View Single Post
  #2  
Old August 6th 17, 04:10 PM posted to alt.comp.periphs.mainboard.asus
Paul[_28_]
external usenet poster
 
Posts: 1,467
Default Boot by spacebar stopped working

Bill Anderson wrote:
Here's a puzzler for you. I have an Asus P9X79 system which I've been
using happily for almost five years now. The other day I pressed the
spacebar to start the system, and nothing happened. That's weird -- I
always boot by pressing the spacebar, but pressing the button on the
case started the system, and I went merrily on my way not giving the
problem much thought.

But the next time I tried to boot, the same thing happened, so I checked
BIOS and found the boot by spacebar option was disabled. Well that was
weird, as I hadn't been into BIOS in months. So I enabled the option
and shut down and then pressed the spacebar -- and nothing happened.

Now I did recall that a day earlier my (USB) keyboard wasn't working and
when I checked I found I'd dislodged the USB to PS/2 adapter plugged
into the MBO. So I pushed the adapter back into place and the keyboard
started working again (after a reboot) and I was in business. But now
I'm thinking maybe this was the start of my spacebar boot problem? Could
this be what disabled the option in BIOS? I dunno.

All I know is that now for some reason I can't boot from the keyboard.
Even changing from the spacebar option in BIOS to the Ctrl/Esc option
makes no difference. Suddenly after all these years, how is is it that
I can't boot from the keyboard? I know the keyboard is getting power
from the MBO even in the shut-down state, as I can unplug the keyboard
while shut down, and when I plug it back in the lights on it flash. But
it won't boot the computer.

Maybe I need a new MBO battery? The clock is giving me no problems.
Other ideas anyone? Help?


The BIOS setting is for APM, a subsystem your current
OS is not using. My APM section is all switched off.

When the OS is booted, go to Device Manager, find the HID
device that you want to be starting the computer, do Properties,
and one of the tabs on there says

"Allow this device to wake the Computer"

That's the tick box you want to enable. AFAIK.

The motherboard will be using +5VSB to run the USB
ports, and that's the power source that makes waking
possible. These motherboards don't have the old PWR header
plug, to select between +5V (no wake) and +5VSB (wake).
They're permanently powered with the +5VSB option
for waking.

You will also want to check the Device Manager mouse
settings. I have one mouse, which when "sleeping", does not
turn on the LED under any circumstances. It's only wake
input is mouse click. You need to enable that mouse
in the Device Manager, then a mouse click works. For
my newer Microsoft mouse, the blue LED in that flashes
for as long as it has +5VSB, and both mouse movement
and button clicks work. I keep that one turned off
in the Device Manager, so bumping it doesn't
result in a false positive.

I think my keyboard is on the combo PS/2 and waking
there works off any key.

There were motherboards, where the SuperI/O chip had
a "filter" on the PS/2 keyboard port. And in the BIOS,
you could set detection to four different keyboard
key press sequences. The P9X79, I don't see an option for
that, and as it's in the APM section, there probably isn't
a reason for the OS to look there. Use Device Manager
instead and see what is there.

Paul