Opening Aspire 3610
 

Does anyone know how or can point me in the right direction? Have to
replace LCD. Thanks!

Louie

Opening Aspire 3610
 

yep.
close the laptop, remove the 3 screws on the back,at the base of the lcd .
then open the laptop, and carefully, near the right hand side, remove the
cover,the one that the 3 screws were in. use a plastic knife or credit card,
and gently pop off the little cover. (your power buttons etc are on this
cover).then, remove the little rubber dots on the lcd trim, these are screw
hole covers, put them somewhere safe(i used a pill bottle)you will need
these to plug the screw holes back up.remove the screws now again use a
credit card, remove the bezel trim from the lcd .after that, you will see
the invertor, gently disco both ends of the lcd and the cable that aatches
to the base(it will be a little cable near where the acer logo was on the
cover you removed.)remove the screws on opposite ends of the hinges.you'll
also see 4 mounting screws that attach the lcd to the laptop lid.when you
remove the old lcd,hold it near the base,same when replacing the new
one.once you get the first few steps done, its easy to see how it
dissasembles.


"Louie" wrote in message
.. .
Does anyone know how or can point me in the right direction? Have to
replace LCD. Thanks!

Louie

Opening Aspire 3610
 

doS wrote:
yep.
close the laptop, remove the 3 screws on the back,at the base of the
lcd . then open the laptop, and carefully, near the right hand side,
remove the cover,the one that the 3 screws were in. use a plastic
knife or credit card, and gently pop off the little cover. (your
power buttons etc are on this cover).then, remove the little rubber
dots on the lcd trim, these are screw hole covers, put them somewhere
safe(i used a pill bottle)you will need these to plug the screw holes
back up.remove the screws now again use a credit card, remove the
bezel trim from the lcd .after that, you will see the invertor,
gently disco both ends of the lcd and the cable that aatches to the
base(it will be a little cable near where the acer logo was on the
cover you removed.)remove the screws on opposite ends of the
hinges.you'll also see 4 mounting screws that attach the lcd to the
laptop lid.when you remove the old lcd,hold it near the base,same
when replacing the new one.once you get the first few steps done, its
easy to see how it dissasembles.


"Louie" wrote in message
.. .
Does anyone know how or can point me in the right direction? Have to
replace LCD. Thanks!

Louie

Appreciate it! Exactly what I was hoping for! g Was going bonkers trying
to find something on the Web.

Louie

Opening Aspire 3610
 

did you get the replacement lcd?

"Louie" wrote in message
.. .
doS wrote:
yep.
close the laptop, remove the 3 screws on the back,at the base of the
lcd . then open the laptop, and carefully, near the right hand side,
remove the cover,the one that the 3 screws were in. use a plastic
knife or credit card, and gently pop off the little cover. (your
power buttons etc are on this cover).then, remove the little rubber
dots on the lcd trim, these are screw hole covers, put them somewhere
safe(i used a pill bottle)you will need these to plug the screw holes
back up.remove the screws now again use a credit card, remove the
bezel trim from the lcd .after that, you will see the invertor,
gently disco both ends of the lcd and the cable that aatches to the
base(it will be a little cable near where the acer logo was on the
cover you removed.)remove the screws on opposite ends of the
hinges.you'll also see 4 mounting screws that attach the lcd to the
laptop lid.when you remove the old lcd,hold it near the base,same
when replacing the new one.once you get the first few steps done, its
easy to see how it dissasembles.


"Louie" wrote in message
.. .
Does anyone know how or can point me in the right direction? Have to
replace LCD. Thanks!

Louie

Appreciate it! Exactly what I was hoping for! g Was going bonkers
trying
to find something on the Web.

Louie

Opening Aspire 3610
 

doS wrote:
did you get the replacement lcd?
snip

It's in transit.

Opening Aspire 3610
 

expensive?
just curious.

"Louie" wrote in message
.. .
doS wrote:
did you get the replacement lcd?
snip

It's in transit.

Opening Aspire 3610
 

doS wrote:
expensive?
just curious.

"Louie" wrote in message
.. .
doS wrote:
did you get the replacement lcd?
snip

It's in transit.

Not really. Found it in surplus. About $100US plus $30US for shipping.
Seller says it works, we'll see. g

Opening Aspire 3610
 

wish I had known, I just sold one on ebay for 53.00 USD
you can email me if you need more help, be glad to assist you.

"Louie" wrote in message
.. .
doS wrote:
expensive?
just curious.

"Louie" wrote in message
.. .
doS wrote:
did you get the replacement lcd?
snip

It's in transit.

Not really. Found it in surplus. About $100US plus $30US for shipping.
Seller says it works, we'll see. g

Opening Aspire 3610
 

doS wrote:
wish I had known, I just sold one on ebay for 53.00 USD
you can email me if you need more help, be glad to assist you.
snip

Damn! Wish I had known also. I'll get back to you.

Louie