A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Asus Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Asus P4C800 Deluxe ATA SATA and RAID Promise FastTrack 378 Drivers and more.



 
 
Thread Tools Display Modes
  #1  
Old August 8th 04, 10:56 PM
Julian
external usenet poster
 
Posts: n/a
Default Asus P4C800 Deluxe ATA SATA and RAID Promise FastTrack 378 Drivers and more.

The Asus P4C800 Deluxe Promise RAID OEM implementation .

I hope that would be some Pro that would clarify once and for good for the
masses with some computer knowledge which I consider part of myself.
Many thanks in advance for that.

Useful Links related to my questions (so nobody would answer the clasical:
"Go and read the Manual"):

Overview P4C800 Deluxe:

http://www.asus.com/products/mb/sock...d/overview.htm

Specs P4C800 Deluxe :

http://www.asus.com/prog/spec.asp?m=...eluxe&langs=01

Drivers for P4C800 Deluxe:

http://www.asus.com.tw/support/downl...xe&Type=Latest

Related non-OEM products from Promise's website:

Serial / ATA Card - FastTrak S150 TX2plus

http://www.promise.com/product/produ...107&familyId=2

Serial /ATA Card (non-RAID) - SATA150 TX2plus

http://www.promise.com/product/produ...=97&familyId=3

1.) From the Specs and Overview and reading the Manual we get the following
info:

""The P4C800 Deluxe offers the most complete RAID solution. A Promise SATA
controller offers RAID 0, 1 and 10 functions with Max. 2 UltraATA 133 ports
and 2 SATA HD ports, enabling users to build a RAID array with any 2, 3 or 4
of the ports. With unique multi-RAID function, RAID 0 and RAID 1 array can
co-exist."

""Promise 20378 RAID controller:
1 x UltraDMA 133 support two hard drives
2 x Serial ATA
RAID 0, RAID 1, RAID 0+1, Multiple RAID"

My question: Does it mean that we can use the following cominations?:

1.1 - two SATA HDDs connected to the SATA ports, in RAID 0
1.2 - two ATA HDDs connected to the ATA ports, in RAID 0
1.3 - one SATA HDD connected to a SATA port and one ATA HDD connected to the
ATA port, in RAID 0
1.4 - one SATA RAID array and one ATA RAID array in the same time
1.5 - two (one SATA + one ATA) RAID arrays
1.6 - one SATA RAID 0 array mirrored on a HDD of equal or larger size
connected to an ATA port (RAID 0+1)
1.7 - one SATA RAID 0 array mirrored on a RAID 0 array connected to ATA
(RAID 0+1)
1.8 - SATA or ATA HDDs, maximum four, used independently on any port
1.9 - one RAID (0 or 1) array and one or two independent HDDs (lets say for
storage etc)


2.) Second question is related to the DRIVERS I have to use for my Promise
FastTrack 378 (chipset PDC20378) integrated (OEM) controller.
On ASUS's website I found three types of drivers for download:

A - 378raid_100137.zip that is explained as : "Promise FastTrak 378 RAID
Driver V1.00.1.37 for Windows 98SE/NT4/ME/2000/XP/2003" or "FastTrak 376/378
Driver" in the README file.
B - 378ata_100104528.zip that is explained as : "Promise SATA378 Driver
V1.00.0.26 (ATA Mode) " or "Promise SATA378 Driver" in the README file.
C - 378ATA100130.zip that is explained as : "Promise FastTrak 378 ATA Driver
V1.00.1.30 " or "Promise SATA378 Driver" in the README file.

