Mike Gorman and S. Heenan
Mike Gorman, my settings were already at 200x12 for 2400 with core
voltage at 1.675. The problem I was having was trying to get the OCZ
sticks up to thier rated 217x2 = 434Mhz. I can see what you mean
about the power supply. A few people have suggested I get a new one.
And, I know that upping the memory timings is not going to give me a
big performance increase, I'm just trying to push it. And I will
check out the site you suggested.
S. Heenan, I was able to up the fsb and decreased my multiplier to
218x11 = 2398 following your suggestion of changing the Memory
Frequency to 100% instead of SPD, and the AGP Frequency to 66MHz
instead of auto. Now, the Resulting Frequency is at 218 MHz, 218x2 =
436. This works, and I'm running stable. Can you guys explain what
changing the AGP Frequency to 66MHz does? How is this affecting the
aiw 9800 pro graphic card? I think I may be able to push the
multiplier more, but I'll wait until I get a better ps.
Last thing, can you guys suggest a power supply. There are too many
on the market right now, and the research will take days.
As it stands now, here are my new settings:
CPU External Freq......................................218MHz
Multiple Setting........................................... ..Menu
CPU Multiple.......................................... .......11.0
System Performance.................................User Defined
CPU Interface......................................... ......Optimal
Memory Frequency....................................100%
Resulting Frequency.................................218 MHz
Memory Timing...........................................U ser Defined
SDRAM Active Percentage Delay.......6
SDRAM RAS to CAS Delay...................3
SDRAM RAS Percentage Delay.........3
SDRAM CAS Lantency............................2T
CPU VCore Setting.................................Menu
CPU VCore ..............................................1.67 5V
AGP Frequency.......................................66 MHz
Chip Voltage Control.............................+1.6v
thanks for all your help.
On Fri, 18 Jul 2003 19:58:12 GMT, "S.Heenan"
wrote:
Guido wrote:
My system is:
a7n8x Deluxe V2.0 / Uber bios R1005 sata enhenced
Barton XP 3200+ @ 2400 (200x12) `Very Stable'
OCZ PC3500 EL Dual Channel DDR 2x256 set
Thermaltake VOLCANO 9
300 watts power supply. Plenty of case cooling.
Randon All-In-Wonder ATI 9800 Pro
WinXP Pro SP1
CPU temp runs constantly between 40c and 45c
CPU External Freq......................................200MHz
Multiple Setting........................................... ..Menu
CPU Multiple.......................................... .......12.0
System Performance.................................User Defined
CPU Interface......................................... ......Optimal
Memory Frequency....................................100% or Sync
Resulting Frequency.................................200 MHz
Memory Timing...........................................U ser Defined
SDRAM Active Percentage Delay.......6
SDRAM RAS to CAS Delay...................3
SDRAM RAS Percentage Delay.........3
SDRAM CAS Lantency..........................2T
FSB Spread Spectrum...........................Disabled
AGP Spread Spectrum..........................Disabled
CPU VCore Setting.................................Menu
CPU VCore ..............................................1.67 5V
Graphics Aperture Size.........................64mb
AGP Frequency.......................................66 MHz
System Bios Catchable........................Disabled
Video Ram Catchable..........................Disabled
Chip Voltage Control.............................+1.6v
AGP Fastwrite......................................... .Disabled
Try those settings and see if it's any better. Also, your power supply seems a bit underpowered.
|