If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
6200 is driving me nuts!
Hi All,
This is driving me nuts! A few days ago I bought a new flatpanel monitor(Samsung 920N) and a new videocard geforce 6200. So far so good, Installation was no problem at all. Exept now my Computer is hanging and won"t do what it"s supposed to do. Just after the welcoming screen the monitor went black while the computer itself seems to start in a normal way. Itried to tackle the problem myself bij replacing the new monitor with my old monitor bit its act in the same way. Reinstalling the old videocard(nvidia 5200) and it works fine on both monitors, installing the newly bought 6200,,and yes the same problem.Installed upto three 6200 cards(Luckilly my vendor lives nearby) and they all have the seems problem...To be short...HELP!!!!!!! Why won"t thisXXXXX Card mot work with my configuration. Needles to say that I installed the latest drivers. Msi Mobo 1500 pentium 4 BTW mvg Fred From Holland |
#2
|
|||
|
|||
6200 is driving me nuts!
Why did you go from a 5200 to 6200? There's hardly any speed increase...
-- "War is the continuation of politics by other means. It can therefore be said that politics is war without bloodshed while war is politics with bloodshed." "fred" wrote in message ... Hi All, This is driving me nuts! A few days ago I bought a new flatpanel monitor(Samsung 920N) and a new videocard geforce 6200. So far so good, Installation was no problem at all. Exept now my Computer is hanging and won"t do what it"s supposed to do. Just after the welcoming screen the monitor went black while the computer itself seems to start in a normal way. Itried to tackle the problem myself bij replacing the new monitor with my old monitor bit its act in the same way. Reinstalling the old videocard(nvidia 5200) and it works fine on both monitors, installing the newly bought 6200,,and yes the same problem.Installed upto three 6200 cards(Luckilly my vendor lives nearby) and they all have the seems problem...To be short...HELP!!!!!!! Why won"t thisXXXXX Card mot work with my configuration. Needles to say that I installed the latest drivers. Msi Mobo 1500 pentium 4 BTW mvg Fred From Holland |
#3
|
|||
|
|||
6200 is driving me nuts!
On Sat, 6 May 2006 18:03:20 +0200, fred wrote:
Hi All, This is driving me nuts! A few days ago I bought a new flatpanel monitor(Samsung 920N) and a new videocard geforce 6200. So far so good, Installation was no problem at all. Exept now my Computer is hanging and won"t do what it"s supposed to do. Just after the welcoming screen the monitor went black while the computer itself seems to start in a normal way. Itried to tackle the problem myself bij replacing the new monitor with my old monitor bit its act in the same way. Reinstalling the old videocard(nvidia 5200) and it works fine on both monitors, installing the newly bought 6200,,and yes the same problem.Installed upto three 6200 cards(Luckilly my vendor lives nearby) and they all have the seems problem...To be short...HELP!!!!!!! Why won"t thisXXXXX Card mot work with my configuration. Needles to say that I installed the latest drivers. Msi Mobo 1500 pentium 4 BTW mvg Fred From Holland I just upgraded to the 6200 from a GeForce2 MX and so far no problems. Installation was a snap too. I think my BIOS is very forgiving, since a lot of its settings are just defaulted to "Auto". Also, you might want to make sure you have your chipset drivers all installed, especially for AGP. I left my NForce2 drivers as they were to the newest version and so good, so far. Keeping my fingers crossed. Patty |
#4
|
|||
|
|||
6200 is driving me nuts!
That"s not the issue..sorry
"First of One" schreef in bericht ... Why did you go from a 5200 to 6200? There's hardly any speed increase... -- "War is the continuation of politics by other means. It can therefore be said that politics is war without bloodshed while war is politics with bloodshed." "fred" wrote in message ... Hi All, This is driving me nuts! A few days ago I bought a new flatpanel monitor(Samsung 920N) and a new videocard geforce 6200. So far so good, Installation was no problem at all. Exept now my Computer is hanging and won"t do what it"s supposed to do. Just after the welcoming screen the monitor went black while the computer itself seems to start in a normal way. Itried to tackle the problem myself bij replacing the new monitor with my old monitor bit its act in the same way. Reinstalling the old videocard(nvidia 5200) and it works fine on both monitors, installing the newly bought 6200,,and yes the same problem.Installed upto three 6200 cards(Luckilly my vendor lives nearby) and they all have the seems problem...To be short...HELP!!!!!!! Why won"t thisXXXXX Card mot work with my configuration. Needles to say that I installed the latest drivers. Msi Mobo 1500 pentium 4 BTW mvg Fred From Holland |
#5
|
|||
|
|||
6200 is driving me nuts!
On Mon, 08 May 2006 02:57:22 GMT, nope wrote:
I have an EVGA 6200 card that I can't get working in one system but it works in another. What power supply do you have? I wish I had bought a different card. For 5 more I could have gotten a 9800SE. Mine is an XFX 6200. I'm using an Enermax 350w power supply. I was told that the 6200 didn't need a whole lot of power to run. Perhaps it's some BIOS settings that are causing problems with the one system? Patty |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
This is driving me nuts... | Ed Cregger | Homebuilt PC's | 24 | November 30th 05 01:19 AM |
P4P800-E "overclocking failed" msg driving me nuts | Peggy | Asus Motherboards | 1 | March 30th 05 07:39 PM |
Tripplite Alarm is driving me nuts! | KeyBored | Homebuilt PC's | 1 | August 21st 04 03:37 AM |
mouse random freeze, pointer losing focus driving me nuts | rodrigo | Asus Motherboards | 10 | August 2nd 04 04:35 AM |
Chassis Intruder alert feature on P4S800D-E driving me nuts !!! HELP ! | Doug.M | Asus Motherboards | 1 | June 8th 04 10:02 AM |