On the original ASUS CD that came with my motherboard I found the following
drivers:

A (CD) - 378ATA explained as "Promise SATA378 Driver" in the README file
B (CD) - 378RAID explained as "FastTrak 376/378 Driver" in the README file

There are also two .doc files "FastTrak 378 Quick Start Guide v1.0_OEM" and
"SATA 378 Quick Start Guide v1.0_OEM"

There is NO clear explanation in the Manual, README files or other docs on
why are two or three types of drivers for the same chipset. It seems that
this Promise FastTrak 378 controller OEM card can be used as a RAID
controller (see SATA150 TX2plus) or as SATA/ATA simple ports (see S150
TX2plus) extention card, but not both in the same time (is my question 1.9
valid then?!?). Why Promise creates two non-OEM (FastTrak S150 TX2plus and
SATA150 TX2plus) cards and one "two in one" sollution for OEM then? Why
there are two SATA drivers ('B' and 'C') on Asus web site, one branded as
"ATA mode"?!?

Related to these questions above I found some answres in Google\Group, but
none very clear.

3.) Third question: Is the Promise OEM BIOS integrated with the motherboard
BIOS? I think I've seen in one of BIOS update ROM file related README file
that the "Promise FastTrak BIOS will be updated together with this file".
What does it mean?

4.) Fourth question. For the moment I'm using two 80Gb Seagate SATA HDDs in
RAID 0 with Windows XP Pro SP1 installed. Under Device Manager \ SCSI and
RAID Controllers tab I can see the following:

A. - SCSI\RAID Host Controller
B. - Win XP Promise FastTrack 376/378 (tm) Controller
C. - XMASSCSI SCSI Controller

I can understand what 'B' is, but not 'A' and 'C'.

5.) Fifth question: The SATA connectors controlled by the ICH5 chipset.
Where are the drivers for them? I read somewhere that SP1 introduced them.
What about Win XP before SP1. There is now download link on Asus website. Or
maybe is the Intel(R) Chipset Software Installation Utility that provides
some SATA support? Correct me if I'm wrong.

Under Device Manager \ IDE ATA/ATAPI ontrollers I have the following:

A. - Intel(R) 82801EB Ultra ATA Storage Controllers
B. - Primary IDE channel
C. - Secondary IDE channel

Is 'A' the SATA driver for the two SATA (ICH5) ports on my motherboard?


Many thanks in advance,
Julian


  #2  
Old August 9th 04, 11:10 AM
Paul
external usenet poster
 
Posts: n/a
Default

In article , "Julian" wrote:

The Asus P4C800 Deluxe Promise RAID OEM implementation .

I hope that would be some Pro that would clarify once and for good for the
masses with some computer knowledge which I consider part of myself.
Many thanks in advance for that.

There are plenty of pros, I'm not one of them :-)

links snipped

1.) From the Specs and Overview and reading the Manual we get the following
info:

""The P4C800 Deluxe offers the most complete RAID solution. A Promise SATA
controller offers RAID 0, 1 and 10 functions with Max. 2 UltraATA 133 ports
and 2 SATA HD ports, enabling users to build a RAID array with any 2, 3 or 4
of the ports. With unique multi-RAID function, RAID 0 and RAID 1 array can
co-exist."

""Promise 20378 RAID controller:
1 x UltraDMA 133 support two hard drives
2 x Serial ATA
RAID 0, RAID 1, RAID 0+1, Multiple RAID"

My question: Does it mean that we can use the following cominations?:

1.1 - two SATA HDDs connected to the SATA ports, in RAID 0
1.2 - two ATA HDDs connected to the ATA ports, in RAID 0
1.3 - one SATA HDD connected to a SATA port and one ATA HDD connected to the
ATA port, in RAID 0
1.4 - one SATA RAID array and one ATA RAID array in the same time
1.5 - two (one SATA + one ATA) RAID arrays
1.6 - one SATA RAID 0 array mirrored on a HDD of equal or larger size
connected to an ATA port (RAID 0+1)
1.7 - one SATA RAID 0 array mirrored on a RAID 0 array connected to ATA
(RAID 0+1)
1.8 - SATA or ATA HDDs, maximum four, used independently on any port
1.9 - one RAID (0 or 1) array and one or two independent HDDs (lets say for
storage etc)

There are two documents, a Fasttrak 378 document, and a SATA 378 document
on the motherboard CD in the manuals directory. While they don't shed much
light on how many arrays are available, at least one of the interfaces
has room to display multiple arrays.

