HardwareBanter

HardwareBanter (http://www.hardwarebanter.com/index.php)
-   Homebuilt PC's (http://www.hardwarebanter.com/forumdisplay.php?f=36)
-   -   Graphics card question (http://www.hardwarebanter.com/showthread.php?t=20974)

ewgf August 25th 04 06:21 PM

Graphics card question
 
Today I upgraded a mate's graphics card for him, and he gave me his old one,
a Radeon 9200SE (according to My Computer). Is this a good card? Anyway,
I've swapped it for my Ge-Force 4 MX, but I have a slight problem; whenever
I reset (or boot up) the PC, the monitor (ordinary 17" CRT model) switches
itself off, as though to protect itself from an invalid setting or whatever,
and I have to manually swith the monitor off and on to get a picture.

How can I cure this? By the way, I've installed the latest ATI driver from
PC Zone's June DVD ROM (the latest issues I have). And which card is better,
the Radeon 9200SE or the Ge-Force 4 MX?

Thanks for any answers.



JAD August 25th 04 06:30 PM

first that is a 'pretty' good card, When installing graphic cards you
have to rid all drivers and software from the prior card. If you don't
your going to have major problems.


"ewgf" wrote in message
...
Today I upgraded a mate's graphics card for him, and he gave me his

old one,
a Radeon 9200SE (according to My Computer). Is this a good card?

Anyway,
I've swapped it for my Ge-Force 4 MX, but I have a slight problem;

whenever
I reset (or boot up) the PC, the monitor (ordinary 17" CRT model)

switches
itself off, as though to protect itself from an invalid setting or

whatever,
and I have to manually swith the monitor off and on to get a

picture.

How can I cure this? By the way, I've installed the latest ATI

driver from
PC Zone's June DVD ROM (the latest issues I have). And which card is

better,
the Radeon 9200SE or the Ge-Force 4 MX?

Thanks for any answers.





ewgf August 25th 04 08:13 PM

I did remove the GF drivers prior to the install. Thanks for the
suggestion though.

"JAD" wrote in message
...
first that is a 'pretty' good card, When installing graphic cards you
have to rid all drivers and software from the prior card. If you don't
your going to have major problems.


"ewgf" wrote in message
...
Today I upgraded a mate's graphics card for him, and he gave me his

old one,
a Radeon 9200SE (according to My Computer). Is this a good card?

Anyway,
I've swapped it for my Ge-Force 4 MX, but I have a slight problem;

whenever
I reset (or boot up) the PC, the monitor (ordinary 17" CRT model)

switches
itself off, as though to protect itself from an invalid setting or

whatever,
and I have to manually swith the monitor off and on to get a

picture.

How can I cure this? By the way, I've installed the latest ATI

driver from
PC Zone's June DVD ROM (the latest issues I have). And which card is

better,
the Radeon 9200SE or the Ge-Force 4 MX?

Thanks for any answers.







JAD August 25th 04 08:41 PM

did you use the 'driver' uninstaller that is on the nvidia site?
did you go into safe mode and check to make sure there are no entries
in the display adapters category?
did you then revert back to 'standard VGA adapter" for the primary
display adapter before installing the ATI?


"ewgf" wrote in message
...
I did remove the GF drivers prior to the install. Thanks for the
suggestion though.

"JAD" wrote in message
...
first that is a 'pretty' good card, When installing graphic cards

you
have to rid all drivers and software from the prior card. If you

don't
your going to have major problems.


"ewgf" wrote in message
...
Today I upgraded a mate's graphics card for him, and he gave me

his
old one,
a Radeon 9200SE (according to My Computer). Is this a good card?

Anyway,
I've swapped it for my Ge-Force 4 MX, but I have a slight

problem;
whenever
I reset (or boot up) the PC, the monitor (ordinary 17" CRT

model)
switches
itself off, as though to protect itself from an invalid setting

or
whatever,
and I have to manually swith the monitor off and on to get a

picture.

How can I cure this? By the way, I've installed the latest ATI

driver from
PC Zone's June DVD ROM (the latest issues I have). And which

card is
better,
the Radeon 9200SE or the Ge-Force 4 MX?

Thanks for any answers.









