January 10th 04, 12:56 AM
|
|
Did a quick check, here's one for a little cheaper but it looks cheap too
and out of stock.
http://www.pcbay.net/gen4porinrou.html
"Whelan" wrote in message
...
Sounds interesting. Just looked them up; the cheapest was $59. Since I
have
a desktop available, I'll try to live without printing for a while. But
thanks for the idea.
Nan
"Kevin Childers" wrote in message
...
You could always buy a stand alone print server device? Not the best
solution, but an option should all else fail.
KC
"Whelan" wrote in message
...
I tried to install the network printer several times but couldn't
because
of
that same problem -- not seeing the Dell computer it's attached to.
I wish there was some way to install the printer using just the IP
address
(which it can ping), bypassing name of computer it's attached to. I
tried
typing that in, but it just wouldn't take it.
I wonder if that's possible somehow?
(I have a 256mb usb drive, so the lack of file sharing will be only a
little
inconvenient.)
Nan
"tc" wrote in message
news:%TYKb.183831$ss5.132903@clgrps13...
Both names are listed because the Netgear router didn't update its
database
to remove the old name. The only problem with duplicate names
applies
to
you
having 2 or more computers on the same network with the same name.
If
you
look at the list of names on the router, you will be able to tell if
any
are
duplicated.
You can add a printer to an xp machine from Control Panel - Printers
and
other hardware. Assuming you have the printer attached to another
computer,
you would choose Network Printer. If the wizard can find it, it will
give
you the appropriate directions to add it to the Compaq. I have no
idea
whether this will work as you can't share files. But its worth a
try.
Terry
"Whelan" wrote in message
...
Yep, 'Obtain DNS Server address automatically' is checked
everywhere.
I've been reading the Belkin manual and I went to the router by
running
192.168.2.1 and found MAC addresses. And from some tips there
about
"adding
computer" I was able to get the compaq's wireless card to see the
router
and
it can connect to the internet. That added an additional IP
address
for
the
Compaq.
But both ways, the Compaq can only ping with the others by IP
addresses,
not
name. A microsoft troubleshooter said the computer name might be a
duplicate, so I changed it to PRESARIO. Now both names get listed
but
neither is accessible.
I'm very happy to have wireless internet access on the Compaq now.
I
can
probably share most files by a USB drive.
I just wish I could print!
Nan
"tc" wrote in message
news:3SNKb.182313$ss5.156707@clgrps13...
You did confirm that 'Obtain DNS Server address automatically'
was
checked,
didn't you?
Terry
"tc" wrote in message
news:aMNKb.182280$ss5.133591@clgrps13...
I don't think Simple File Sharing applies if you are running
Fat32.
Hmmm.
Terry
"Whelan" wrote in message
...
SEQUOIA is just the Workgroup name ... it's one of several
I've
tried.
But
it's always the same, the Compaq can't get beyond the
workgroup's
name.
I've started reading the articles you linked to ... I notice
references
to
NTFS file system.
I just realized that this Compaq uses FAT32 instead of NTFS.
Could
that
be
a
problem? (But then so does the 1998 Gateway laptop, and it
can
share
anything.) Both the Dells have NTFS on their C partition.
Nan
Back to those articles.
"tc" wrote in message
news:CPLKb.182130$ss5.178069@clgrps13...
What is SEQUOIA? Is this another computer on your network?
Terry
"Whelan" wrote in message
...
The File and Printer Sharing for Microsoft Networks box
is
checked
too.
Its
Install button offers the same 3 choices: Client,
Service,
and
Protocol.
The Compaq laptop's name is COMPAQ.
When I choose View Workgroup Computers from the Dells,
Compaq
appears
on
the
list, but when I click on it I get:
"\\Compaq is not accessible. You might not have
permission
to
use
this
network resource. Contact the administrator of the
server
to
find
out
if
you
have access permissions. The network path was not found.
"
When I choose View Workgroup Computers from the Compaq,
I
get
the
hourglass
for 20 seconds, then:
"SEQUOIA is not accessible. You might not have
permission
to
use
this
network resource. Contact the administrator of the
server
to
find
out
if
you
have access permissions. The list of servers for this
workgroup
is
not
currently available."
