200Mhz FSB barrier Broken...FINALLY

Well since late jan Ive been trying to get my 2100+ to run over 200Mhz FSB.
I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180.
Right now sitting at 11x210 on a rev 2.0 A7N8X board.
I got same board but newer rev because I really didnt feel like totally
re-installing windows XP.
My cpu Mhz went from 2255 to 2310.
I will try higher multipliers later with perhaps a lower bus (none less then
200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+ speed
set to max rpm (yes loud).
All parts are same excpet the motherboar rev.
OZoNE




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

Craig Stephens wrote:
wow, u ever worry about anything inportant?

Ever post anything useful?

I believe his post was on-topic and relevant, it's not like you contribute
greatly to the group, is it?

Ben
--
I'm not just a number. To many, I'm known as a string...

The later chipset is better. My Soltek FRN-L topped out at 204 fsb, then
with the same components my replacement FRN2-L runs 220 fsb stable, amybe
higher if i push it.

Mike

"OZoNE" wrote in message
...
Well since late jan Ive been trying to get my 2100+ to run over 200Mhz
FSB.
I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180.
Right now sitting at 11x210 on a rev 2.0 A7N8X board.
I got same board but newer rev because I really didnt feel like totally
re-installing windows XP.
My cpu Mhz went from 2255 to 2310.
I will try higher multipliers later with perhaps a lower bus (none less
then
200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+ speed
set to max rpm (yes loud).
All parts are same excpet the motherboar rev.
OZoNE




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

On Mon, 7 Jul 2003 19:23:48 -0400, "OZoNE" wrote:

Well since late jan Ive been trying to get my 2100+ to run over 200Mhz FSB.
I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180.
Right now sitting at 11x210 on a rev 2.0 A7N8X board.
I got same board but newer rev because I really didnt feel like totally
re-installing windows XP.
My cpu Mhz went from 2255 to 2310.
I will try higher multipliers later with perhaps a lower bus (none less then
200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+ speed
set to max rpm (yes loud).
All parts are same excpet the motherboar rev.
OZoNE




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

Congrats to you .. You got to do, what you got to do ... 200 fsb is a good thing )
I was stuck at 178 untill I just sat here and kept trying it was not untill I updated the
bios that I got mine to run 202 fsb 11mult. It will go higher but it works fine for me
rite there on air .. I'm a happy camper now !

200x11@=2200 runs stable for me
"OZoNE" wrote in message
...
Well since late jan Ive been trying to get my 2100+ to run over 200Mhz
FSB.
I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180.
Right now sitting at 11x210 on a rev 2.0 A7N8X board.
I got same board but newer rev because I really didnt feel like totally
re-installing windows XP.
My cpu Mhz went from 2255 to 2310.
I will try higher multipliers later with perhaps a lower bus (none less
then
200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+ speed
set to max rpm (yes loud).
All parts are same excpet the motherboar rev.
OZoNE




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

"Craig Stephens" wrote in message
...
wow, u ever worry about anything inportant?
"OZoNE" wrote in message
...
Well since late jan Ive been trying to get my 2100+ to run over 200Mhz
FSB.
I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180.
Right now sitting at 11x210 on a rev 2.0 A7N8X board.
I got same board but newer rev because I really didnt feel like totally
re-installing windows XP.
My cpu Mhz went from 2255 to 2310.
I will try higher multipliers later with perhaps a lower bus (none less
then
200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+
speed
set to max rpm (yes loud).
All parts are same excpet the motherboar rev.
OZoNE




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----


well lets see in a Overclocking NewsGroup it is importent to let others know
how I got the 200Mhz fsb.
for me it took a board swap.
for others extreme cooling.
OZoNE




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----