If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
200fsb at last
just got some new ram ocz ddr platinum 256x2
I can now run my xp2600 at 12x200 to get 2400mhz on a asus a7n8x delux |
#2
|
|||
|
|||
"jibby" wrote in message .. . just got some new ram ocz ddr platinum 256x2 I can now run my xp2600 at 12x200 to get 2400mhz on a asus a7n8x delux I had the cpu and ram for 200 but had to go with a rev 2.0 A7N8X to accieve 2ooFSB myself. Otherboard was Asus A7N8X rev 1.04 and wouldnt run over 180 FSB no matter what I did. Now Im at 210 FSBx11Multi. WCPUID reads me running at 2315Mhz on a 2100+ cpu. Congrats to you on the 200 mark and now try for just a little more OZoNE Overclocking isnt a hobby....its an addiction. -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
#3
|
|||
|
|||
"Tin-Char D'un" wrote in message ... "OZoNE" wrote in message ... "jibby" wrote in message .. . just got some new ram ocz ddr platinum 256x2 I can now run my xp2600 at 12x200 to get 2400mhz on a asus a7n8x delux I had the cpu and ram for 200 but had to go with a rev 2.0 A7N8X to accieve 2ooFSB myself. Otherboard was Asus A7N8X rev 1.04 and wouldnt run over 180 FSB no matter what I did. Now Im at 210 FSBx11Multi. WCPUID reads me running at 2315Mhz on a 2100+ cpu. Congrats to you on the 200 mark and now try for just a little more OZoNE Overclocking isnt a hobby....its an addiction. -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- Funny that ~ I've got a 1.04 board and it runs at 200 no problemo... 1004 BIOS. Seems to be the best BIOS for this board. some 1.04 boards came with a better northbridge then others. you lucked out...i didnt I seen lots of ppl with 1.04/1.06 run 200Mhz bus and same amount not over 180.....that was luck o the draw i guess. Yes I ran 1004 bios also. OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
#4
|
|||
|
|||
"Jada" wrote in message ... What kind of voltage did you guys have to put to the 2500+. I've had 2 that would not do squat (would only work witha 9.5 multi and a max FSB of 214) "OZoNE" wrote: "jibby" wrote in message m... already gone for 218fsb x 11 = 2400 no problems so far 218!!! congrats. I may try for 2350Mhz later and up the bus some more but for now im happy OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- my 2100+ is running at 1.725Vcore with a Volcano 9+. 35c idle/27c system according to mbm. havent seen this cpu run over 52c under heavy load. running at 11.5x200 for 2300Mhz....Asus A7N8X Non-D. OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
#5
|
|||
|
|||
Epox 8RDA3+ (227 FSB : Northbridge 2.0 v-dd with Slim Volcano + 19CFM)
XP1700 DUT3C (10.0 - 2270 MHz stable : 1.9 v-core - Volcano 9 + 75CFM) 2 x OCZ 256MB PC3700 (454 - 7-3-3 / 2.0 dual : 2.9 v-dimm) Gigabyte Radeon 9700 Pro (393/371 : 1.6 v-agp - Slim Volcano + 52CFM) Maxtor DM 9+ (8MB) - 52CFM Vantec 4-channel Fan Control Air - 41/55C 3DMk03 - 5,953 3DMk01 - 18,123 "OZoNE" wrote in message ... "Jada" wrote in message ... What kind of voltage did you guys have to put to the 2500+. I've had 2 that would not do squat (would only work witha 9.5 multi and a max FSB of 214) "OZoNE" wrote: "jibby" wrote in message m... already gone for 218fsb x 11 = 2400 no problems so far 218!!! congrats. I may try for 2350Mhz later and up the bus some more but for now im happy OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- my 2100+ is running at 1.725Vcore with a Volcano 9+. 35c idle/27c system according to mbm. havent seen this cpu run over 52c under heavy load. running at 11.5x200 for 2300Mhz....Asus A7N8X Non-D. OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Any reason to by over pc3200 ram ? ? | We Live For The One We Die For The One | Overclocking | 5 | February 3rd 04 11:51 PM |
Performance decrease at 200FSB?? | Tin-Char D'un | Overclocking AMD Processors | 8 | July 11th 03 02:07 PM |
problem with nf7 v2.0, 200fsb, 2 sticks ram | Geoff | Overclocking AMD Processors | 5 | July 10th 03 01:05 AM |
XP2500 200FSB | Toby Groves | Overclocking AMD Processors | 16 | July 8th 03 09:57 PM |