Compaq N610c
 

Don't understand this one.

Have an N610c notebook.

When I switch it on I get the Compaq logo and the usual "press F10 to enter
setup" Then the screen goes blank and XP boots up. The reason I know this
is because you hear the XP startup tune.

Also if you do press F10 to go into setup the screen goes blank.

If you plug in an external CRT monitor you can see the bios settings, or if
XP boots up, you can see the XP desktop.

So to summarize - when you switch on notebook the screen has a brief sign of
life and then nothing.

Has anybody any idea what is wrong?

Thanks in advance.

D.

Just as a SWAG, could it be set to CRT (external) vs. LCD (internal).
Old 486 laptop I keep around just for DOS Telnet/terminal apps is like that.
As I recall, on boot it loads w/the LCD display running and then switches to
CRT, or at least that is what I recall from the last time I had a CRT hooked
up to it.

KC

"Tek" wrote in message
k...
Don't understand this one.

Have an N610c notebook.

When I switch it on I get the Compaq logo and the usual "press F10 to
enter
setup" Then the screen goes blank and XP boots up. The reason I know this
is because you hear the XP startup tune.

Also if you do press F10 to go into setup the screen goes blank.

If you plug in an external CRT monitor you can see the bios settings, or
if
XP boots up, you can see the XP desktop.

So to summarize - when you switch on notebook the screen has a brief sign
of
life and then nothing.

Has anybody any idea what is wrong?

Thanks in advance.

D.

hi. try pressing fn -F4

fn button in bottom left of keyboard.. this toggles between lcd.. lcd and
crt.... crt only.....then back to lcd...etc....
i work for compaq/hp....and am typing on a n610c right now....

"Tek" wrote in message
k...
Don't understand this one.

Have an N610c notebook.

When I switch it on I get the Compaq logo and the usual "press F10 to
enter
setup" Then the screen goes blank and XP boots up. The reason I know this
is because you hear the XP startup tune.

Also if you do press F10 to go into setup the screen goes blank.

If you plug in an external CRT monitor you can see the bios settings, or
if
XP boots up, you can see the XP desktop.

So to summarize - when you switch on notebook the screen has a brief sign
of
life and then nothing.

Has anybody any idea what is wrong?

Thanks in advance.

D.

Inverter or backlight?? Shine a light on the screen and see if the
video is operating in the background.. (Without ext. Monitor)....