Your 1.2 config is possible, but not recommended. Users have noticed
performance drops with any product, when an array is placed on the
same IDE cable. It is better to pair a SATA + an IDE, to make a array,
as the packet data gets to travel on separate cables during an operation
to an array. Since no drive by itself can exceed the data rate of the
SATA cable or the IDE cable, the odd mixture shouldn't be a problem.

1.1, 1.2, 1.3, 1.4, 1.5, 1.7 Sounds good.
1.6 Not sure, not likely
1.8 Quite likely, especially with the ATA driver (378ATA100130.zip)
1.9 Tricky. I thought single drives can run under the RAID BIOS,
so it should work.

Please remember that no manufacturer is as methodical as you are (in
their documentation), and no single user has tested even a fraction
of these combinations. Most people are happy to get these on-board
solutions to do a single RAID0 or RAID1. I mean, I cannot think of
one stinking manual that states that a single drive will work by
itself on one of these types of RAID controllers - thus that same
question is asked over and over again.


2.) Second question is related to the DRIVERS I have to use for my Promise
FastTrack 378 (chipset PDC20378) integrated (OEM) controller.
On ASUS's website I found three types of drivers for download:

A - 378raid_100137.zip that is explained as : "Promise FastTrak 378 RAID
Driver V1.00.1.37 for Windows 98SE/NT4/ME/2000/XP/2003" or "FastTrak 376/378
Driver" in the README file.
B - 378ata_100104528.zip that is explained as : "Promise SATA378 Driver
V1.00.0.26 (ATA Mode) " or "Promise SATA378 Driver" in the README file.
C - 378ATA100130.zip that is explained as : "Promise FastTrak 378 ATA Driver
V1.00.1.30 " or "Promise SATA378 Driver" in the README file.

On the original ASUS CD that came with my motherboard I found the following
drivers:

A (CD) - 378ATA explained as "Promise SATA378 Driver" in the README file
B (CD) - 378RAID explained as "FastTrak 376/378 Driver" in the README file

There are also two .doc files "FastTrak 378 Quick Start Guide v1.0_OEM" and
"SATA 378 Quick Start Guide v1.0_OEM"

There is NO clear explanation in the Manual, README files or other docs on
why are two or three types of drivers for the same chipset. It seems that
this Promise FastTrak 378 controller OEM card can be used as a RAID
controller (see SATA150 TX2plus) or as SATA/ATA simple ports (see S150
TX2plus) extention card, but not both in the same time (is my question 1.9
valid then?!?).


As far as I know, single drives can be used on a RAID controller.
For example, imagine a broken mirror, it has to work too.

The advantage of the ATA driver, is that there is no dependency on
the "hidden sector" and its contents. And possibly, a difference in
performance by not having to go through the RAID driver code.

Why Promise creates two non-OEM (FastTrak S150 TX2plus and
SATA150 TX2plus) cards and one "two in one" sollution for OEM then? Why
there are two SATA drivers ('B' and 'C') on Asus web site, one branded as
"ATA mode"?!?


Two price points. If you pay $$$ for a RAID card, you aren't likely
to neuter it by running the ATA driver. I presume the chip is jumpered
appropriately to prevent using the ATA version as a RAID. Just a guess.


Related to these questions above I found some answres in Google\Group, but
none very clear.

3.) Third question: Is the Promise OEM BIOS integrated with the motherboard
BIOS? I think I've seen in one of BIOS update ROM file related README file
that the "Promise FastTrak BIOS will be updated together with this file".
What does it mean?


Yes. The BIOS in the motherboard flash chip is actually a miniature
file system. One of the files inside the BIOS is the Promise RAID
code that runs in the BIOS screen. You need to upgrade the motherboard
BIOS to get a newer Promise BIOS.


