.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
(Mike Richter, any Material Connection w/ Roxio?)

http://groups.google.com/groups?selm...mindspring.com
(Messages 10, 12 -- 34, 54 -- 69)

( No pipsqueaks have been able to prove ANY of the above is a libel )
( -- despite Mikey's supposed to have proof of misquotes! )

smh wrote:

ukaloo (Pipsqueak) spewed:

"Peter R" wrote...
What`s the reason for the apparent emnity between these two.Mike always
appears very helpful when a subject is raised.

smh has been at this for more than FOUR YEARS.
I was here at the beginning......such a long time ago......

Confirming Mike Richter (Lying Scum) has been making LIES and FRAUDS in
all those years!!!

===================================
Mike Richter & "Once is not enough"
===================================

==================================
From: Mike Richter (Slimy Scum)
Date: 10/26/01
Subject: Problem with Roxie CD to CD at 4x

I have a Teac CD516E burner and have no problems with it except
when I do a CD to CD copy. My reader is a Sony (48x).
EZCD copier sees my writer type and speed just fine until it
starts to copy then it drops to 4x. Not sure why.

Did the [system] test and came up with

Audio Extraction test: Speed is 7x

If I have a 48x reader shouldn't I get more out this drive?

... 6x is ... not unreasonable ...
==================================

[CDSpeed lists 28.7x for Sony(52x) and 17.9x for Sony(24x)]


===============================
Frauds by Mike Richter (2 of 2)
===============================

=====================
From: Mike Richter (Acraptec Shill)
Subject: too slow cd-rom for writing
Date: 1/23/00

I have a Comapq 4526, a Toshiba 40x and a cd-writer(Aopen crw9624. In easy
cd-creator there are a system-check. I run the system-check on my cd-rom
and it says that the cd-rom can't possibly read more than 0,9x on audio.
There was just the same problem with the old standard 24x. What's the
problem? Is it my computer or easy cd-creator.

Try using CD Speed or Exact Audio Copy (both linked from my CD-R site)
to determine how your reader performs in practice. Note that

1) Good results on a clean, pressed disc do not guarantee success on a
scratched disc or a CD-R copy

2) The manufacturer's rating on most readers is the most optimistic
value they can devise for data (not audio) at the optimum point on the
disc. What that becomes for audio in the real world is often
disappointing.
=====================

Despite the inquirer explicitly mentioned "0.9x", did Mikey say anything
about it being the Ezcd 4's bug? And this coming shortly after Adrian
Miller said on 1/12/00 that this is a well known "issue" that Adaptec is
very aware of. For Mikey to talk of the bug as if it's something new
that Mikey'd never heard of it before ---and as if there's no such a bug
---is a FRAUD !!!