Hi everyone,
Some time ago I asked for some help on how to burn a 90 minute disc. I was
able to burn the disc, but ever since I created that disc, I am stuck with
the following error: could not perform fixation. The writer is a Plextor
CD-R, PX-320a, and I am using Nero Burning Rom (5.5.10.56).
When I try to burn a CD-R, everything goes well right until the end when the
verification process starts, then it fails with the aforementioned error.
Besides this error, anoter is displayed: logical unit not ready, operation
in progress.
The first time it occured, I thought it was because I was watching TV with
my Hauppage TV card (which has given me troubles in the past), but now the
error keeps occuring.
The resulting disc seem to turn out fine: all files expected to be on the
disc are there, can be copied and verify correctly (CRC check with other
tools).
How can I fix this error? I already changed the expert features to disable
the overburn length (in short the tips given in
http://www.ormsby.ca/spazmogen/) but that did not seem to do it.
Thanks in advance for your time and trouble,
Princess Morgiah
PS: Here is the log that I have saved via Nero:
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 21:37:36
Nero Version: 5.5.10.56
Recorder: PLEXTOR CD-R PX-320A Version: 1.01 - HA 1 TA 0 -
5.5.10.56
Adapter driver: atapi HA 1
Drive buffer : 2048kB
Bus Type : default (0) - ATAPI, detected: ATAPI
CD-ROM: PLEXTOR CD-R PX-320A Version: 1.01 - HA 1 TA 0 -
5.5.10.56
Adapter driver: atapi HA 1
Bus Type : default (0) - ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0
DMA: On
DiskPeripheral : IC35L040AVER07-0 atapi Port 0 ID 1
DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-320A atapi Port 1 ID 0
DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523740kB)
Free physical memory: 164MB (168948kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
25.6.2004
CD-ROM (ISO)
23:09:03 #1 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
23:09:04 #2 Phase 72 File dlgbrnst.cpp, Line 1655
BURN-Proof activated
23:09:04 #3 Text 0 File Reader.cpp, Line 115
Reader running
23:09:04 #4 Text 0 File Writer.cpp, Line 125
Writer PLEXTOR CD-R PX-320A running
23:09:04 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
23:09:04 #6 Text 0 File Burncd.cpp, Line 3773
Turn on Track-At-Once, using CD-R/RW media
23:09:04 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 193343 (193343) = #193343/42:57.68
relocatable, CD pos for caching/writing not required/required, no patch
infos
--------------------------------------------------------------
23:09:04 #8 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 193342 (42:59.67)
23:09:04 #9 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE
23:09:04 #10 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: PLEXTOR CD-R PX-320A;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B
46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3:
00 00 00 (invalid)
23:09:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PLEXTOR CD-R PX-320A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 396273664
23:09:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
23:09:04 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 193343 (193343) = #193343/42:57.68
relocatable, CD pos for caching/writing not required/required, no patch
infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
193341 blocks [PLEXTOR CD-R PX-320A ]
--------------------------------------------------------------
23:09:04 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
23:09:16 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
23:09:16 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 1x (150 KB/s)
23:09:16 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig
at #0): write at #0
23:09:16 #18 Text 0 File Mmc.cpp, Line 19546
Set BUFE: BURN-Proof - ON
23:52:32 #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
23:52:42 #20 Text 0 File Mmc.cpp, Line 14537
PLEXTOR CD-R PX-320A start Close Session
23:56:42 #21 SCSI -1169 File Cdrdrv.cpp, Line 1243
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
23:56:42 #22 MMC -1169 File ThreadedTransferInterface.cpp, Line 994
Logical unit not ready, operation in progress
23:56:42 #23 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 994
Could not perform Fixation
23:57:02 #24 Text 0 File Mmc.cpp, Line 14537
PLEXTOR CD-R PX-320A start Close Session
23:57:02 #25 SCSI -1026 File Cdrdrv.cpp, Line 1243
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x04
23:57:02 #26 MMC -1026 File ThreadedTransferInterface.cpp, Line 994
Current program area empty
23:57:02 #27 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 994
Could not perform Fixation
23:57:02 #28 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 1x (150 KB/s)
23:57:02 #29 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.00.2195.5376, size=86704 bytes, created
22/07/2002 12:05:04 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)