View Single Post
  #4  
Old June 16th 04, 07:52 AM
DougH
external usenet poster
 
Posts: n/a
Default

If it does that's fine. My only experience with upgrading a cpu that wasn't
specifically mentioned in the motherboard specs was back in the 486 days. I
replaced a 486 33MHz with an AMD 5x86 Pentium compatible and the system
wouldn't boot. I had to upgrade the bios chip itself for it to work. No
bios flashing at that time either.

DougH


"Ben Pope" wrote in message
...
DougH wrote:
As far as I can tell from LOTS of research is that the Mobo can

handle
100/133. I'm ASSUMING that it should be okay for an AMD 35 Watt Mobile
Athlon XP 2400+, at 266 MHz FSB. Or am I missing something?



Yes an Athlon XP 2400+ will run on that speed of bus. The question that
needs to be answered is will the bios on your Compaq recognize the

Athlon
XP?


Even if it doesn't, it should run it at the default multiplier and FSB.
Then all you're missing is the description on boot up...

Ben
--
A7N8X FAQ: www.ben.pope.name/a7n8x_faq.html
Questions by email will likely be ignored, please use the newsgroups.
I'm not just a number. To many, I'm known as a String...