Presario 2700 (2710US) Power Problem (Heat?)
I have 2 Compaq Presario 2710US laptops, both with the same symptom.
When I power on, the fans kick on high speed almost immediately (well before windows loads) then the system shuts off. I'm guessing heat problems, both systems have been cleaned with pressurized air. I contacted Compaq but they were little help. I've tried running linux from a CD, no luck. I've updated the BIOS, no luck. Any ideas? |
I know some Presario notebooks were shipped without the proper thermal
compound between the processor and heatsink. Have you checked that there is thermal compound between them? HH "Jay" wrote in message oups.com... I have 2 Compaq Presario 2710US laptops, both with the same symptom. When I power on, the fans kick on high speed almost immediately (well before windows loads) then the system shuts off. I'm guessing heat problems, both systems have been cleaned with pressurized air. I contacted Compaq but they were little help. I've tried running linux from a CD, no luck. I've updated the BIOS, no luck. Any ideas? |
The 2700's are well known for the hold down lugs coming loose from the
systemboard. These fasten the Fan and heatsink to the CPU and thats generally why the high fan at startup occurs. It requires resoldering the lugs and some disassembly. Weve done a ton of these and if you need help just yell. www.ikenfixit.com |
I also have a Presario 2700 with this problem. Did you manage to
resolve it? If so I would be grateful if you would let me know what to do. Regards |
Yes we do have a repair for the issue and it should be permanent..
Requires replacing the holddowns or lugs w/standoffs and they have been doing fine as of yet. Glad to help if we can.. Ken |
All times are GMT +1. The time now is 02:29 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com