial PC2100 Cas 2 DDR, and it'll run a 2100XP+ at 190 fsb(only ran it there a few mins a couple of times--no probs., just played a couple of games), and at 166 fsb for past 5 weeks. It's a T'bred "B" w/mult. unlocked. I've just got a 1700XP+, T'bred "B" w/mult unlocked. Why won't it run at anything above 133? I've upped the cpu-volt to 1.625 in both instances. Am I expecting too much.? Got it to post a couple of times at 11X138 (=1.53) and played just a game or two of Freecell--very little stress--and it reboots on its own there. All advice greatly appreciated.(Can u tell I'm ill-informed about overclocking?) sdlomi I noted in 1st post I upped voltage, but just from 1.6 to 1.625. How far can I up it? I have no idea how much is safe. Thx for your help, sdlomi I'm running my XP2100 at 1.7v with no ill effects. FRH XP2100 FSB210x10.5 / vcore1.7 / Case 32C / CPU 42C / Room Temp 77F (Prime95 stable) Thanks, Frank & Fig. I tried my 1700 there at 1.7, and it works fine now at 166X11 at 1.7 volts. Temps are staying around 35 & 40 with room at 72F. BTW: I guess my 2100 spoiled me, as it will run 190X13 at 1.6 volt, altho' I upped it to 1.625 just for extra measure. My 2100 ram won't allow for higher fsb, altho' I feel it's going the extra mile doing 190. Kingston HyperX 3500 is on my "get list". With your help, this 1700 now 'feels' much like the 2100 with its snappiness. sdlomi |
#6
|
|||
|
|||
"sdlomi" wrote in message ... "Frank Hagan" wrote in message hlink.net... "sdlomi" wrote in message ... "Fig (Cable)" wrote in message ... tried uppin the voltage ? "sdlomi" wrote in message ... I've got a A7NX8, rev.2, Crucial PC2100 Cas 2 DDR, and it'll run a 2100XP+ at 190 fsb(only ran it there a few mins a couple of times--no probs., just played a couple of games), and at 166 fsb for past 5 weeks. It's a T'bred "B" w/mult. unlocked. I've just got a 1700XP+, T'bred "B" w/mult unlocked. Why won't it run at anything above 133? I've upped the cpu-volt to 1.625 in both instances. Am I expecting too much.? Got it to post a couple of times at 11X138 (=1.53) and played just a game or two of Freecell--very little stress--and it reboots on its own there. All advice greatly appreciated.(Can u tell I'm ill-informed about overclocking?) sdlomi I noted in 1st post I upped voltage, but just from 1.6 to 1.625. How far can I up it? I have no idea how much is safe. Thx for your help, sdlomi I'm running my XP2100 at 1.7v with no ill effects. FRH XP2100 FSB210x10.5 / vcore1.7 / Case 32C / CPU 42C / Room Temp 77F (Prime95 stable) Thanks, Frank & Fig. I tried my 1700 there at 1.7, and it works fine now at 166X11 at 1.7 volts. Temps are staying around 35 & 40 with room at 72F. BTW: I guess my 2100 spoiled me, as it will run 190X13 at 1.6 volt, altho' I upped it to 1.625 just for extra measure. My 2100 ram won't allow for higher fsb, altho' I feel it's going the extra mile doing 190. Kingston HyperX 3500 is on my "get list". With your help, this 1700 now 'feels' much like the 2100 with its snappiness. sdlomi I'm not familiar with your board, but why don't you try raising the FSB in 1MHz increments just for fun? If it becomes unstable or fails to boot drop back and run Prime95 to check stability. If Santa brings you that Kingston you'll be doing over FSB200. I'm using 512MB of DDR400 "mystery memory" I got for $61 on eBay and I get FSB210. I got lucky on that deal ;-) But for now I'm bidding on a XP2500 (0331 unlocked). I'm sure you can go over FSB166. Post your results! FRH FRH |
#7
|
|||
|
|||
I have the same board and processor, but with 2700memory, I can't get past
168 stable. -- A7N8X Deluxe Rev 2.0 | 1007 Über | 1700+ @12 x 168 = 2.02Ghz @1.7v | CorsairTwinX XMS 2700LL (2x256) 6-2-2-2 @2.7v | MSI GeForce4Ti4200 128MB @280/584 | 3DMark=10,658 | CoolerMaster Aero7+ | Microcool Northpole | HS on SB | Diode = 28/34°C | Socket = 35/39°C | Vantec Ion 400W "sdlomi" wrote in message ... I've got a A7NX8, rev.2, Crucial PC2100 Cas 2 DDR, and it'll run a 2100XP+ at 190 fsb(only ran it there a few mins a couple of times--no probs., just played a couple of games), and at 166 fsb for past 5 weeks. It's a T'bred "B" w/mult. unlocked. I've just got a 1700XP+, T'bred "B" w/mult unlocked. Why won't it run at anything above 133? I've upped the cpu-volt to 1.625 in both instances. Am I expecting too much.? Got it to post a couple of times at 11X138 (=1.53) and played just a game or two of Freecell--very little stress--and it reboots on its own there. All advice greatly appreciated.(Can u tell I'm ill-informed about overclocking?) sdlomi |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
3200 and 2100 RAM to mix or not? | Marathon | Overclocking | 5 | September 10th 04 12:35 AM |
Overclocked 2500 Barton to 3200 using my old Crucial 2100 DDR | [email protected] | General | 5 | January 18th 04 09:01 AM |
unlocking 1700 xp | chrisj | Overclocking AMD Processors | 1 | November 14th 03 11:15 PM |
Crucial DDR 2100 - how possible to run at 2700 or 400 ? | kony | General | 1 | November 13th 03 05:15 AM |
1700 DLT3C - A or B? | Kevin | Overclocking AMD Processors | 4 | August 18th 03 08:46 PM |