View Single Post
  #8  
Old January 10th 06, 12:42 AM posted to alt.sys.pc-clone.compaq
external usenet poster
 
Posts: n/a
Default Compaq Deskpro EN 6266 & 1790

"Felix" wrote...

Nick Le Lievre ha usato la sua tastiera per scrivere :
Hi I had a working machine with a 3.2gb IDE hard drive


Hi, you have a DesktopPRO EN, with a PSU unit from compaq...

Please, could you post the order of the wire into its 24 pins??? And/or
a photo of the 24 pins molex in wich I see the color order of the wire?

I did a post someday ago... If you could read it you'll understand my
problem

Thank you!

P.S. Tomorrow I'll read your post... now I have to go to bed, sorry
P.P.S. sorry for my bad english


I found the PC yesterday when I went
to dump the trash. It had 128mb
SDRAM
16x/40x DVD Rom USR V.92 56k PCI &
17" LG CRT. The PC itself must date
back to
1998/99 and the memory, dvd &
monitor were manufactured in 2001
the modem I
think is circa 2004. Probably
upgraded then handed down to use as
an Internet
PC. The DVD Rom and Monitor are
going in my neices PC that's why I
removed the
DVD Rom - I never expected to lose
the HD parameters when it updated
configuration.

The PSU is Compaq PS2013 series p/n
334112-001 200w. I am charging my
digital
camera's batteries and will upload
some photos of the ATX connector to a webserver later.

Its 00:50 here I should be in bed! Gotta get round my nieces tommorow.