"p jayant" wrote in message
:
I have just now tried to print a document once again. The Printer
printed the Alignment Test Report but not the document I wanted to be
printed. Anyway, I placed the Alignment sheet on the Scanner and
pressed the Scan button and to make sure that the process was
registered, even saved the scan in My Scans Folder. Then I tried again
to print a document but still, the Printer does not wake up at all and
start printing.
Hmm... the user manual is available at
http://h10032.www1.hp.com/ctg/Manual/c00364973.pdf and the alignment
procedure is shown on page 32. Some things to check: make sure you are
using clean white paper and that the color cartridge is working properly
- both the black cartridge and the cyan portion of the color cartridge
must be working properly for the alignment to succeed.
You also might try forcing an alignment from the Image Zone software if
you have that installed on your system.
Regards,
Bob Headrick, MS MVP Printing/Imaging