I had a similar problem on 2 drives at once. Windows did no recognize the
drives anymore. I used EZ Recovery Pro and it worked great. It got the
data back intact in total!
"Zvi Netiv" wrote in message
...
Zvi Netiv wrote:
(Jethro) wrote:
First of all, I don't know if I am in the right group here, someone
else pointed me in this direction.
I have a problem with one of my harddrives which I will try to explain
he
I have 2 harddrives in my pc 1 is the system harddrive on which my OS
(win2k) is installed. The second one is a harddrive for all my other
things, the size is 80Gb. That harddrive containt 4 partitions of
somewhere arround 20Gb each. This second harddrive is the problem.
Something went terribly wrong during a crash and now Windows says the
drive is 'unformatted'. The partitions are no longer viewable.
In the bios the size of the harddrive isn't correct. The actual size
is 80Gb but the bios says somewhere arround 31Gb.
With EasyRecovery Pro I managed to get a little more information which
have shown that, from the 31Gb, 1 partition (of 20Gb) is still intact
and I am able to recover all the data on that partition. The rest of
the space is 'unindentified'.
I also have a logfile of partition magic, you can view it he
http://www.xs4all.nl/~bjborsje/diskinfo.txt.
My feeling is that all the data is on the harddrive, but that somehow
the partition tables are messed up. I hope there is a way to make this
all work again.
The problem lies he
================================================== =====================
Partition Information for Disk 2: 32,247.7 Megabytes
Volume PartType Status Size MB PartSect #
StartSect TotalSects
================================================== =====================
Type 42 Pri 32,247.7 0 0
0 66,043,215
Seems that the drive not being recognized as 80 GB is caused by the bad
partition table in the MBR and the drive setting in the setup being on
AUTO.
You could try the following procedu
Download RESQ from http://resq.co.il/resq.php and prepare the rescue
floppy by
running the download file on a PC that runs under Win98. If you have no
access
to such PC then prepare the FreeDOS boot floppy from our site by aid of
MakeResQ, from http://resq.co.il/resq.php
Sorry, bad link: should be http://http://resq.co.il/iv_tools.php
Boot the problem PC from the floppy made, then from the A: prompt and
the RESQ
floppy, run RESQDISK /KILL /2
This will put zeros in the partition table of the second drive without
affecting
anything else. Reboot the PC from the floppy and see if the BIOS now
detects
the drive with the correct size.
From the A: drive, run now RESQDISK /ASSESS /2
RESQDISK will scan the second drive for partitions and configuration
data and
will prepare a report named A:\RESQDISK.RPT (leave the floppy write
enabled to
save the report). Post the report here (it's a plain text file) and I
should be
able to instruct how to complete the recovery.
Regards, Zvi
--
NetZ Computing Ltd. ISRAEL http://invircible.com
InVircible Virus Defense Solutions, ResQ and Data Recovery Utilities
E-mail sent in reply to this post will not be considered private and
will be answered in the newsgroup. Top posting is not appreciated!