If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
200Mhz FSB barrier Broken...FINALLY
Well since late jan Ive been trying to get my 2100+ to run over 200Mhz FSB.
I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180. Right now sitting at 11x210 on a rev 2.0 A7N8X board. I got same board but newer rev because I really didnt feel like totally re-installing windows XP. My cpu Mhz went from 2255 to 2310. I will try higher multipliers later with perhaps a lower bus (none less then 200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+ speed set to max rpm (yes loud). All parts are same excpet the motherboar rev. OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
#2
|
|||
|
|||
Craig Stephens wrote:
wow, u ever worry about anything inportant? Ever post anything useful? I believe his post was on-topic and relevant, it's not like you contribute greatly to the group, is it? Ben -- I'm not just a number. To many, I'm known as a string... |
#3
|
|||
|
|||
The later chipset is better. My Soltek FRN-L topped out at 204 fsb, then
with the same components my replacement FRN2-L runs 220 fsb stable, amybe higher if i push it. Mike "OZoNE" wrote in message ... Well since late jan Ive been trying to get my 2100+ to run over 200Mhz FSB. I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180. Right now sitting at 11x210 on a rev 2.0 A7N8X board. I got same board but newer rev because I really didnt feel like totally re-installing windows XP. My cpu Mhz went from 2255 to 2310. I will try higher multipliers later with perhaps a lower bus (none less then 200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+ speed set to max rpm (yes loud). All parts are same excpet the motherboar rev. OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
#4
|
|||
|
|||
On Mon, 7 Jul 2003 19:23:48 -0400, "OZoNE" wrote:
Well since late jan Ive been trying to get my 2100+ to run over 200Mhz FSB. I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180. Right now sitting at 11x210 on a rev 2.0 A7N8X board. I got same board but newer rev because I really didnt feel like totally re-installing windows XP. My cpu Mhz went from 2255 to 2310. I will try higher multipliers later with perhaps a lower bus (none less then 200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+ speed set to max rpm (yes loud). All parts are same excpet the motherboar rev. OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- Congrats to you .. You got to do, what you got to do ... 200 fsb is a good thing ) I was stuck at 178 untill I just sat here and kept trying it was not untill I updated the bios that I got mine to run 202 fsb 11mult. It will go higher but it works fine for me rite there on air .. I'm a happy camper now ! |
#5
|
|||
|
|||
200x11@=2200 runs stable for me
"OZoNE" wrote in message ... Well since late jan Ive been trying to get my 2100+ to run over 200Mhz FSB. I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180. Right now sitting at 11x210 on a rev 2.0 A7N8X board. I got same board but newer rev because I really didnt feel like totally re-installing windows XP. My cpu Mhz went from 2255 to 2310. I will try higher multipliers later with perhaps a lower bus (none less then 200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+ speed set to max rpm (yes loud). All parts are same excpet the motherboar rev. OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
#6
|
|||
|
|||
"Craig Stephens" wrote in message ... wow, u ever worry about anything inportant? "OZoNE" wrote in message ... Well since late jan Ive been trying to get my 2100+ to run over 200Mhz FSB. I was using a rev 1.04 A7N8X and couldnt get the ******* over 12.5x180. Right now sitting at 11x210 on a rev 2.0 A7N8X board. I got same board but newer rev because I really didnt feel like totally re-installing windows XP. My cpu Mhz went from 2255 to 2310. I will try higher multipliers later with perhaps a lower bus (none less then 200) to see if I can achieve the 2400Mhz mark on air.....Volcano 9+ speed set to max rpm (yes loud). All parts are same excpet the motherboar rev. OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- well lets see in a Overclocking NewsGroup it is importent to let others know how I got the 200Mhz fsb. for me it took a board swap. for others extreme cooling. OZoNE -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I finally overloaded my power supply... | Steve Wolfe | Overclocking | 2 | September 17th 04 04:52 AM |
Recommend a FAN for the Pentium Pro 1MB 200MHz | rcm | Overclocking | 3 | June 23rd 04 08:58 PM |
Modem - dial tone broken up, but voice ok | Zardoz | General | 1 | January 5th 04 02:06 AM |