View Single Post
  #3  
Old August 10th 03, 09:52 PM
Proto
external usenet poster
 
Posts: n/a
Default


"Robert Hancock" wrote in message
. ca...
Likely either the disc is very incompatible with the drive, or the drive

is
bad (quite likely a weak laser), though it's possible it could be due to
dust in the drive (you could try blowing it out with compressed air). The
error message means that the drive exhausted all of the PCA (Power
Calibration Area) on the disc without finding an appropriate laser power
setting for the disc.

--

Thanks gents. I guess the drive is finally dead. It's about time I guess.