PCI IRQ Routing Table Error on POST causes loads of video problems.
 

Does anyone know what that means? I just bought a new motherboard &
amd64 athlon; The mobo does not have onboard video, but I have this PCI
ATI Rage Card. I have 5 PCI slots, & an AGP slot.

After POST, I get a 'PCI IRQ routing table error [0:05:00]". My mobo is
MSI K8T Neo-V (MS-7032) w/latest BIOS (which is AMI) off the MSI site
(version 5.0). My video card is the only device using an expansion
slots.

Problem 1: IRQ Routing table error [0:05:00]

Problem 2: Load defaults always gives the 8-beep error (from
http://www.ami.com/support/doc/AMIBIOS-codes.pdf: 8 beeps=display
memory error, also, "If the system video adapter is an add-in card,
replace or reseat the
video adapter. If the video adapter is an integrated part of the system
board, the board may be faulty.")

Problem 3a: On setup of Win2k, BSODs saying that the BIOS is not fully
ACPI compliant & tells me to install disabling HAL/ACPI (by pressing
F7)
Problem 3b: Disabling HAL/ACPI installs, but the end result is video @
640x480 x 16 colors, and unable to install drivers; Error in device
manager says the BIOS did not supply enough info to properly configure
the device

Problem 4: Windows XP installs perfectly, however, video is super
crappy. I'm not a gamer so take that into consideration cause "crappy"
to a gamer might be normal to me. So when I say something's crappy,
it's absolutely horrid. For example, scrolling a simple window like
notepad visually repaints the window like I was downloading a picture &
displaying as it comes using a dialup connection....this process also
runs the CPU up to 70-90% and takes about 2 seconds.

I've tried different memory, uninstalled all hardware except memory,
CPU, and video card & still have the same result.

ANY help or at least pointers?

PCI IRQ Routing Table Error on POST causes loads of video problems.
 

It is further alleged that on or about 27 Mar 2006 22:52:17 -0800, in
alt.comp.hardware.pc-homebuilt, the queezy keyboard of "jonfaquit"
spewed the following:

|Does anyone know what that means? I just bought a new motherboard &
|amd64 athlon; The mobo does not have onboard video, but I have this PCI
|ATI Rage Card. I have 5 PCI slots, & an AGP slot.
|
|After POST, I get a 'PCI IRQ routing table error [0:05:00]". My mobo is
|MSI K8T Neo-V (MS-7032) w/latest BIOS (which is AMI) off the MSI site
|(version 5.0). My video card is the only device using an expansion
|slots.
|
|Problem 1: IRQ Routing table error [0:05:00]
|
|Problem 2: Load defaults always gives the 8-beep error (from
|http://www.ami.com/support/doc/AMIBIOS-codes.pdf: 8 beeps=display
|memory error, also, "If the system video adapter is an add-in card,
|replace or reseat the
|video adapter. If the video adapter is an integrated part of the system
|board, the board may be faulty.")
|
|Problem 3a: On setup of Win2k, BSODs saying that the BIOS is not fully
|ACPI compliant & tells me to install disabling HAL/ACPI (by pressing
|F7)
|Problem 3b: Disabling HAL/ACPI installs, but the end result is video @
|640x480 x 16 colors, and unable to install drivers; Error in device
|manager says the BIOS did not supply enough info to properly configure
|the device
|
|Problem 4: Windows XP installs perfectly, however, video is super
|crappy. I'm not a gamer so take that into consideration cause "crappy"
|to a gamer might be normal to me. So when I say something's crappy,
|it's absolutely horrid. For example, scrolling a simple window like
|notepad visually repaints the window like I was downloading a picture &
|displaying as it comes using a dialup connection....this process also
|runs the CPU up to 70-90% and takes about 2 seconds.
|
|I've tried different memory, uninstalled all hardware except memory,
|CPU, and video card & still have the same result.
|
|ANY help or at least pointers?

Interesting, I believe all your problems would be solved by simply
installing an AGP card.
--
-nos1eep

PCI IRQ Routing Table Error on POST causes loads of video problems.
 

jonfaquit wrote:
Does anyone know what that means? I just bought a new motherboard &
amd64 athlon; The mobo does not have onboard video, but I have this
PCI ATI Rage Card. I have 5 PCI slots, & an AGP slot.

After POST, I get a 'PCI IRQ routing table error [0:05:00]". My mobo
is MSI K8T Neo-V (MS-7032) w/latest BIOS (which is AMI) off the MSI
site (version 5.0). My video card is the only device using an
expansion slots.

Problem 1: IRQ Routing table error [0:05:00]

Problem 2: Load defaults always gives the 8-beep error (from
http://www.ami.com/support/doc/AMIBIOS-codes.pdf: 8 beeps=display
memory error, also, "If the system video adapter is an add-in card,
replace or reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.")

