Hi All, I have a P4S800D-E with 1GB of DDR 400 RAM. Specifically I have 2x512MB of Kingston model # KVR400X64C3A/512. This all works great, but I want to upgrade to 2GB usnig the same type of memory. Only problem is that the QVL shows that only 1 module in 1 DIMM is "supported". See the link...

CPU: P4 2,8Ghz at FSB152 means 4:5 divided ram 190x2, almost DDR400... I just put another 1Gb into slot 2 and can´t get Dual channel enabled. In slot 1&3 I´ve 2x 512Mb. These two were runnung Dual Channel before. All 3 moduls are...

I recently purchased two 1Gb 184-pin PC2100 unbuffered DIMMs from Crucial memory (Part No. CT12864Z265.16TD) to upgrade my Asus A7A266-E motherboard from 512Mb RAM to the maximum 2Gb Ram (as stated on Pg 22 of MB manual). The manual also mentions it supports 2.5V 1Gb 184-pin PC2100 unbuffered...

HI! I have a fairly old notebook: Asus L3800C. The manual says the maximum amount of possible RAM is 1GB (2x512MB). But I'd like to know whether it's possible to put 2GB in there because I've read that it's sometimes possible to put more RAM in a notebook than the manufacturer specified back...

Hi all, First I want to thank you in advance for any suggestions. I am the proud owner of a very nice machine but I can't keep thinking about upgrading, therefore I would like to see what other people think. I have: P4P800 DLX (asus)

Memory that works great in the DIMM B slot, won't work in either DIMM A slot. At first I thought it could be how the board is installed, but even with the board out of the case I get the same problem. I ordered and received a new board from Newegg and it is having the same problem. (Which means...

I have Asus S478 Intel 845PE ATX A L R board with P4 2.66 512kb S478 processor, its a new system with new hard drive 60gg maxtor, I am trying to get my other hard drive a 120 gig maxtor, both ata 133 not very old as a slave, on the slaved hard drive is data relevant to my old system so I...

I finally got one of my lans to recognize my modem but now I'm trying to setup a network and the 2nd lan built into the mb isn't being recognized. Tried unstalling and reinstalling but it only wants to recognize the one lan. Any suggestions? Thanks

On my ASUS P4P800-E Deluxe, I have: - the board's built-in USB controllers and rear panel connectors (USB ports 1,2,3, and 4) - the board's USB_56 connected to the rear USB//Game/MIDI bracket - the board's USB_78 connected to my case's font panel's VCC1, USB+, USB-,ground and VCC2, USB+, USB-,...

No responses from 1st try so here is another go at it. Hello, All! I have 2 disks, 3 partitions each, one with XP the other with W2k (i.e. dual boot). I've got the following set for drive names: Disk 1 Disk 2 C (w2k) D (xp) E (prog) G

Simple question for you guys: Can older 2X/ 4X video card, which runs on either 3.3 or 1.5 V, be used on the P4C800 Deluxe, given that the manual is emphatic about not using a 3.3V card? Thanks a lot in advance

I know that at 200MHz two DDR400 modules should not work. Will they work correctly if set to work at 166 MHz ? TIA

I am currently installing the said m/board into my box, and have so far only noticed 1 case fan connector. I have plugged the rear fan into that one, next to the agp socket. Are there any more that I may have missed, and if not, what can I do about the other 2 fans? Thanks BobH Leeds UK

A7N8X Deluxe is about one and one half years old. Today it appears as if the 3Comm network connection does not funtion. Luckily, for some reason I never knew, there is the NVIDIa ethernet available. It works. Any ideas why this might happen?? Do you have any troubleshooting tips? I just don't like...

Ok my mainboard has 3 DIMM slots, in the specs it says it has 6 banks. Inconceivable right? it gets better. Using 3 DIMM slots it can be upgraded to 3 gig. Now, most if not all mainboards have a feature call dual channel, which allow you to install Moduals in pairs for faster processing. I'll...

I have a p4b533-e motherboard with a 2.2 ghz processor. According to asus I can upgrade to a 3.06 ghz processor (if I can find one). Given I can't upgrade the memory speed (currently 166 x 2 ? ) is it worthwhile to upgrade, or should I save my money for a whole new motherboard/cpu/fast memory...

Is it possible to connect three SATA hard drives to the P4C-800E Deluxe if none of them will be RAID? -- **Remove Xs to reply by e-mail**

I have a P4P800-e deluxe, and I would like to add a 500-750 gig hard drive. I have two Seagate SATA drives in a mirror array on the Intel controller, and an IDE hard drive and DVD drive on the IDE controller. I do not have anything on the Promise controller. Can I add a single SATA drive to the...

Hi all, My computer beep 3 short beeps then 1 long beep during POST, then again for sevral times at "Verifying DMI Pool Data..." along with screen blinking. It then says "complete POST test", and boot into win2K as normal. According to the manual, it might be the video card or video card memory...

Hello, I will be make a computer with 6 screens, so I have a motherboard with 3 pci-express slots and ubuntu linux 8.04 install on it. Motherboard type : Asus P5N-T deluxe with a intel E6550 cpu and 3 NVidia 8400 gs cards. Problem : I start always just 2 cards and not the 3rd gpu. lspci said :