Are you by any chance running Winfax Pro? I had a similar problem as
you and Winfax was the culprit. Got rid of the program and I got rid
of the problem.

CrucialOne

On Sun, 25 Jul 2004 19:00:06 -0500, David Maynard
wrote:

GTS wrote:

Yes I meant load the defaults and then set the CPU & memory to the correct
speed - it still means eveything else will be set to safe parameters - does
it still crash?
BTW most mobo's set the CPU to 100 or 133 by jumper on the mobo - is yours a
jumperless motherboard? Could you be 'overclocking' the frequency and making
the PCI/AGP bus run out of spec?

The K7S5A defaults to 100 MHz FSB in BIOS regardless of what processor is
there and you always have to manually set it to the proper FSB, unless
running a Duron.




"Radox" wrote in message
...

Listen GTS

My procesor's temprature is 45-49 C max 52 C and the resistance on a
Athlon XP is 85 C this menas thea is not a heat problem as in 1800 it
reaches the same temperatures.The lock-up ocurs at even 48 degrees C
so I don't know.
Secondly I tested my RAM and it works fine(so the program sais).
Olso I am using the coolet that came with the processor in the AMD
Box
Loading the defaults the Bios keeps me on 100/100 FSB not 133/133 as
it shoud.

==============
Posted through www.HowToFixComputers.com/bb - free access to hardware

troubleshooting newsgroups.