Quick Poll - 40mm - 60mm - 80mm - 92mm Fan on your Heatsink?
 

Subject header says it all. . .

I use a 40mm Fan, its part of the retail FC-PGA PIII heatsink running a 550e
@ 733Mhz - Load 41c - I'm in the UK. . .

"Wayne Youngman" wrote in message
...
Subject header says it all. . .

I use a 40mm Fan, its part of the retail FC-PGA PIII heatsink running a
550e
@ 733Mhz - Load 41c - I'm in the UK. . .



80mm with 86cm adapter on Copper Sink. XP2000+ Palimino Load/Idle at ~42

80mm Panaflo M1BX on Thermalright AX-478

92mm is the way to go if your heatsink is big enough. 60cfm at 35db for the
38mm thick fans is superb performance.

rms

Epox 8RDA3+ 227 FSB Northbridge : Slim Volcano + 80mm =19CFM

XP1700 DUT3C 10.0 - 2270 MHz : Volcano 9 + 80mm = 75CFM

Gigabyte Radeon 9700 Pro - 393/371 : Slim Volcano + 92mm = 52CFM

Maxtor DM 9 - 92mm = 52CFM

Vantec 4-channel Fan Control

Air - 41/55C



"Wayne Youngman" wrote in message
...
Subject header says it all. . .

I use a 40mm Fan, its part of the retail FC-PGA PIII heatsink running a
550e
@ 733Mhz - Load 41c - I'm in the UK. . .

"Wayne Youngman" wrote in
:

Subject header says it all. . .

I use a 40mm Fan, its part of the retail FC-PGA PIII heatsink running
a 550e @ 733Mhz - Load 41c - I'm in the UK. . .



60mm delta screamer (the infamous "black label" delta) on an OCZ gladiator
(all copper thin fin HS)

1300 duron, at 1300 runs low high 30's to low 40's idle, and like mid 40s
to low 50s at full load.

92mm Papst fan on Alpha PAL8045 heatsink with selfmade adaptor.

"Ed Light" wrote in message
...
Original 70mm on Thermal Integration TI-V77L with a Zalman FanMate speed
controller turned all the way down, giving 2700 rpm from 5000 rpm.

Since people are giving their temp.:

XP 2000+, not overclocked
At 5000 rpm 31c idle
at 2700 rpm 42c idle


--
Ed Light

Smiley :-/
MS Smiley :-\

Wayne Youngman wrote:
Subject header says it all. . .

I use a 40mm Fan, its part of the retail FC-PGA PIII heatsink running
a 550e @ 733Mhz - Load 41c - I'm in the UK. . .

80 mm on SLK-800 and 80 mm on a volcano 9.
60 mm on 6 stock AMD sinks.
60 mm on a stock PIII 1bGhz cooler
40 mm on 4 AT machines.

"Wayne Youngman" wrote in message
...
Subject header says it all. . .

I use a 40mm Fan, its part of the retail FC-PGA PIII heatsink running a
550e
@ 733Mhz - Load 41c - I'm in the UK. . .


70mm fan sitting at 90% to the HS in a Coolermaster Aero 7+ on my XP 2800+
Barton - runs at around 44 deg C idle, 49/50deg C load.

--
Sparky