This has worked for me many times and on several boards. Peel back the label to expose the bearing. Add one drop of oil, place the label back making sure not to get the label oily or it won't stick. On Thu, 14 Aug 2003 12:55:46 GMT, Brian Brunner wrote: On Sat, 2 Aug...

Does anybody know how much power the NF7-S v2.0 consumes?

I am having a problem with a KG7-RAID motherboard. I have 2 256MB PC2100 DIMMs (in slots DIMM4,5 and DIMM6,7) installed and would like to add another 512MB PC2100 DIMM. The system runs well with just the 2 256MB DIMMs. When I add the 512MB (in the slot for DIMM2,3) the POST tests the memory as...

I have a th-7 raid board with a 1.8 g processor and am trying to use 2 128 mb samsung rimm memory sticks with the enclosed c-rimm. I have installed as per the manual with the memory in slots A1,B1 and the crimm in slots A2,B2 and reverse with no success. I receive a post code response of flashing...

Hi, I'm thinking of buying two SATA hard disks and using RAID 0. Is this going to give me a substantial performance increase? i have read somewhere that i'm still limited by the ATA100. Thanks for your input

Question - what kind of demand do you think there would be for personalized case mods where you could have your name/nickname cut in the side of your computer case? What do you think people would pay for this? I ask because I have access to a laser cutting table at work and I am good at CAD. I...

Hi I have an old abit motherborad ABIT PH5 but have a problem with it: the old bios those not want to "see" my cdrom, and there is no option to boot from cdrom. Its not a fault of a cdrom, jumpers(master/.../...), cabels, or anything of this matter. I tried to update the bios with awdflash 7,36...

Hi I have a problem after I upgraded from duron 600 mhz - xp 1700+ and 256 mb ram - 2x256 mb 1xPC2100 and 1xPC2700.. Now memtest86 counts LOTS of errors in test 5 - but the blocks are OK in my other machine. How can I fix it ? The pc doesn't run faster after upgrade, and there is problems with...

This is the second time I have lost a motherboard when flashing a BH6 motherboard (the only 2 times I have had failures). Anyone have any idea's how to recover from this. I know this is an old motherboard, but it honestly angers me that both time it was a BH6. Just looking for some suggestions.

I have a HP- cd rw device that I know is OK from hardware standpoint ( tested on another PC), but on my ABIT KG7 RAID system, hangs up at the end of a cd burn. ( the green light on cd burner flashes, and the burning software becomes unresponsive.) This occurs independently from which program is...

Hello, When I run certain software on my computer running an AT7-Raid motherboard I get lots of Hardware failure stop errors in windows XP when I run one game specifically "Divine Divinity" and when I run enter the matrix windows XP crashes on a sound card driver. I am running an Athlon XP 2000+...

Hi there, does anyone know if it is possible to activate power loss recovery on a KT7A mainboard? I can't find the appropriate setting in my BIOS. Should I upgrade the BIOS or isn't it supported at all? Maybe there is a hardware method? I tried shortening the Power-On button, but it didn't help....

Hello, I have XP installed running the KT7A-Raid motherboard with 384 MB PC-100 memory and a 1600+ XP Athlon CPU without windows XP installed I had all sorts of errors and of course windows XP would not install on this computer. I do of course have XP installed now but I had to put the hard drive...

Hey Gents, I've got two SD7's. One had been returned to Abit quite a while ago and not tried until just now. The other worked fine, but I pulled it out to try an Epox at home for a few months. Now I have to use the Epox at work, so I'm trying to get an SD7 working at home. Basically, I get nothing....

Ok here's the deal I am currently running an Abit KT7-raid mobo at raid-0 The board is suffering from the electrolytic capacitor failure. I was able to find a new KT7a-raid board on e-bay and purchased it Now the question is,can I just transfer everything over to the new board including the...

Wondering if you resolved this. I am having the same problem with my ABIT BE6 board. XP worked fine for months and suddenly started hanging and now it wont either install or be stable (depending on which CPU i use). Win 98 is stable tho. Tried replacing every component including RA, video card,...

Hello, Are the KT7A-Raid motherboards notorious for their memory slots dying? I am having memory issues with mine and I cannot seem to find a fix... I'm running 3 128 sticks of memory in it for a total of 384 MB SDRAM and the test program reports lots of errors but on other motherboards the...

Can someone help dummy here? I've finallly gotten around to needing my SATA controller. When I built the computer the driver was not available and was not included on my CD. When I download the driver from the abit website it's a zip file. When I unzip it there is nothing that I can execute. ...

Hi, i just bought two 512 MB DDR PC-400 Infineon Ram and am running them synchron (333 FSB, running asynchron on 400 gives not better results) to my 2600+ Athlon. I am not noticing any real improvements in performance, here are my benchmarks results (befor I had 1 512 MB Ram PC-333) Before Dual...

After I install the brand new Corsair 256mb PC3200 400mhz (Value Select vs256mb400c3) on the NF7-M motherboard, the pc won't post and has one long beep that indicates the memory problem. But I used to use the Corsair 512mb PC 2700 333mhz(Value Select VS512MB333) and it ran fine with no problem....