View Single Post
  #5  
Old March 12th 17, 05:21 PM posted to alt.comp.hardware.pc-homebuilt
Mr. Man-wai Chang
external usenet poster
 
Posts: 697
Default Would UEFI with CSM enable cause power problem to Intelmotherboards?

On 13/03/2017 12:02 AM, Paul wrote:

1) Verify the PCI or PCI Express cards fit properly.
Plug a test card into Slot 1 and Slot 6 and check
for binding, or for the plugin card being bent or torqued
on insertion into its motherboard socket. You want
the cards to fit smoothly and not be under stress.
I had one computer case, where the alignment was
terrible!

2) The screws for the standoffs are generally dead center.
The position of the motherboard should not be allowed to
drift too far from dead center. Each screw thread in the
standoff, should be nicely centered in the mounting holes.
When you install a motherboard, you have to hold the
motherboard in place with one hand, while tightening the
screws with the other hand. The spring fingers near the
I/O plate area, tend to push the motherboard out of position.


If it's metal contact and short-circuit issues, the problem should have
happened days ago. It's really weird as the problem suddenly surfaced
just yesterday night.

I would try to reproduce the problem later.

--
@~@ Remain silent! Drink, Blink, Stretch! Live long and prosper!!
/ v \ Simplicity is Beauty!
/( _ )\ May the Force and farces be with you!
^ ^ (x86_64 Ubuntu 9.10) Linux 2.6.39.3
不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA):
http://www.swd.gov.hk/tc/index/site_...sub_addressesa