|
|
|
|
18 |
1,836 |
|
|
Arctic temps by
QED, eh ?
Ran out of AS3 today.
Used the Zalman (white) thermal goop.
Don't know if it's a fair test, but I swapped an XP1700 x 224 =
2128MHz for an 1800 DLT3C@10 x 224 = 2240MHz - and full load went up from
57C to 64C.
Regooping when AS3 supplies arrive, so I'll let you know the score.
On a...
|
|
2 |
367 |
|
|
Athlon 1800+ ?'s by
Nicholas Moore
I got an athlon 1800 thoroughbred A. and i would like to know what is the
max voltage i should give it. it's at 1.625 now and what is the max temp i
should get it too, it's at 43 degrees. I'm running it on an Abit KX7-333R
with the FSB at 175 and the multiplyer at 10. i'm wanting to know how...
|
|
1 |
584 |
|
|
multiplier problem by
mjf
I sent my cpu in the bios to 100ghz it runs fine , But the cpu is a athlon
2000+ when I set the multiplier to 166ghz it doesn't boot. the jumpers are
set to default on the board.
the board is a ASUS A7N8X . I'm setting the multiplier to 12.5 should I
go higher. thank you Mike
|
July 9th 03 03:32 AM
by mjf
|
1 |
771 |
|
|
wich chip by
Dave
Spend £50 on an XP1700 DLT3C from www.cpucity.com and then overclock it to
XP2600 speed easily without any risk of damaging the chip.
If your motherboard isn't up to it, then spend another £90 or so on an Epox
8RDA and you'll still end up having £60 left for beer :-)
Dave
"Graham"...
|
|
2 |
585 |
|
|
|
July 8th 03 11:43 PM
by Eyman
|
0 |
959 |
|
|
|
July 8th 03 11:43 PM
by Eyman
|
0 |
1,186 |
|
|
What RAM for 2800XP Barton? by
raffe
I've built a PC based on Asus A7N8X with AMD 2800XP Barton CPU and 1GB RAM.
To this day I haven't managed to overclock it. I wonder if this has
something to do with the RAM I'm using which is 333Mhz. Since I am building
a simmilar PC to have at work I wonder if buying 400Mhz RAM would be a
better...
|
|
5 |
611 |
|
|
A Question by
Doughnut
Look in the Bios and make sure the FSB is set to 166.
doughnut
"Sean" wrote in message
...
I just bought a motherboard (A Biostar M7VIK) as recommended on amd's site
to be compatible with my also newly purchased 2600...
|
July 8th 03 11:15 PM
by Sean
|
5 |
382 |
|
|
XP2500 200FSB by
Toby Groves
Well I took the plunge and grabbed an XP2500.
Unfortunately it just doesn't want to know at 200FSB, regardless of the
overall speed I set.
It seems to be a reasonable overclocker, as I've currently got it at
2.3Ghz (184x12.5) at 1.675v and it's solid as a rock, but if I up the
FSB any more then...
( 1 2)
|
|
16 |
883 |
|
|
is this a good one? by
homer
MY AMD XP 2500+ is as follows
AXDA2500DKV4D
AQXEA 0323WPAW
is this a good one and how well have others overclocked it?
Core Barton
CPU Model 10
Manufacturing Process 130 nm
|
July 8th 03 07:29 PM
by homer
|
0 |
423 |
|
|
New Athlon XP system by
Dan
I'm building a new rig to be used mostly for gaming and I'm hoping to
keep the price relatively low. I will be overclocking the system to
keep the price low and performance high. I've only decided on the
radeon 9600 pro for the graphics card, as it seems to offer good
price/performance and is a...
|
|
1 |
672 |
|
|
Which overclock is better? (NF7-S v2.0) by
Robert
Thanks for the answers! More questions below.. ;-)
"QED, eh ?" wrote in message
...
"Robert" wrote in message
...
Hello,
I've just overclocked my new ABit NF-S...
|
|
8 |
1,033 |
|
|
cpu usage high with zero load by
Peter Herrington
Hi
I have and amd system 1.2 overclocked to 1.3 on asus
mobo a7n266-vm.ram 256mb ddr ,40gb hdd.
It has been stable for a year,but all of a sudden 2 thing began to
happen.After bootup into winme,moving the mouse caused the cpu to move
backwards to zero,as per cool beans system info at...
|
|
3 |
903 |
|
|
What the hell was that name ..... ? by
QED, eh ?
Anybody know the name of the price comparison site for hardware in the US
? - ("pricewatch" or something like that).
TIA
QED, eh ?
|
|
1 |
657 |
|
|
|
|
0 |
233 |
|
|
Most overclockable AMD CPU? by
QED, eh ?
1700 or 1800 DLT3C's get the best o/c's.
Indeed, I've just ordered one of the latter to replace my 1700 DUT3C -
currently at 224 x 9.5 = 2128 (which'll replace the house-server's 800MHz) -
in the hope of reaching anything from 2300 to 2500MHz.
I'll let you know how it goes (tomorrow).
I also...
|
July 7th 03 05:44 PM
by Ken
|
1 |
501 |
|
|
dvd playing problems of memory? by
locos
Hi there,
Have a T-Bird 1200, 256MB, GeForce2GTS tv-out and a ABIT Kt7a mobo
When playing a dvd on my tv/pc after a while it stopped for having "cannot
read" problem 0x5f4012a1 at 0000004
what could this be? pagefile.sys is adapted but I don't have any clue.
Anybody please help!
|
July 7th 03 04:50 PM
by locos
|
2 |
725 |
|
|
Whats the difference? by
Andrew Poyser
What is the difference between a palamino chip and a thourghbred chip.
|
|
4 |
584 |
|
|
Anandtech-- in bed with Intel?! by
Wes Newell
On Mon, 30 Jun 2003 07:47:26 -0700, Fishface wrote:
Gee, I wonder who is on the sh*t end of the stick.
I just read the "review" of the P4 3.2. It is interesting what
AMD did with the PR numbers, however it seems to me
that the benchmarks chosen strongly favor the P4. Video
encoding...
|
July 7th 03 03:42 PM
by jaster
|
3 |
391 |