HardwareBanter

HardwareBanter (http://www.hardwarebanter.com/index.php)
-   General (http://www.hardwarebanter.com/forumdisplay.php?f=28)
-   -   Monitors turning off (http://www.hardwarebanter.com/showthread.php?t=16605)

Kaz February 17th 05 04:12 PM

Monitors turning off
 
I have a very frustrating problem, in that it is very intermittent. I can
start the PC but within 5 to 10 minutes usually, the monitor will turn
itself off (the on off button will go amber....of flash...according to the
type of monitor) I have tried three monitors on the system and it has
happened with all three, over a period of about three months. The monitors
cannot be turned back on via the switches and powering off the PC and
restarting is the only way to get going again, and the machine will operate
fine for the rest of the day. One monitor gave the message ATTENTION 37K/OHZ
FREQUENCY IS OUT OF RANGE. This problem is very intermittent, in that it can
be fine for weeks, and then all of a sudden this problem returns for no
obvious reason. All power settings are turned off....that is, no sleep mode
or hibernating. PC is P4 running WinXP Home, GeForce4 MX440-8X.
Any ideas please.

Regards
Kaz



Jerry G. February 18th 05 02:41 AM

It may be that your display card set-up is not correct for the type of
monitors that you are running. The resolution, and or the refresh rate may
be too high. This is the reason for the warning.

As for not turning on, make sure that the power settings are not set to
allow standby, or to shut the monitor after a certain period.

As for the standby mode, depending on the combinations, many PC machines,
and their operating systems have problems to manage it. Turn off the auto
off features and see if the monitors are more stable.

--

Jerry G.
=====

"Kaz" wrote in message
...
I have a very frustrating problem, in that it is very intermittent. I can
start the PC but within 5 to 10 minutes usually, the monitor will turn
itself off (the on off button will go amber....of flash...according to the
type of monitor) I have tried three monitors on the system and it has
happened with all three, over a period of about three months. The monitors
cannot be turned back on via the switches and powering off the PC and
restarting is the only way to get going again, and the machine will operate
fine for the rest of the day. One monitor gave the message ATTENTION 37K/OHZ
FREQUENCY IS OUT OF RANGE. This problem is very intermittent, in that it can
be fine for weeks, and then all of a sudden this problem returns for no
obvious reason. All power settings are turned off....that is, no sleep mode
or hibernating. PC is P4 running WinXP Home, GeForce4 MX440-8X.
Any ideas please.

Regards
Kaz




Kaz February 18th 05 01:00 PM

Display card set-up has not changed in 18 months. Refresh rate set at the
lowest....60Hz as well as screen resolution (800x600) All monitors tried on
system have been standard CRT. All auto power features have been turned off.
This problem of the monitor turning off is so random, that I cannot pinpoint
any common event.....except that it usually happens within 5 minutes or so
of booting up PC.

Kaz

"Jerry G." wrote in message
...
It may be that your display card set-up is not correct for the type of
monitors that you are running. The resolution, and or the refresh rate may
be too high. This is the reason for the warning.

As for not turning on, make sure that the power settings are not set to
allow standby, or to shut the monitor after a certain period.

As for the standby mode, depending on the combinations, many PC machines,
and their operating systems have problems to manage it. Turn off the auto
off features and see if the monitors are more stable.

--

Jerry G.
=====

"Kaz" wrote in message
...
I have a very frustrating problem, in that it is very intermittent. I can
start the PC but within 5 to 10 minutes usually, the monitor will turn
itself off (the on off button will go amber....of flash...according to the
type of monitor) I have tried three monitors on the system and it has
happened with all three, over a period of about three months. The monitors
cannot be turned back on via the switches and powering off the PC and
restarting is the only way to get going again, and the machine will

operate
fine for the rest of the day. One monitor gave the message ATTENTION

37K/OHZ
FREQUENCY IS OUT OF RANGE. This problem is very intermittent, in that it

can
be fine for weeks, and then all of a sudden this problem returns for no
obvious reason. All power settings are turned off....that is, no sleep

mode
or hibernating. PC is P4 running WinXP Home, GeForce4 MX440-8X.
Any ideas please.

Regards
Kaz






Pen February 18th 05 02:36 PM

At this point you need to change the video
card. The symptoms are clearly that the
display card is acting up.

"Kaz" wrote in message
...
Display card set-up has not changed in 18 months. Refresh rate set at
the
lowest....60Hz as well as screen resolution (800x600) All monitors
tried on
system have been standard CRT. All auto power features have been
turned off.
This problem of the monitor turning off is so random, that I cannot
pinpoint
any common event.....except that it usually happens within 5 minutes
or so
of booting up PC.

Kaz

"Jerry G." wrote in message
...
It may be that your display card set-up is not correct for the type
of
monitors that you are running. The resolution, and or the refresh
rate may
be too high. This is the reason for the warning.

As for not turning on, make sure that the power settings are not set
to
allow standby, or to shut the monitor after a certain period.

