Hi, just installed AIDA32 and it tells me that my memory is made by Nanya, the chips are marked as Elixar and the id shows with AIDA32 as Nanya, are Nanya any good? Who else do they supply chips for? Presntly waiting for delivery of PC3200 OCZ 512mb memory chip and hoping it will run with this...

I tried one off my system to see how quiet there are and found that they make a good bit of noise at full throttle. How cool will it keep a CPU at the lowest setting? Does anyone know what the RPM range is for the fan? Thanks. -- Asus A7N8X deluxe rev. 2.0 AMD XP 3200+, 400fsb Corsair 512 meg x 2,...

Up until today I was truly skeptical about how different goops can effect your temps... When I was using some generic crap on my XP2600+/Coolermaster HAC-V81 XDream I was getting idle temps of around 47C, sometimes higher. I attacked the HSF with a bit of 1200 grit wet & dry paper and slapped on...

Hi folks, Motherboard is Asus A7N8X deluxe PCB Ver 2.0 which supports a 400 FSB CPU is Athlon Barton 2500XP ("Real" Internal Clock Speed is 1.83Ghz) This CPU officialy supports a 333 FSB Memory is Crucial PC3200 (CAS=3) I understand the "Official" motherboard settings I should be using a CPU...

Depends how much FEA taxes the CPU ALU. There are significant differences between P4 and Athlon (Tbred and Barton) chips, in this respect. Check out CPU reviews - which feature appropriate benchies with and w/o overclocks. "Posting 2002" wrote in...

On Mon, 30 Jun 2003 18:00:12 -0400, Donn Ganley wrote: MB ASUS A7V266-E bios 11 - using 17X133 settings, get reading of 2282 using AMD's CPU measurement software - Sandra also - carefully using my "realtime" FS2002 simulator FPS flight pattern, I definately get increase over stock setting...

On Sun, 29 Jun 2003 21:52:33 +0000, ZaXXoN wrote: Got allmost all the necessary info here for my old Abit KT7A-Raid board - but, a supplyer for a XP 2100 cpu with a "B core". Anybody know of a verified supplyer? http://www.newegg.com/app/ViewProduct.asp?submit=property&DEPA=1 --

hi i am new here and i need some help i have an Asrock K7VM2 with a xp1800+ and 1 x 128 and 1 x 256 (both pc133) i have just upgraded to the K7VM2 and when windows 2000 pro loads up it gets to the the logo screen then says it can not read the boot drive but in windows 98 it works adrian

If I go out & get myself a new Nforce2 dual channel board & a 2500+ could I make due with the RAM I got now? 2 sticks, 256 meg a piece of Corsair PC2700 CL2 RAM. Good stuff, & I really got no other use for it.

Hi All, I just put together an old AMD Athlon 1 Gig chip with a stick of 256DDR ram, an old WDC HDD, a new case, and a new Gigabyte GA-7VKMP mobo. After about an hour's worth of computing, (installing win2K, service packs, browsing, etc) I was setting up a Win2K/RH7.1 dualboot, when I restarted...

http://www.bellfruits.com/index

http://www.bellfruits.com/index

Comcast is screwing with our newsreader -- Michael Zentner

Hi gang, been lurking for a while and have some ?'s. My system: K7 Athlon 750 (don't laugh) (chip says AMD-K7750MTR52B A) ( 210027534591 ) does this mean anything to anybody? Biostar M7MKE MB VIA Apollo KX133/686A Chipset

Is it necessary to up the voltage on a Barton 2500+ ? I presently run it at 1.65 and 2.14 ghz, my temps on a normal day are 42C idle 51C load, system temp on a hot day goes to 34C with FSB set to 174 mhz on the memory. Is there folk running Barton 2500+ at 3000+ speed WITHOUT upping the voltage??...

What's the fastest XP2100+ overclock anyone's aware of on an NF2 board ?

hello i need some advice i have xp2000 A running at 10x166 v1.72 and it work fine for 4 months but few days a go i discovered that some of my games starting to crash at random moments after few test and investigation i set cpu to it default settings 12.5x133 v1.66

I am putting together another system for a friend, nothing big, she just wanted a computer. The mobo is the abit kt7a, when I plug the harddrive into one ide channel and the c/d-rw into another ide channel, it will see one but not both...:::????? what the heck am I doing wrong??????? I have tried...

On Sat, 26 Apr 2003 12:57:12 -0700, Werner wrote: "Wes Newell" wrote in message ... On Sat, 26 Apr 2003 09:59:21 -0700, Werner wrote: Look he ...

SHUTTLE AK32A. I bought this board some mounths ago for a buddy's system. It has a Duron 1GHZ CPU and Curtail PC2100 DDR 256MB cas 2.5 Seagate HDD 40gig. It's been running fine since installation but now is getting disc errors. I ran the Seagate Diag tool's and say's disc is PHYSICALLY OK. ScanDisk...