About to replace my A7N8X for a new AN7. Currently using two Raptors in SATA RAID, any knowen issues with tranfering the drives? I presume it should all be OK as they have the same Promise SATA controllers on both boards, correct? Hoping it shall be as easy as it has been in the past (uninstall...

I have this running fine at 166*13.5= 2250 (2800+) and chip temp 49C whilst doing some major number crunching.. However, I have made 200*11.5= 2300 which worked fine until I tried to push it to 200*12 and now I can't seem to work out how it kicked in the first time as I never made this again! My...

I have this running fine at 166*13.5= 2250 (2800+) and chip temp 49C whilst doing some major number crunching.. However, I have made 200*11.5= 2300 which worked fine until I tried to push it to 200*12 and now I can't seem to work out how it kicked in the first time as I never made this again! My...

What is the maximum amount of RAM that an nForce-based A7N8X Deluxe board can address? I have heard conflicting reports.

Hi Should this heatsink actually touch one of the mobo board capacitors? Does it matter? It seems awfully close :( D

Hi, Does anyone have this or know where to get it?? Its so late, and its not on demorolous' website..... Anyone heard of when it will come out?? Thx Rob

So I get myself a 3200+ and then buy two separate sticks (same company, style, type, etc.) of PC3200 RAM at 512MB each. I put them in slots 1 & 3 so I can run in "dual channel." As things happen this does not work...the OS will not come up after the BIOS boot screens and memory test (memory tests...

Hi all, I'm having problems with my system - here are the specs: Athlon XP 3200+ @2.19GHz Asus A7N8X Deluxe PCB 2.0 Bios 1005 Corsair XMS TwinX 1024MB PC3200C2 Creatice SB Audigy 2 Platinum eX HIS Excalibur Radeon 9800 Pro Hauppage WinTV PCI Card

hi all, as the title sugests, i got an a7n8x deluxe revision 2.0 board, and i`m looking at doing the cpu volt mod 'tweak'. i found this site, http://www.maximumoc.com/guides/a7n8x_modding_2.html which tells me what todo, but has anyone any final words (except for dont do it), tips, variants, or...

hey all i got the board above recently and done some overclocking. running my 1800+tbredb at 2.31ghz ) problem is, every cold start (eg, overnight, 2-3hours etc) my pc will refuse to boot. if i turn off pc, then back on, asus will C.P.R. boot into bios, i then reset cpu...

What FSB have people been able to reach on this board? Currently I have my XP2500+ (unlocked) at 210x10.5 (2205mhz) with the mem (Geil PC3200) at 100% (210). I took them mem down to 85% (187mhz) and pushed the FSB to 220 and multiplier to 9.5 (2090mhz) and it wouldn't post. It would seem I reached...

Does anyone which version of Bios Savior is used with a ver. 2.0 board? = There are two models listed, RD1-PMC4 or LPC4, for the A7N8X Deluxe.

I've narrowed my choice of motherboard to these two. They are roughly the same price right now and seem to have many similar features. I'm planning on using a 2500+ Barton with a gig of Corsair 3200 memory (PC-3200C2PT), and Sapphire 9800 non-pro, and my hope is to moderately overclock. Are...

just curious the maximum amount of ide devices on this motherboard...right now i have 4 tia

"Raj" wrote in message ... I know these may be off topic, just wondering if anyone know how to use my a7n8x dlx as a router, the A7N8X dlx will be running xp pro sp1, and the second computer my older ( Pentium 3) will be running...

I have modded my Duron to mobile, but I can´t change the multiplier. Do I need a "real" mobile for changing multipliers in bios? I could run the Duron with 15x (stock 12x) on the K7S5A, so the mod works fine.

I have this board and a Barton XP 2500+ The board shipped with the bios 1003. I was able to run the computer at 200mhz fsb x 11 multiplier for a stable XP 3200+. It was able to handle prime95 and 3dmark2001se overnight with no problem. I updated my bios to 1005 and I can now barely keep...

I'm running a 1700+ on an A7N8X 2.0 at 11.5 x 200MHz (2300MHz). I'm currently limited by my ram. I'm wondering if it's worthwhile to upgrade my ram (I'm also wondering what type will work the best) or if the board or CPU will limit me to what im at already. If anyone could post their max...

OK - got the beta 1009 bios from asus - my board is a a7n8x rev 1.06 - running an XP 3000+ (this does list as bios 1008 at post, tho) This bios seemed to unlock my multiplier and I am getting 14x, but I can only get the FSB to 175 or so - so it gets me to 2455 MHz Overall, I think I am better...

Hi all, I'm having problems with my A7N8X Deluxe board. Here are my specs: A7N8X Deluxe Bios 1007 PCB 2.0 Corsair TwinX PC3700 1GB AMD Athlon XP 3200+ All other Hware was used in my old system and works fine.