As for the standby mode, depending on the combinations, many PC
machines,
and their operating systems have problems to manage it. Turn off the
auto
off features and see if the monitors are more stable.

--

Jerry G.
=====

"Kaz" wrote in message
...
I have a very frustrating problem, in that it is very intermittent. I
can
start the PC but within 5 to 10 minutes usually, the monitor will
turn
itself off (the on off button will go amber....of flash...according
to the
type of monitor) I have tried three monitors on the system and it has
happened with all three, over a period of about three months. The
monitors
cannot be turned back on via the switches and powering off the PC and
restarting is the only way to get going again, and the machine will

operate
fine for the rest of the day. One monitor gave the message ATTENTION

37K/OHZ
FREQUENCY IS OUT OF RANGE. This problem is very intermittent, in that
it

can
be fine for weeks, and then all of a sudden this problem returns for
no
obvious reason. All power settings are turned off....that is, no
sleep

mode
or hibernating. PC is P4 running WinXP Home, GeForce4 MX440-8X.
Any ideas please.

Regards
Kaz







Kaz February 18th 05 03:13 PM

That's what I have been thinking. This system is 2 years old and I had to
replace the original GeForce 4 card as the fan died. I chose the GeForce
MX440 with the heat sink but looks like I will have to get away from NVIDIA.
Could it possibly be just a bad connection.....or could dust be the
culprit....I am not comfortable in ripping into the insides of my PC but
will get someone to check it out...if we know what we are looking for.

"Pen" wrote in message
...
At this point you need to change the video
card. The symptoms are clearly that the
display card is acting up.

"Kaz" wrote in message
...
Display card set-up has not changed in 18 months. Refresh rate set at
the
lowest....60Hz as well as screen resolution (800x600) All monitors
tried on
system have been standard CRT. All auto power features have been
turned off.
This problem of the monitor turning off is so random, that I cannot
pinpoint
any common event.....except that it usually happens within 5 minutes
or so
of booting up PC.

Kaz

"Jerry G." wrote in message
...
It may be that your display card set-up is not correct for the type
of
monitors that you are running. The resolution, and or the refresh
rate may
be too high. This is the reason for the warning.

As for not turning on, make sure that the power settings are not set
to
allow standby, or to shut the monitor after a certain period.

As for the standby mode, depending on the combinations, many PC
machines,
and their operating systems have problems to manage it. Turn off the
auto
off features and see if the monitors are more stable.

--

Jerry G.
=====

"Kaz" wrote in message
...
I have a very frustrating problem, in that it is very intermittent. I
can
start the PC but within 5 to 10 minutes usually, the monitor will
turn
itself off (the on off button will go amber....of flash...according
to the
type of monitor) I have tried three monitors on the system and it has
happened with all three, over a period of about three months. The
monitors
cannot be turned back on via the switches and powering off the PC and
restarting is the only way to get going again, and the machine will

operate
fine for the rest of the day. One monitor gave the message ATTENTION

37K/OHZ
FREQUENCY IS OUT OF RANGE. This problem is very intermittent, in that
it

can
be fine for weeks, and then all of a sudden this problem returns for
no
obvious reason. All power settings are turned off....that is, no
sleep

mode
or hibernating. PC is P4 running WinXP Home, GeForce4 MX440-8X.
Any ideas please.

Regards
Kaz









Bill February 18th 05 10:15 PM

I have exactly the same problem. My monitor turns off by itself but at
random intervals. I have a Geforce FX5200 which I am sure is the
cause, but how do I prove it???


kony February 19th 05 03:13 AM

On 18 Feb 2005 17:15:40 -0500,
lid (Bill) wrote:

I have exactly the same problem. My monitor turns off by itself but at
random intervals. I have a Geforce FX5200 which I am sure is the
cause, but how do I prove it???


Trying another monitor with same card or a different (video)
card with same monitor, might be a start.

Check to see if card is overheating, and the power
management timeout settings (possibly disabling power
management as a troubleshooting step).

Bill February 19th 05 03:15 PM

Ok folks...........this may be of some help. I think I fixed my
monitor turning off problem.
There was a dry joint (unsoldered joint) on U13 on the graphics card.

May be an idea to whip out the graphics card and do a full inspection
of all the joints.

Cheers


kony February 19th 05 07:15 PM

On 19 Feb 2005 10:15:37 -0500,
lid (Bill) wrote:

Ok folks...........this may be of some help. I think I fixed my
monitor turning off problem.
There was a dry joint (unsoldered joint) on U13 on the graphics card.

May be an idea to whip out the graphics card and do a full inspection
of all the joints.

Cheers


You're fortunate, most would not have caught that problem.
What make/model of card is it and what part is U13?

Bill February 20th 05 12:15 AM

hi, the card is an nvidea ge force fx5200 and I only know these things
cause I build printed circuit boards for a living :D . Although the
manufactures do tests they are not exhaustive.........so was worth a
look....and hey worked for me and might work for others
too...........what was the alternative take it back to the
shop????..........well i dont trust them do you???

Cheers



All times are GMT +1. The time now is 09:21 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com