HardwareBanter

HardwareBanter (http://www.hardwarebanter.com/index.php)
-   Overclocking AMD Processors (http://www.hardwarebanter.com/forumdisplay.php?f=12)
-   -   overclock question (http://www.hardwarebanter.com/showthread.php?t=105072)

Lee August 21st 05 09:49 PM

overclock question
 
Ok I got a 2500+ XP mobile processor unlocked :) I don't know best way to
start the overclocking road, should i first start lowering multiplier and
working my fsb up? or should i start straight at 200fsb and see if it goes
straight away without any changes?
Some advice on best starting of :)
Thanks.

chris August 21st 05 11:05 PM

I hope you mean that it came that way and you didn't unlock it...because, I
believe they all come that way.

As for overclocking, that depends on your board and RAM. My mobile 2500 is
running @ 2.3Ghz and 209Mhz....however, I had to raise the voltage
considerably.

If you are going to start off with 200Mhz, be sure to drop the multiplier or
seriously increase voltage. Otherwise, your system may not post. Also,
keep a sharp eye on CPU temp as the voltage goes up!

--
"All problems have a simple solution! The more complex the solution, the
more ludicrous the analogy!"
"Lee" wrote in message
...
Ok I got a 2500+ XP mobile processor unlocked :) I don't know best way to
start the overclocking road, should i first start lowering multiplier and
working my fsb up? or should i start straight at 200fsb and see if it goes
straight away without any changes?
Some advice on best starting of :)
Thanks.




Donny Broome August 22nd 05 12:21 AM

This might help, not su

http://compreviews.about.com/od/cpus...hlonXP2500.htm


--
--------------------------------------------------
Donny Broome
donny AT broomeman DOT com
Kill Spyware! Visit:
http://www.broomeman.com/spyware/
--------------------------------------------------


"Lee" wrote in message
...
Ok I got a 2500+ XP mobile processor unlocked :) I don't know best way to
start the overclocking road, should i first start lowering multiplier and
working my fsb up? or should i start straight at 200fsb and see if it goes
straight away without any changes?
Some advice on best starting of :)
Thanks.




gringo August 22nd 05 11:58 AM

my 2500+ AXD isn't unlocked. I can only get 195mhz out of it at default 11
x

Annoyed as I bought it off of ebay thinking it was a mobile (ad stated it
was) as I was hoping to get 220+ mhz out of system bus.





"Donny Broome" wrote in message
...
This might help, not su

http://compreviews.about.com/od/cpus...hlonXP2500.htm


--
--------------------------------------------------
Donny Broome
donny AT broomeman DOT com
Kill Spyware! Visit:
http://www.broomeman.com/spyware/
--------------------------------------------------


"Lee" wrote in message
...
Ok I got a 2500+ XP mobile processor unlocked :) I don't know best way to
start the overclocking road, should i first start lowering multiplier and
working my fsb up? or should i start straight at 200fsb and see if it
goes
straight away without any changes?
Some advice on best starting of :)
Thanks.







All times are GMT +1. The time now is 11:28 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com