If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Any tips on getting a AMD mobile 2500 to maxium possible speed ?
Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. |
#2
|
|||
|
|||
On Fri, 23 Jul 2004 03:37:46 +1000, OCZ Guy
wrote: Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. That's very good. Barton's hate .5 multi. I don't have that board but have many NF2. Put everything to a setting rather than "auto". Lock RAM to 100% or 1/1 however it's listed. AGP lock at 66MHz. Turn off agp fastwrite. Sometimes the RAM and AGP want a little extra juice or cooling. Make small FSB increases over days to burn in the RAM. |
#3
|
|||
|
|||
Ive been running it at 2500 for a day now left it on when i went to work, ill try 13x210 my ram should do that easy. Ok ill do as you say master. On Thu, 22 Jul 2004 23:24:56 -0400, AJ wrote: On Fri, 23 Jul 2004 03:37:46 +1000, OCZ Guy wrote: Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. That's very good. Barton's hate .5 multi. I don't have that board but have many NF2. Put everything to a setting rather than "auto". Lock RAM to 100% or 1/1 however it's listed. AGP lock at 66MHz. Turn off agp fastwrite. Sometimes the RAM and AGP want a little extra juice or cooling. Make small FSB increases over days to burn in the RAM. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Any tips on getting a AMD mobile 2500 to maxium possible speed ? | OCZ Guy | Overclocking AMD Processors | 5 | July 24th 04 07:48 AM |
Any tips on getting a AMD mobile 2500 to maxium possible speed ? | OCZ Guy | Overclocking | 3 | July 23rd 04 08:39 PM |
Any tips on getting a AMD mobile 2500 to maxium possible speed ? | OCZ Guy | General | 0 | July 22nd 04 06:35 PM |
Mobile Barton 2500 whats the maxium multiplier it has ? | Paul Mathews | Overclocking AMD Processors | 3 | June 18th 04 04:53 AM |
Athlon XP 2100+ to mobile 2600+ worth the upgrage? | yuki | Overclocking AMD Processors | 15 | April 13th 04 02:21 PM |