AudioGrabber not sensing silence between tracks
Hi! There! Apologies if I'm in the wrong group, if so maybe someone
can point me to a more suitable one. I'm using Audiograbber v 1.83. and copying from an audio cassette tape to the HD. Surprisingly given my limited computer skills the program works fine, except it will not detect the lack of audio between tracks and simply records them as one wave file one after the other. The settings seem the obvious ones: - Auto split tracks, Track split sensitivity maximum (and all points between 1 & 9) When in the manual recording mode as expected the curser moves to the next track when the stop button in the program is pressed and records when the record button is pressed. During the lack of audio between tracks there is no detectable sound when listening close to the speaker and the volume meter indicates a single bar the same as if the line input is disabled, so seems that an extraneous signal is not the cause. All other inputs have been disabled except the line in. Am I correct in assuming that the prog should automatically move down the track name list each time one track finishes and record the next track as it does in manual mode? Probably too long winded of me but better too much info than not enough! Thanks for your time. Using WinXP Walt. |
All times are GMT +1. The time now is 01:15 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com