Hmm, the final sentence is different. I've changed the
workgroup
name
several times, but no result.
Nan
"Thagor" wrote in message
y.com...
Do you see "File/Print sharing in that group? If not,
install
it
and
put
a
check in the box. Then lets see what you have. Also
recheck
the
NAME
of
the
Laptop and make sure it is recognized properly.
"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the
router.
(Maybe
it's
in
the router manual.)
Re Optional Network Components,
I see something similar under Local Area Connection,
View
Status,
Properties. When highlighting either "Client for
Microsoft
Networks"
or
"Internet Protocol TCP/IP", there's a button you can
click
called
Install.
Clicking it gives you three choices: Client,
Service,
or
Protocol.
(I
saw
these Saturday but didn't think any of them
applied.)
Client lets you add Client Service for Netware.
Service
lets
you
add
Service
Advertising Protocol. Protocol lets you add
Microsoft
IPv6
Developer
Edition, Network Monitor Driver or NWLink
IPX/SPX/NetBIOS
Compatible
Transport Protocol.
Are any of those worth adding?
The computers appear the same in these settings.
Nan
"tc" wrote in message
news:96vKb.177743$ss5.51264@clgrps13...
The 'can't ping by name' sounds significant. You
haven't
got
2
computers
with the same name by any chance? Can your router
give
you
a
list
of
the
computers by name and ip address?
Terry
"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested
many
things
to
try.
The firewall is off.
I've standardized the login and workgroup names
(tried
3
different
workgroup
names actually, with many reboots).
I have connected to the router (at times): a
Dell
4500
desktop,
a
Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop
and
the
Presario
1800.
They
all have XPPro except the Gateway has 98se. They
can
all
see
each
others'
shared folders etc except the Compaq -- it can't
see
past
the
workgroup
name.
Angus told me how to "ping": They can ping each
other
by
name
and
IP
address, except the Compaq can only ping or be
pinged
by
IP
address.
The TCP/IP settings are the same on all (except
the
last
2
digits
of
the
addresses).
What are the "optional windows components? eg:
the
networks
add-ons"
that
Trai' mentions? Will I find them on the XP
installation
CD?
That might be worth a try!
Nan
"tc" wrote in message
news:MQpKb.44250$Dm.28247@edtnps89...
Also ensure the workgroup name is the same as
any
other
computer
on
your
home network.
Terry
"tc" wrote in message
news:xapKb.44234$Dm.26171@edtnps89...
It seems to me, if you can access the
internet,
you
should
be
able
to
access
your network. Assuming you are using a
router
and
the
other
machines
are
networking with tcp/ip, what would the
difference
be?
Check
to
make
sure
your XP firewall is turned off.
Terry
"Whelan" wrote in
message
...
I've just been handed down my son's Compaq
Presario
1800
laptop.
(I
bought
him a replacement.)
This Presario has never been able to tap
into
our
home
network
for
printing
or file sharing (since I installed Win
XPPro
on
it
summer
2002.
However
it
can use DSL through our router. This last
week
I
have
tried
furiously
to
solve the networking problem, with lots of
advice
on
the
Dell
message
boards, but nothing works.
It looks like I will have to reformat the
hard
drive
and
reinstall
Win
XPPro
to have any hope of networking it.
Has anyone made a fresh start on a a
Presario
1800
with
XP?
Was
it
difficult
to find drivers etc to make it work? I'm
not
finding
what
I
need,
so
far,
on
the web site; it only lists Win Me and
2000.
(We did purchase an extended warranty in
July
2001...
Any
chance
Compaq
would provide support of the type I need
by
phone?)
Nan
---
Checked by AVG anti-virus system
(http://www.grisoft.com).
Version: 6.0.558 / Virus Database: 350 - Release Date:
1/2/2004
---
Checked by AVG anti-virus system ( http://www.grisoft.com).
Version: 6.0.560 / Virus Database: 352 - Release Date: 1/8/2004
|