Problem 3a: On setup of Win2k, BSODs saying that the BIOS is not fully
ACPI compliant & tells me to install disabling HAL/ACPI (by pressing
F7)
Problem 3b: Disabling HAL/ACPI installs, but the end result is video @
640x480 x 16 colors, and unable to install drivers; Error in device
manager says the BIOS did not supply enough info to properly configure
the device

Problem 4: Windows XP installs perfectly, however, video is super
crappy. I'm not a gamer so take that into consideration cause "crappy"
to a gamer might be normal to me. So when I say something's crappy,
it's absolutely horrid. For example, scrolling a simple window like
notepad visually repaints the window like I was downloading a picture
& displaying as it comes using a dialup connection....this process
also runs the CPU up to 70-90% and takes about 2 seconds.

I've tried different memory, uninstalled all hardware except memory,
CPU, and video card & still have the same result.

ANY help or at least pointers?

have you tried a different graphics card?
did you bother to install the chipset drivers before trying to install the
graphics?

--
sbb78247

Speak the truth and leave shortly there after

PCI IRQ Routing Table Error on POST causes loads of video problems.
 

-nos1eep wrote:

Interesting, I believe all your problems would be solved by simply
installing an AGP card.
--
-nos1eep

Haha...I just ordered an AGP card (geforce 420...for about $15). Gonna
see if I get the same result(s).

------------------------
-sbb78247 wrote:

have you tried a different graphics card?
did you bother to install the chipset drivers before trying to install the
graphics?

Haven't tried any other graphics cards cause this is the only one I
have...I've always stuck with onboard video whenever purchasing a
motherboard cause onboard suits my needs perfectly. I only had this
card because it has an RCA connection so that I can connect my TV to it
& use it as another monitor.

I can't install anything without the graphics though...cause I can't
see anything (and I think BIOS gives the beeping errors too if it
doesn't find a suitable PCI/AGP card).

PCI IRQ Routing Table Error on POST causes loads of video problems.
 

Oh yeah, you know what else is funny? MSI, the brand of motherboard
that I have, technical support said the same thing...use an AGP card
and retest...

PCI IRQ Routing Table Error on POST causes loads of video problems.
 

Some lspci -vvv linux info if it helps: Question, why does it say AGP
when this is a PCI card?

0000:00:05.0 VGA compatible controller: ATI Technologies Inc Rage
Mobility P/M AGP 2x (rev 64) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage Mobility P/M AGP 2x
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- TAbort- MAbort- SERR- PERR-
Latency: 64 (2000ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fd000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: I/O ports at e800 [size=256]
Region 2: Memory at febff000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=none
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)

PCI IRQ Routing Table Error on POST causes loads of video problems.
 

in the bios..change the switch
PnP OS installed? - NO/YES whichever is the opposite of the current setting.
reset configuration data -YES
If you have
'USE MS routing table' or
'enable ms ROUTING TABLE'? - ENABLED

"jonfaquit" wrote in message
oups.com...
Does anyone know what that means? I just bought a new motherboard &
amd64 athlon; The mobo does not have onboard video, but I have this PCI
ATI Rage Card. I have 5 PCI slots, & an AGP slot.

After POST, I get a 'PCI IRQ routing table error [0:05:00]". My mobo is
MSI K8T Neo-V (MS-7032) w/latest BIOS (which is AMI) off the MSI site
(version 5.0). My video card is the only device using an expansion
slots.

Problem 1: IRQ Routing table error [0:05:00]

Problem 2: Load defaults always gives the 8-beep error (from
http://www.ami.com/support/doc/AMIBIOS-codes.pdf: 8 beeps=display
memory error, also, "If the system video adapter is an add-in card,
replace or reseat the
video adapter. If the video adapter is an integrated part of the system
board, the board may be faulty.")

Problem 3a: On setup of Win2k, BSODs saying that the BIOS is not fully
ACPI compliant & tells me to install disabling HAL/ACPI (by pressing
F7)
Problem 3b: Disabling HAL/ACPI installs, but the end result is video @
640x480 x 16 colors, and unable to install drivers; Error in device
manager says the BIOS did not supply enough info to properly configure
the device

Problem 4: Windows XP installs perfectly, however, video is super
crappy. I'm not a gamer so take that into consideration cause "crappy"
to a gamer might be normal to me. So when I say something's crappy,
it's absolutely horrid. For example, scrolling a simple window like
notepad visually repaints the window like I was downloading a picture &
displaying as it comes using a dialup connection....this process also
runs the CPU up to 70-90% and takes about 2 seconds.

I've tried different memory, uninstalled all hardware except memory,
CPU, and video card & still have the same result.

ANY help or at least pointers?

PCI IRQ Routing Table Error on POST causes loads of video problems.
 

BIOS contains no such entry....thanks to MSI :)

PCI IRQ Routing Table Error on POST causes loads of video problems.
 

clear the CMOS and then load 'default' settings

"jonfaquit" wrote in message
oups.com...
BIOS contains no such entry....thanks to MSI :)

PCI IRQ Routing Table Error on POST causes loads of video problems.
 

I've had to have cleared the CMOS about 30 times so far :)

'Load defaults' even gives me the 8 error beeps...

I just tried throwing this video card in my old 32bit system and as I
thought, no problem whatsoever, so it can't be the card.