Thread
:
Disk Management - New Partition option Greyed Out
View Single Post
#
4
March 23rd 05, 03:58 PM
Cyclops
external usenet poster
Posts: n/a
Hi Tapas and Rocky.
I had exactly the same problem and your solution worked a treat. Many
(160gb) thanks
Cyclops
Tapas Das Wrote:
"Rocket J. Squirrel"
wrote in message
s.com...-
Initialize the disk. Right click on Disk 1 (if that is the disk you
want-
to-
partition) and select Initialize. Now you can partition.
Rocky-
Thanks a million Rocky!!!
That was indeed the solution to my problem. Thanks for your speedy
response.
If any one is interested, I took notes of the entire process while
partitioning my new hard drive on my Dell Dimension 4600
WinXP Home PC.
I bought a Samsung SP1604N 160GB Hard Drive (Ultra ATA 133, 7200RPM)
and installed it as my Primary Slave HD.
Primary IDE Channel
-------------------
Primary Master HD = Western Digital WD800 80GB [C:]
Primary Slave HD = Samsung SP1604N 160GB
Secondary IDE Channel
---------------------
Secondary Master = CDROM Teac DVD+RW Model DV-58E [D:]
Secondary Slave = Empty
After the Samsung HD is installed and the computer is powered on, XP
detects
the new hardwa Samsung HD found.
Device Manger reports the new Hard Drive
| Start | Control Panel | System | Hardware | Device Manger | Disk
Drives |
SAMSUNG SP1604N
WDC WD800BB-75FJA1
System Information reports the new device
| Start | All Programs | Accessories | System Tools | System
Information |
Components | Storage | Disks
Manufacturer: Samsung SP1604N
Size: 149.05 GB (160,039,272,960 bytes)
Manufacturer: Western Digital
Model: WDC WD800BB-75FJA1
Size: 74.50 GB (79,999,073,280 bytes)
I wanted to partition my new 160 GB Hard Drive as follows:
E: 20 GB, NTFS, (For installing Programs)
F: 16 GB, FAT32 (For all data files)
G: 16 GB, FAT32 (For all data files - Mirror Image of F)
H: 108 GB, NTFS (For large video files)
I used Disk Management to Partition the new hard drive
| Start | Control Panel | Administrative Tools | Computer Management |
Storage |
Disk Management
Disc 0 Basic 74.50 GB This is your original Western Digital C: drive
Disc 1 Basic 149.05 GB Uninitialized! This is your new Hard Drive.
Right Click on Disk 1 to Initialize
Right Click on the Unallocated space (Black Bar) to display this menu:
New Partition
Properties
Help
Select New Partition
Welcome to the New Partition Wizard
-----------------------------------
This wizard helps you create a partition on a basic disk.
A basic disk is a physical disk that contains:
Primary partitions
Extended partitions
Logical drives within extended partitions
You can use any version of Windows or MS-DOS to gain access to
partitions on
basic discs.
[Next]
Select Partition Type
---------------------
There are 3 types of partitions:
Primary
Extended
Logical
Select the partition you want to create
Primary
Extended
Description: A primary partition is a volume you create using free
space on
a basic disk. Windows and other operating systems can start from a
primary
partition. You can create up to 4 Primary partitions or (3 Primary
partitions + 1 Extended partition)
An extended partition is a portion of a Master Boot Record (MBR) basic
disk
that can contain logical drives.
Use and Extended partition if you want to have more than 4 volumes on
your
MBR basic disk.
Select Extended
[Next]
Specify Partition Size
----------------------
Choose a partition size that is between the maximum and minimum sizes
Max disk space = 152625 MB
Min disk space = 8 MB
Partition size = 152625 MB
Select this default full size. You want to make the Extended partition
span
the whole disk.
[Next]
Completing the New Partition Wizard
----------------------------------
You have selected:
Partition Type: Extended partition
Disk selected: Disk 1
Partition size: 152625 MB
[Finish]
Now you see a green bar for Disk 1 showing 149.04 GB of Free Space
Right Click on the Green bar. You will see a drop down menu with 3
choices:
New Logical Drive
Delete Partition
Help
Select New Logical Drive
Welcome to the New Partition Wizard
-----------------------------------
[Next]
Select Partition Type
----------------------
Select the partition you want to create
Chose Logical Drive
Description: A Logical drive is a volume you create within an extended
partition on a Master Boot Record (MBR) basic disk.
