did you get the replacement lcd?

"Louie" wrote in message
.. .
doS wrote:
yep.
close the laptop, remove the 3 screws on the back,at the base of the
lcd . then open the laptop, and carefully, near the right hand side,
remove the cover,the one that the 3 screws were in. use a plastic
knife or credit card, and gently pop off the little cover. (your
power buttons etc are on this cover).then, remove the little rubber
dots on the lcd trim, these are screw hole covers, put them somewhere
safe(i used a pill bottle)you will need these to plug the screw holes
back up.remove the screws now again use a credit card, remove the
bezel trim from the lcd .after that, you will see the invertor,
gently disco both ends of the lcd and the cable that aatches to the
base(it will be a little cable near where the acer logo was on the
cover you removed.)remove the screws on opposite ends of the
hinges.you'll also see 4 mounting screws that attach the lcd to the
laptop lid.when you remove the old lcd,hold it near the base,same
when replacing the new one.once you get the first few steps done, its
easy to see how it dissasembles.


"Louie" wrote in message
.. .
Does anyone know how or can point me in the right direction? Have to
replace LCD. Thanks!

Louie

Appreciate it! Exactly what I was hoping for! g Was going bonkers
trying
to find something on the Web.

Louie