4.) Fourth question. For the moment I'm using two 80Gb Seagate SATA HDDs in
RAID 0 with Windows XP Pro SP1 installed. Under Device Manager \ SCSI and
RAID Controllers tab I can see the following:

A. - SCSI\RAID Host Controller
B. - Win XP Promise FastTrack 376/378 (tm) Controller
C. - XMASSCSI SCSI Controller

I can understand what 'B' is, but not 'A' and 'C'.


No idea. Item "C" is particularly clever, whatever it is :-)


5.) Fifth question: The SATA connectors controlled by the ICH5 chipset.
Where are the drivers for them? I read somewhere that SP1 introduced them.
What about Win XP before SP1. There is now download link on Asus website. Or
maybe is the Intel(R) Chipset Software Installation Utility that provides
some SATA support? Correct me if I'm wrong.

Under Device Manager \ IDE ATA/ATAPI ontrollers I have the following:

A. - Intel(R) 82801EB Ultra ATA Storage Controllers
B. - Primary IDE channel
C. - Secondary IDE channel

Is 'A' the SATA driver for the two SATA (ICH5) ports on my motherboard?


Many thanks in advance,
Julian


AFAIK, when an ICH5 type southbridge is run in non-RAID mode, the
drivers are in the OS. In compatible mode, an older OS like Win98
access the hardware via I/O addresses. In enhanced mode, an OS like
Win2K or WinXP accesses the hardware via PCI addresses. I believe in
both cases, there is a driver in the OS appropriate to the situation.
The third case, is an ICH5R SATA ports, where RAID has been enabled.
You can use the Intel Application Accelerator RAID driver, such as
IAAR35. It is not part of INFINST (the chipset drivers). You can
download this from the Intel site if you want. It runs under WinXP.
Again, no idea what you will see in the Device Manager. I'm not a
RAID guy.

HTH,
Paul
  #3  
Old August 11th 04, 12:43 PM
Julian
external usenet poster
 
Posts: n/a
Default

Great answers. Sorry for delay on my reply.


The advantage of the ATA driver, is that there is no dependency on
the "hidden sector" and its contents. And possibly, a difference in
performance by not having to go through the RAID driver code.


This is a bit too technical for me. Could you detail it a bit?


AFAIK, when an ICH5 type southbridge is run in non-RAID mode, the
drivers are in the OS. In compatible mode, an older OS like Win98
access the hardware via I/O addresses. In enhanced mode, an OS like
Win2K or WinXP accesses the hardware via PCI addresses. I believe in
both cases, there is a driver in the OS appropriate to the situation.
The third case, is an ICH5R SATA ports, where RAID has been enabled.
You can use the Intel Application Accelerator RAID driver, such as
IAAR35. It is not part of INFINST (the chipset drivers). You can
download this from the Intel site if you want. It runs under WinXP.
Again, no idea what you will see in the Device Manager. I'm not a
RAID guy.


Also, more detail on Compatible versus Enhanced mode.


Julian


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
P4C800E Deluxe Intel SATA RAID vs. Promise SATA RAID mpsan Asus Motherboards 11 May 5th 04 01:50 AM
Getting a weird Promise RAID (Win XP) error with my ASUS P4C800 Deluxe M. B. Asus Motherboards 5 February 9th 04 01:19 AM
Asus P4C800-E Deluxe motherboard - SATA RAID - How many hard drives Thomas Frayne Homebuilt PC's 0 November 26th 03 06:15 PM
DAW & Windows XP RAID Tips, ProTools error -9086 Giganews Asus Motherboards 0 October 24th 03 06:45 AM
P4C800 deluxe mirror raid as storage only OS on SATA drive Tim Asus Motherboards 0 July 18th 03 06:37 PM


All times are GMT +1. The time now is 10:09 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.