View Single Post
  #46  
Old August 15th 18, 08:04 PM posted to alt.comp.hardware.pc-homebuilt,comp.sys.ibm.pc.hardware.storage
Lynn McGuire[_3_]
external usenet poster
 
Posts: 198
Default "Why I Will Never Buy a Hard Drive Again"

On 8/14/2018 8:55 PM, mike wrote:
On 8/14/2018 3:24 PM, Mark Perkins wrote:
On Tue, 14 Aug 2018 13:58:00 -0500, Lynn McGuire
wrote:

On 8/12/2018 12:58 AM, Mark Perkins wrote:
On Wed, 8 Aug 2018 20:37:01 -0500, Lynn McGuire

wrote:

"Why I Will Never Buy a Hard Drive Again"

https://www.tomshardware.com/news/ch...ves,37563.html


"It’s been years since I was willing to work on any PC that boots
from a
mechanical hard drive. Once you get used to the snappy response times
and speedier gameload times of an SSD, going back to a hard drive
feels
like computing through a thick layer of molasses."

Lynn

If you were buying a 'large' drive now, what would you buy? SMR seems
like something to be avoided, so if I want a drive in the 8-10-12+
range, what's available?

Not just asking Lynn, anyone can chime in.

I buy 8 TB WD externals for backups drives for our LAN.* We have three
spinning and seven externals.* I replace one external drive every six
months and archive the old one.* It may be time to jump to the 10 TB,
our LAN backup is now 4 TB.

https://www.amazon.com/Book-Desktop-...dp/B01LQQHLGC/


Your situation is obviously business-related while my situation is just
a home LAN with a handful of PCs, three of which I actually care about,
so the part about archiving a drive every six months and replacing it
wouldn't apply, but the rest is very helpful.

I see the 8TB on Amazon for $160 ($20/GB) and the 10TB for $270
($27/GB), both of which are pretty darn amazing. The higher per-GB price
of the 10TB is offset by the fact that fewer drives are needed, if
USB/SATA ports or desktop/bay space are a limiting factor.

In my case, if I were to buy external drives, I would open the cases and
strip the drives out to mount them internally. I don't have much use for
external drives, but I know they're popular with others.

Make sure you know what you're getting.
I bought a 2.5" external USB drive.
Took it apart to discover that the USB is on the drive controller
board and there's no option to use it otherwise.
No idea if this happens with 3.5".


I stripped the 8 TB out of an external WD drive to replace the internal
4 TB backup drive on my office pc. The USB is on a daughterboard so no
big deal. I've done the stripping before.

However, my office pc will not address the 8 TB internal drive. It will
address the 4 TB internal drive though. So, my conclusion is that my 5
year old Gigabyte Z68XP motherboard cannot address the 8 TB drive. I
bought a SATA board to see if it can address the drive but have yet to
try it out.

Lynn