|
|
GA-EP35-DS4 - Booting weird behaviour by
The_PoLe
Hi guys,
I got a new CPU a week ago and I've realized some weird behavour when
booting.
Sometimes I hear one long beep following by a short beep, then a pause,
and then a short beep. Other times I just hear a short beep.
I've looked in the mothermoard manual and it says that 1long beep - 1
short...
|
June 10th 08 09:40 PM
by Tim S.
|
1 |
491 |
|
|
GA-P965-DS3 rev 3.3 F13Q BIOS issue by
John Bissell
After installing F13Q I noticed that my CPU fan was running much louder. I
checked the fan speed using EasyTune and it showed about 2450 RPM (Arctic
Freezer 7 Pro). The CPU temp was around 54C (E8400 overclocked). I have C1E
and EIST disabled.
I reflashed back to the F13o and the fan speed...
|
|
3 |
482 |
|
|
X38 DS4 by
name[_3_]
I've researched the X38 DS4 and it seems like a good board and has all the
features that I want. I was wondering if the're any issues with this board.
Any feedback would be appreciated.
I plan on runnig an E8400, 2x1GB Corsair 8500C5 and a BFG 8600GT.
TIA,
john
|
|
4 |
483 |
|
|
GigaByte GA-MA78GM-S2H - no sound ~ hdmi by
heavycaliber
Hello Everyone, i have the system configured and all of the drivers
loaded. AM2 4450e, 2gb crucial ballistix 800mhz, segate 300gb sata,
philips dhmi cable, sony bravia LCD tv.
I have the digital sound enabled but I am not getting sound to my
television. Seems there is an ATI HDMI option anda...
|
June 7th 08 08:55 PM
by Paul
|
1 |
547 |
|
|
Cost-effective Quad core system by
R[_3_]
I've been trying to configure a second system using PCI boards. Since
I'll need as many slots as possible, the GA-P35-S3G was recommended.
(I haven't been able to locate a similar ASUS board---does anything
exist?)
I'd be using the system for downloads, background processing, etc. so
I'm...
( 1 2)
|
|
19 |
1,128 |
|
|
GA-P35-DS3R - Reboot to stock when overclock unstable? by
jaxstraww
Does this board do that? I have the EX38-DS4 board and when I was
getting my feet wet with over clocking the board would take 20 seconds
and reboot to stock when I had an unstable overclock. Great feature.
Looking at a second board for lighter duty work and decided on the P35-
DS3R model but unsure...
|
|
2 |
550 |
|
|
GA-965P-DS3 F13Q BIOS Issue by
John Bissell
When I got my E8400 back in January, I updated my GA-965P-DS3 rev 3.3 board
to the F13o BIOS which provided support for the 45nm processors. A few
months later, Gigabyte released the F13Q BIOS, which also claimed to support
the 45nm processors but gave no other details on changes.
After...
|
|
0 |
339 |
|
|
Hmonitor 4.4.2.1 is released by
hmonitor
New release of shareware monitoring utility Hmonitor 4.4.2.1 is
available!
Hardware sensors monitor utilizes sensor chips on smart motherboards
to track system and CPU temperatures, voltages and cooling fans. By
quickly catching an overheated computer, you can prevent disasters
such as system...
|
|
0 |
447 |
|
|
EP35C-DS3R/ Memory by
Pez
Hi all.
I recently put together a system on a Gigabyte motherboard, model #
EP35C-DS3R. I wrote to their tech department with what I’m about to
ask here, but their answer wasn’t really satisfying to me, and didn’t
make much sense to my understanding of things. But who knows, it
could just be...
|
June 2nd 08 09:12 PM
by Paul
|
1 |
795 |
|
|
ICH9R with 2 RAID0 possible? by
klausa
The Intel ICH9R allows, on Asus boards, to connect 6 SATA drives, ald
alo supports RAID0. I know that I can connect 4 drives and configure
them as one big RAID0 array. Question: Is it possible to configure 4
drives as 2 separate RAID0 arrays consisting of only 2 drives each?
(I dont have an Asus...
|
June 2nd 08 08:14 PM
by klausa
|
1 |
382 |
|
|
Motherboard not correctly recognising CPU by
farco
Quick question folks.
A mate of mine has a QX9650 and an Asus Striker Extreme motherboard.
However, the motherboard does not seem to take full advantage of the sheer power of the CPU. Upon startup, it says the BIOS requires an update to take full advantage of the CPU. When I run the asus update...
|
|
2 |
456 |
|
|
GA-MA78GM-SH2 RAID question by
Matthew[_3_]
I have 3 SATA drives and I want to set up the first in IDE mode with the OS
on it and the other 2 in a RAID0 as a file storage drive for very large
files. But when I go into the setup for the RAID it looks like it's either
all RAID or all IDE... I can't seem to find a way to mix the 2 at all.
|
May 29th 08 03:41 PM
by Paul
|
6 |
556 |
|
|
Anything special needed to get the P35-DS3R front audio working? by
Speedy Nospam
Hello,
I recently installed a Q6600 on a new P35-DS3R into an Antec Sonata II
case. The speaker/mic jacks on the back(mobo) work fine. But the two
front audio jacks don't work, which are needed for convenient
headphone/mic jack access. I had an ASUS board in the case, the front
jacks worked...
|
|
2 |
423 |
|
|
GA-G31MF-S2 wont install XP - freezes by
stu collier
GA-G31MF-S2
Intel Core 2 DUO 3ghz
2gb Pc4200 DDR II RAM
CDROM on IDE0
120GB on SATA (new HDD)
In the bios I've turned everything off, but windows XP refuses to
install, no cards installed.
Installing windows 39mins left
|
|
7 |
353 |
|
|
need info about motherboards for my PC... by
tecktalk
I wana buy a new motherboard for a new AMD x2 processor with high end graphics card and which supports 4 gb Ram..
please gimme suggestion whihc motherboard will be besst for me and will remain cool durin process.....
All suggestions are invited..!!
_____________________
acne exercise discount...
|
|
0 |
457 |
|
|
GA-P35-DQ6 flash failure by
mark
Anyone have a resolve as how update the bios part. I get flash failure when
it starts to verify flash on the first block with this board GA-P35-DQ6.
I have tried the floppy method , the windows method.
Is there a way of forcing the write to the eeprom
Any ideas be appreciated
Regards Mark C
|
|
4 |
356 |
|
|
How find IO/Shield for K8VT800 rev 2.0 by
Gilles Vollant
Hello,
I purchased a refurbished motherboard.
It run perfectly, except there is no IO/Shield
do you know a method to get one?
Gigabyte K8VT800 rev 2.0
http://gvollant.free.fr/plaque_giga_754.gif
|
|
1 |
428 |
|
|
GA-MA790X-DS4 Question by
Murray McNeill[_2_]
Trying to get the GA-MA790X-DS4 board set up, and am having an issue with my
hard drives and the SB600 raid controller. I have two older Western
Digital drives in a RAID 0 configuration, but I cannot use the F4 BIOS with
them. I did get a stripe configured and working with the F3 BIOS, which...
|
|
0 |
453 |
|
|
|
|
26 |
1,460 |
|
|
GA-P35-DS3 - manual FSB Clock problem by
Slash
Hi !
I have a GA-P35-DS3 motherboard, C2D E4600 2,4GHz, 2x2GB OCZ DUAL,
Palit Geforce 8600GT.
In BIOS - Inteligent Tweaker i have the following options:
CPU Host Clock Control: Disable
CPU Host Frequency: 200 (read only)
CPU Clock Ratio: 12x
OK - i want to increse FSB so CPU Host Clock Control...
|
|
1 |
386 |