Ah.

If I understand the process correctly, Lines 1&2 are a DIFFERENT message
than the remaining lines and are UNRELATED to your 2940.

PXE is the process to boot your machine from a LAN image of the OS. It
sounds like your LAN card supports it, but doesn't have the PXE BIOS
installed. Not uncommon. Go into the BIOS and look around for boot options.
Make sure LAN is not in the order.

Let us know if that works.

Tom
"Alan Kerr" wrote in message
...
Initializing Intel Boot Agent Version 4.1.08
PXE 2.1 Build 083 (WfM 2.0) RPL V2.74
Adaptec AHA-2940 BIOS V1.16
(c) 1995 Adaptec, Inc, All Rights Reserved
Press CtrlA for SCSI Select (Tm) Utility
BIOS not installed


F1 Boot

------------------------------------------------------------------------


Tom that's most the screen g any help appreciated

Alan

Tom Scales wrote:
What's the error message that is making it stall?
"Alan Kerr" wrote in message
...

I fitted a 2940 SCSI card to my W4000. Adaptec haven't written a driver
for XP to support the 2940 but it works fine with the XP driver. The
problem is when I boot up it stalls and I have to hit F1 for it to
finish booting up. Does anyone know how I can fix this problem

Thanks
Alan