[Next]
Specify Partition Size
----------------------
Max disk space = 152618 MB
Min disk space = 8 MB
Partition size = 21546
[Next]
Assign Drive Letter or Path
---------------------------
For easier access you can assign a drive letter or drive path to your
partition
Assign the following drive letter = E
[Next]
Format Partition
-----------------
To store data on this partition you must format it first
Choose whether you want to format this partition and if so what setting
you
want to use
Do not format this partition
* Format this partition with the following settings
File System = NTFS NTFS/FAT32
Allocation unit size = Default
(Choices are 512, 1024, 2048, 4096, 8192, 16K, 32k, 64k)
Volume Label: Programs
Perform a quick format = Yes
Enable file and folder compression = No
[Next]
Completing the New Partition Wizard
-----------------------------------
You have selected the following settings:
Partition type: Logical Drive
Disk selected: Disk 1
Partition size: 21546 MB
Drive letter: E:
File System: NTFS
Allocation unit size: Default
Volume label: Programs
Quick format: Yes
[Finish]
The newly created E: drive shows up in Blue
Screen says Formatting.
After a few minutes it reads:
Programs (E
21.04 GB NTFS
Healthy
Now you need to divide the remaining free space (128 GB) into 3
additional
Logical drives:
F = 16 GB Data FAT32
G = 16 GB Data2 FAT32
H = 96 GB Images NTFS
Right Click on the Green bar (Free Space on Disk 1)
Select New Logical Drive
[Next]
Select Partition Type
----------------------
Logical Drive
[Next]
Specify Partition Size
----------------------
Partition size = 15968 MB
Assign Drive Letter
Assign the following drive letter = F
[Next]
Format Partition
-----------------
Format this partition with the following settings
File System = FAT32
Allocation unit size = Default
Volume Label = Data1
Perform a quick format = Yes
[Next]
[Finish]
Wait for a few minutes while it is formatting.
When finished, the bar turns blue and the new Logical drive reads:
Data1 (F
15.6 GB FAT32
Healthy
Now you are ready to create Logical Drive G:
Right Click on the Green bar (Free Space on Disk 1)
Select New Logical Drive
[Next]
Select Partition Type
---------------------
Logical Drive
[Next]
Specify Partition Size
----------------------
Partition size = 15968 MB
Assign Drive Letter
Assign the following drive letter = G
[Next]
Format Partition
----------------
Format this partition with the following settings
File System = FAT32
Allocation unit size = Default
Volume Label = Data2
Perform a quick format = Yes
[Next]
[Finish]
Wait for a few minutes while it is formatting.
When finished, the bar turns blue and the new Logical drive reads:
Data2 (G
15.6 GB FAT32
Healthy
Finally, you are ready to make the remaining free space = Logical drive
H
Right Click on the Green bar (Free Space on Disk 1)
Select New Logical Drive
[Next]
Select Partition Type
Logical Drive
[Next]
Specify Partition Size
Maximum Disk space = 99128 MB
Minm disk space = 8 MB
Partition size = 99128 MB
Assign Drive Letter
Assign the following drive letter = H
[Next]
Format Partition
Format this partition with the following settings
File System = NTFS
Allocation unit size = Default
Volume Label = Images
Perform a quick format = Yes
Enable file and folder compression = No
[Next]
[Finish]
Wait for a few minutes while it is formatting.
When finished, the bar turns blue and the new Logical drive reads:
Data1 (H
96.80 GB NTFS
Healthy
Notes:
1. The Programs were installed on the second hard drive for faster
access.
This way the Master disk has the OS on Drive C: at the very outer edge
for
fastest access.
The Slave disk has the Programs installed on Logical Drive E: at the
very
outer edge for faster access.
2. Logical Drives F
Data1) and G
Data2) were formatted as FAT32 to
make
them readable across the network by the older Dell machines running
Win98SE
3. The Logical Drive H
Images) was formatted as NTFS to support the
large
video files (greater than 2GB)
Hope this information helps someone!
Best regards,
Tapas
--
Cyclops
Cyclops