Dave C. August 25th 04 09:49 PM


"ewgf" wrote in message
...
Today I upgraded a mate's graphics card for him, and he gave me his old

one,
a Radeon 9200SE (according to My Computer). Is this a good card? Anyway,
I've swapped it for my Ge-Force 4 MX, but I have a slight problem;

whenever
I reset (or boot up) the PC, the monitor (ordinary 17" CRT model) switches
itself off, as though to protect itself from an invalid setting or

whatever,
and I have to manually swith the monitor off and on to get a picture.


Check your refresh rate, and turn it down to 75 or lower. Most new graphic
cards will temporarily force you back to a standard monitor with a low
resolution and refresh rate. It's possible the opposite has happened here.
Make sure your monitor is properly recognized by specific model number in
windows. -Dave



Shepİ August 26th 04 12:21 AM

On Wed, 25 Aug 2004 18:21:56 +0100 To confuse Arrogance with
Confidence is as stupid as to confuse Ambition with Ability and then
"ewgf" wrote :

Today I upgraded a mate's graphics card for him, and he gave me his old one,
a Radeon 9200SE (according to My Computer). Is this a good card? Anyway,
I've swapped it for my Ge-Force 4 MX, but I have a slight problem; whenever
I reset (or boot up) the PC, the monitor (ordinary 17" CRT model) switches
itself off, as though to protect itself from an invalid setting or whatever,
and I have to manually swith the monitor off and on to get a picture.

How can I cure this? By the way, I've installed the latest ATI driver from
PC Zone's June DVD ROM (the latest issues I have). And which card is better,
the Radeon 9200SE or the Ge-Force 4 MX?

Thanks for any answers.


They are a good card but ATI suck on drivers.




--
Free Windows/PC help,
http://www.geocities.com/sheppola/trouble.html
remove obvious to reply
email
Free songs to download and,"BURN" :O)
http://www.soundclick.com/bands/8/nomessiahsmusic.htm

Mac Cool August 26th 04 04:19 AM

"ewgf" said:

which card is better,
the Radeon 9200SE or the Ge-Force 4 MX?


The 9200SE by a nose hair.
--
Mac Cool

ewgf August 28th 04 11:59 AM

did you use the 'driver' uninstaller that is on the nvidia site?

No, where can I download this from?

did you go into safe mode and check to make sure there are no entries
in the display adapters category?


Again, no.

did you then revert back to 'standard VGA adapter" for the primary
display adapter before installing the ATI?


It did this automatically, I think, I could be wrong...


"ewgf" wrote in message
...
I did remove the GF drivers prior to the install. Thanks for the
suggestion though.

"JAD" wrote in message
...
first that is a 'pretty' good card, When installing graphic cards

you
have to rid all drivers and software from the prior card. If you

don't
your going to have major problems.


"ewgf" wrote in message
...
Today I upgraded a mate's graphics card for him, and he gave me

his
old one,
a Radeon 9200SE (according to My Computer). Is this a good card?
Anyway,
I've swapped it for my Ge-Force 4 MX, but I have a slight

problem;
whenever
I reset (or boot up) the PC, the monitor (ordinary 17" CRT

model)
switches
itself off, as though to protect itself from an invalid setting

or
whatever,
and I have to manually swith the monitor off and on to get a
picture.

How can I cure this? By the way, I've installed the latest ATI
driver from
PC Zone's June DVD ROM (the latest issues I have). And which

card is
better,
the Radeon 9200SE or the Ge-Force 4 MX?

Thanks for any answers.











ewgf August 28th 04 12:01 PM


"Mac Cool" wrote in message
...
"ewgf" said:

which card is better,
the Radeon 9200SE or the Ge-Force 4 MX?


The 9200SE by a nose hair.
--
Mac Cool


I benchmarked them with two programs (31 Mark 2001 and GL Excess) and the
ATI came out around
15% to 25% faster each time. As you imply, it's almost nothing in real
terms, considering the ATI is
newer and has twice the RAM.



Mac Cool August 28th 04 04:44 PM

"ewgf" said:

I benchmarked them with two programs (31 Mark 2001 and GL Excess) and
the ATI came out around 15% to 25% faster each time.


Very good, looks like I underestimated the 9200se.
--
Mac Cool


All times are GMT +1. The time now is 03:32 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com