On Sun, 08 Sep 2013 00:30:51 -0500, Tony wrote:
I assume there is a JetDirect card in the printer, if not you will need
to either add one or use a print server if you want to network the
printer over Ethernet.
I had never heard of a "JetDirect", but, clearly the printer has
an ethernet port as shown in this picture below:
http://i43.tinypic.com/1oosug.gif
Also, the test pages that printed show under "General Information"
1. HP JETDIRECT = J3110A
2. PORT SELECT = 10BASET
3. I/O CARD = READY
4. SNMP SET CMTY NAME = NONE
5. TCP/IP STATUS = READY