View Single Post
  #12  
Old January 6th 04, 08:11 PM
tc
external usenet poster
 
Posts: n/a
Default

No, none of those are worth installing.
To access your router, go to start,run and type in its ip address like
http://192.168.1.1. The numbers will be the same as your computers ip
addresses except the last one will be 1. You may need a password; check the
manual.
Terry

"Whelan" wrote in message
...
You asked "Can your router give you a list of the
computers by name and ip address?"
I don't know how to look at or communicate with the router. (Maybe it's in
the router manual.)

Re Optional Network Components,
I see something similar under Local Area Connection, View Status,
Properties. When highlighting either "Client for Microsoft Networks" or
"Internet Protocol TCP/IP", there's a button you can click called Install.
Clicking it gives you three choices: Client, Service, or Protocol. (I saw
these Saturday but didn't think any of them applied.)
Client lets you add Client Service for Netware. Service lets you add

Service
Advertising Protocol. Protocol lets you add Microsoft IPv6 Developer
Edition, Network Monitor Driver or NWLink IPX/SPX/NetBIOS Compatible
Transport Protocol.
Are any of those worth adding?

The computers appear the same in these settings.
Nan

"tc" wrote in message
news:96vKb.177743$ss5.51264@clgrps13...
The 'can't ping by name' sounds significant. You haven't got 2 computers
with the same name by any chance? Can your router give you a list of the
computers by name and ip address?
Terry

"Whelan" wrote in message
...
Some helpful people, Angus for one, suggested many things to try.
The firewall is off.
I've standardized the login and workgroup names (tried 3 different

workgroup
names actually, with many reboots).

I have connected to the router (at times): a Dell 4500 desktop, a

Gateway
Solo 2500 (a 1998 model), a new Dell 8500 laptop and the Presario

1800.
They
all have XPPro except the Gateway has 98se. They can all see each

others'
shared folders etc except the Compaq -- it can't see past the

workgroup
name.

Angus told me how to "ping": They can ping each other by name and IP
address, except the Compaq can only ping or be pinged by IP address.

The TCP/IP settings are the same on all (except the last 2 digits of

the
addresses).

What are the "optional windows components? eg: the networks add-ons"

that
Trai' mentions? Will I find them on the XP installation CD?
That might be worth a try!
Nan

"tc" wrote in message
news:MQpKb.44250$Dm.28247@edtnps89...
Also ensure the workgroup name is the same as any other computer on

your
home network.
Terry

"tc" wrote in message
news:xapKb.44234$Dm.26171@edtnps89...
It seems to me, if you can access the internet, you should be able

to
access
your network. Assuming you are using a router and the other

machines
are
networking with tcp/ip, what would the difference be? Check to

make
sure
your XP firewall is turned off.
Terry

"Whelan" wrote in message
...
I've just been handed down my son's Compaq Presario 1800 laptop.

(I
bought
him a replacement.)

This Presario has never been able to tap into our home network

for
printing
or file sharing (since I installed Win XPPro on it summer 2002.
However
it
can use DSL through our router. This last week I have tried

furiously
to
solve the networking problem, with lots of advice on the Dell

message
boards, but nothing works.

It looks like I will have to reformat the hard drive and

reinstall
Win
XPPro
to have any hope of networking it.

Has anyone made a fresh start on a a Presario 1800 with XP? Was

it
difficult
to find drivers etc to make it work? I'm not finding what I

need,
so
far,
on
the web site; it only lists Win Me and 2000.

(We did purchase an extended warranty in July 2001... Any chance
Compaq
would provide support of the type I need by phone?)

Nan