If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Is My Burner Broken?
Everytime I try to burn something I get a drive speed error. I tried
different media too, it happened all of a sudden, I didn't change a thing. I presented this log to Nero Support and they tell me to upgrade my Nero 5 to the latest version (I'm using Nero 6). Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 8/24/1999 9:55:32 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.15 Recorder: AOPEN CRW1232 Version: 1.31 - HA 2 TA 1 - 6.3.1.15 Adapter driver: IdeChnDr HA 2 Drive buffer : 4096kB Bus Type : default (0) - ATAPI, detected: ATAPI CD-ROM: AOPEN CRW1232 Version: 1.31 - HA 2 TA 1 - 6.3.1.15 Adapter driver: IdeChnDr HA 2 === Scsi-Device-Map === DiskPeripheral : Promise 3+0 Stripe/RAID01.10 fasttx2k Port 0 ID 0 DMA: Off CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B IdeChnDr Port 2 ID 0 DMA: On CdRomPeripheral : AOPEN CRW1232 IdeChnDr Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8161 D: CDRom0 AOPEN CRW1232 E: CDRom1 Generic DVD-ROM F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523732kB) Free physical memory: 68MB (70488kB) Memory in use : 86 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.8.2004 CD-ROM (Boot) 8:40:57 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : DOS Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : FALSE 8:40:57 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 8:40:57 PM #3 Text 0 File Writer.cpp, Line 124 Writer AOPEN CRW1232 running 8:40:57 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:40:58 PM #5 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-at-once, using CD-R/RW media 8:40:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 299651 ( 66:37.26) 8:40:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 8:40:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: AOPEN CRW1232; CDR code: 00 97 27 28; OSJ entry from: Princo Corporation ATIP Data: Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 8:40:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 418 Protocol of DlgWaitCD activities: ========================================= 8:40:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 299652 (299652) = #299652/66:35.27 relocatable, disc pos for caching/writing not required/required, no patch infos - TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 299652 blocks [AOPEN CRW1232 ] -------------------------------------------------------------- 8:40:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 983 Prepare recorder [AOPEN CRW1232 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 613994496, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 299652 | lead-out | 1 | 0x00 | 0x41 8:40:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 8:41:18 PM #13 Text 0 File Burncd.cpp, Line 4177 Cache writing successful. 8:41:18 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 8:41:18 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 8x (1,200 KB/s) 8:41:18 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2343 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:41:18 PM #17 Text 0 File Mmc.cpp, Line 15624 StartDAO : CD-Text - Off 8:41:18 PM #18 Text 0 File Mmc.cpp, Line 15911 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 42 25 1b 8:41:23 PM #19 SCSI -1152 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x64 Sense Qual: 0xC0 CDB Data: 0x54 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x64 0xC0 8:41:28 PM #20 SCSI -1152 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x037F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x64 Sense Qual: 0xC0 CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x64 0xC0 8:41:28 PM #21 CDR -1152 File Writer.cpp, Line 304 Disc speed error 8:41:28 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:41:29 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:41:29 PM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) - OK 8:41:29 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 8x (1,200 KB/s) Existing drivers: File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=101431 bytes, created 10/15/2002 1:00:00 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
#2
|
|||
|
|||
I've had similar problems and usually just reinstalling the software has
fixed them. A DLL file gets damaged or changed and it causes issues. Since you have XP, you should be able to record without adding any software. Select some files, right click, Send To-CD Drive X: ... You should then be able to open your CD drive in MY COMPUTER, right click and choose "Write these files..." If you have a second PC, you could try moving the drive over to test it. This would eliminate the software being broken if you had the same problem. "ggroups2" wrote in message ... Everytime I try to burn something I get a drive speed error. I tried different media too, it happened all of a sudden, I didn't change a thing. I presented this log to Nero Support and they tell me to upgrade my Nero 5 to the latest version (I'm using Nero 6). Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 8/24/1999 9:55:32 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.15 Recorder: AOPEN CRW1232 Version: 1.31 - HA 2 TA 1 - 6.3.1.15 Adapter driver: IdeChnDr HA 2 Drive buffer : 4096kB Bus Type : default (0) - ATAPI, detected: ATAPI CD-ROM: AOPEN CRW1232 Version: 1.31 - HA 2 TA 1 - 6.3.1.15 Adapter driver: IdeChnDr HA 2 === Scsi-Device-Map === DiskPeripheral : Promise 3+0 Stripe/RAID01.10 fasttx2k Port 0 ID 0 DMA: Off CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B IdeChnDr Port 2 ID 0 DMA: On CdRomPeripheral : AOPEN CRW1232 IdeChnDr Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8161 D: CDRom0 AOPEN CRW1232 E: CDRom1 Generic DVD-ROM F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523732kB) Free physical memory: 68MB (70488kB) Memory in use : 86 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.8.2004 CD-ROM (Boot) 8:40:57 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : DOS Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : FALSE 8:40:57 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 8:40:57 PM #3 Text 0 File Writer.cpp, Line 124 Writer AOPEN CRW1232 running 8:40:57 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:40:58 PM #5 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-at-once, using CD-R/RW media 8:40:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 299651 ( 66:37.26) 8:40:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 8:40:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: AOPEN CRW1232; CDR code: 00 97 27 28; OSJ entry from: Princo Corporation ATIP Data: Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 8:40:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 418 Protocol of DlgWaitCD activities: ========================================= 8:40:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 299652 (299652) = #299652/66:35.27 relocatable, disc pos for caching/writing not required/required, no patch infos - TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 299652 blocks [AOPEN CRW1232 ] -------------------------------------------------------------- 8:40:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 983 Prepare recorder [AOPEN CRW1232 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 613994496, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 299652 | lead-out | 1 | 0x00 | 0x41 8:40:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 8:41:18 PM #13 Text 0 File Burncd.cpp, Line 4177 Cache writing successful. 