I have an Athlon XP 3200+. It's running idle at aroun 66C. Don't ask me why, I don't know. I have 3 fans in the system. One on the CPU (a stock AMD Certified fan), one on the PS and one on the back to force air out. I do have dual 120GB Serial ATA drives that might contribute. At any rate, if...

I got an AMD 64 3000+ retail how good can I overclock it? just curiosu I may try it or wait till I get my 6600 agp card and then try it lol oh yeah socket 754

Hi Just bought one of these, and would like to be able to monitor the temperature of the chip without going back into BIOS. Haven't been able to find such a program yet. Recommendations? TIA

I got a XP1800 and a want to know is it locked or unlocked Serialnummer 0144 is Year 2001 Week 44 agnga Stepping ax1800dmt3c agnga 0144mpm 41f19280036

Present CPU is a K6-2/475 ACK stepping; but it is 2.0V Vcore I'm well-versed on the K6+ series CPUs ; I'm gonna do it anyway as I've still got a couple of the III+ chips left over from building some kick-ass K6 desktops a few years ago. The worst case is that I'll have to put the old cpu back...

Hi everybody I am new in this NG, coming from France... I hope my english will be understandable :oÞ I would like to know whether anyone would have experience in overclocking this CPU I intend to buy ? What would be the best mobo for this proc ? Thanks in advance.

Hi folks, well, I'm just getting started with overclocking and need some help putting all the factors together in order to achieve a stable O\C system. I got an AMD Barton 3000 (333) on a Abit KV7 board with two sticks of Kingston Hyper X 3200 (400). I'm aware of such things as: FSB, multiplier,...

"Franklin" wrote in message ... I came across this. Is the guy right? QUOTE Volumes have been written on this subject, but suffice to say that Intel chipsets are the most stable. I do not know if this is because Intel does a...

There seems to be someone asking for a motherboard recommendation everyday, but its my turn today! I have a Thoroughbred (unlocked) 2400+ (15 x 133), DDR333 RAM and a Zalman Flower cooler, so overclocking should be possible. My Soltek motherboard can't go over about 160Mhz as the PCI / AGP...

A7N8XE-Deluxe, Rev 2 Barton XP2600-M at 1.65V and 1666MHz (for now ;-) Speeze Whisper Rock II, .55C/W Kingmax MPXC22D-38LT3R 2x512MB PC-3200 CAS 2.5 MBM 5.3.7.0 WinXP-SP1 Both the Asus Hardware Monitor and MBM indicate a CPU socket temp of 38 deg idle and 41 deg at 100%, with case temp of 18 deg...

http://www.theregister.co.uk/2004/10/19/amd_price_cuts/ What's this about discontinuing some XP-M models tho? rms

OK, "does not overclock" is not entirely correct. I'm getting a FSB of 172 MHz, anything higher is unstable. I'm using 3200 Kingston ram and haven't fiddeled around with the voltage yet. Any idea? TIA JensSchumi

hey all, what's the buzz now at the end of 32bit and should i wait before going 64? many thanks in advance... ztex, joe-z, fuison2, gunner, etc, etc... linkage please...

Hi, I have converted my superlocked Barton 2800+ into a "mobile" processor using the L5 trick so that I can change the multiplier by software. (I'm not looking for extreme overclocking, I just want to get my fsb up to 200 MHz at x10.5 or x11). However I have an Asus A7N8X Dlx Rev2 and I have not...

have a AK35GTR mother board with a AMD 2200+ proccesor but it only post at 1800+ what do i set the bios at to post at 2200+? Thanks JB

I am giving this http://tinyurl.com/6o2xz some consideration on this combo to replace my existing Asus and Amd 2100+ with ATI 9800 pro. Apparently this MB supports DDR 266 which is good news as I can using my existing 2-512MB sticks. Is this an good overclockable combination? Any other things I...

on the same motherboard which would perform better? I assume that the Duron would be better. also on one motherboard I can only run the Duron underclocked at 1200 which would be faster then?

I asked a few days ago what the fastest cpu for a Abit KR7a with raid. I was directed to a google sight that told me a 2600xp is the fastest i can go but only the one with 266fsb. So i did a little shopping around and saw a 2600xp with 256k cache and one with 384k cache. Now I never heard of...

Anyone tried to overclock Sempron 2200+ with 220fsb? I know for sure that my Motherboard Albatron KX18D Pro II works wit 220fsb but did anyone acchived more? If so plz post msg and write down voltages! Thanx for your assistance.

Hello, I am new to overclocking systems with the FSB built into the CPU, so please bear with me. I've searched with google but could not find a clear answer to this. I am using the following: MSI K8N Neo2 Platinum (Nforce 3) Athlon 64 3000+ 939, 90 nm