8:41:18 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 8:41:18 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 8x (1,200 KB/s) 8:41:18 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2343 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:41:18 PM #17 Text 0 File Mmc.cpp, Line 15624 StartDAO : CD-Text - Off 8:41:18 PM #18 Text 0 File Mmc.cpp, Line 15911 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 42 25 1b 8:41:23 PM #19 SCSI -1152 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x64 Sense Qual: 0xC0 CDB Data: 0x54 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x64 0xC0 8:41:28 PM #20 SCSI -1152 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x037F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x64 Sense Qual: 0xC0 CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x64 0xC0 8:41:28 PM #21 CDR -1152 File Writer.cpp, Line 304 Disc speed error 8:41:28 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:41:29 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:41:29 PM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) - OK 8:41:29 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 8x (1,200 KB/s) Existing drivers: File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=101431 bytes, created 10/15/2002 1:00:00 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
#3
|
|||
|
|||
Reinstalling the software is a good idea. I recommend not installing
the packet writing software, and just installing the mastering software. Also burn the CD from the hard drive. Make sure to defragment the hard drive on a regular basis. Noozer wrote: I've had similar problems and usually just reinstalling the software has fixed them. A DLL file gets damaged or changed and it causes issues. Since you have XP, you should be able to record without adding any software. Select some files, right click, Send To-CD Drive X: ... You should then be able to open your CD drive in MY COMPUTER, right click and choose "Write these files..." If you have a second PC, you could try moving the drive over to test it. This would eliminate the software being broken if you had the same problem. "ggroups2" wrote in message ... Everytime I try to burn something I get a drive speed error. I tried different media too, it happened all of a sudden, I didn't change a thing. I presented this log to Nero Support and they tell me to upgrade my Nero 5 to the latest version (I'm using Nero 6). Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 8/24/1999 9:55:32 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.15 Recorder: AOPEN CRW1232 Version: 1.31 - HA 2 TA 1 - 6.3.1.15 Adapter driver: IdeChnDr HA 2 Drive buffer : 4096kB Bus Type : default (0) - ATAPI, detected: ATAPI CD-ROM: AOPEN CRW1232 Version: 1.31 - HA 2 TA 1 - 6.3.1.15 Adapter driver: IdeChnDr HA 2 === Scsi-Device-Map === DiskPeripheral : Promise 3+0 Stripe/RAID01.10 fasttx2k Port 0 ID 0 DMA: Off CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B IdeChnDr Port 2 ID 0 DMA: On CdRomPeripheral : AOPEN CRW1232 IdeChnDr Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8161 D: CDRom0 AOPEN CRW1232 E: CDRom1 Generic DVD-ROM F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523732kB) Free physical memory: 68MB (70488kB) Memory in use : 86 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.8.2004 CD-ROM (Boot) 8:40:57 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : DOS Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : FALSE 8:40:57 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 8:40:57 PM #3 Text 0 File Writer.cpp, Line 124 Writer AOPEN CRW1232 running 8:40:57 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:40:58 PM #5 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-at-once, using CD-R/RW media 8:40:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 299651 ( 66:37.26) 8:40:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 8:40:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: AOPEN CRW1232; CDR code: 00 97 27 28; OSJ entry from: Princo Corporation ATIP Data: Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 8:40:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 418 Protocol of DlgWaitCD activities: ========================================= 8:40:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 299652 (299652) = #299652/66:35.27 relocatable, disc pos for caching/writing not required/required, no patch infos - TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 299652 blocks [AOPEN CRW1232 ] -------------------------------------------------------------- 8:40:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 983 Prepare recorder [AOPEN CRW1232 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 613994496, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 299652 | lead-out | 1 | 0x00 | 0x41 8:40:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 8:41:18 PM #13 Text 0 File Burncd.cpp, Line 4177 Cache writing successful. 8:41:18 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 8:41:18 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 8x (1,200 KB/s) 8:41:18 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2343 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:41:18 PM #17 Text 0 File Mmc.cpp, Line 15624 StartDAO : CD-Text - Off 8:41:18 PM #18 Text 0 File Mmc.cpp, Line 15911 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 42 25 1b 8:41:23 PM #19 SCSI -1152 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x64 Sense Qual: 0xC0 CDB Data: 0x54 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x64 0xC0 8:41:28 PM #20 SCSI -1152 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x037F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x64 Sense Qual: 0xC0 CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x64 0xC0 8:41:28 PM #21 CDR -1152 File Writer.cpp, Line 304 Disc speed error 8:41:28 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:41:29 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:41:29 PM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) - OK 8:41:29 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 8x (1,200 KB/s) Existing drivers: File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=101431 bytes, created 10/15/2002 1:00:00 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
#4
|
|||
|
|||
I tried all those things and put it in another computer.
Anyway I think I totally broke it when I took it apart and put it back together. Won't read cds anymore. Oh well time to get a new one. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Slowest cd burning speed on dvd burner | Chris | General | 1 | April 3rd 04 01:54 AM |
DVD Burner For Laptop | Buck Turgidson | General | 3 | March 10th 04 03:23 AM |
Modem - dial tone broken up, but voice ok | Zardoz | General | 1 | January 5th 04 02:06 AM |
DVD Burner in 5 Year-old PC | Buck Turgidson | General | 3 | December 6th 03 06:58 PM |
CD & DVD burner on Primary/Secondary Master IDE channel | @drian | General | 2 | November 13th 03 09:59 AM |