|
|
amd processor info by
LOOPY LEE
does any one know where I can get a chart with the amd xp data? im after
fsb, default multiplier that sort of thing. Hope someone can help
lee
|
|
0 |
217 |
|
|
Which Duron has low heat output ? by
JonH
Which Duron has low heat output ?
1200
1400
1600
1800
?
I'm looking at building a PC with a small slim case so the CPU Heatsink &
Fan can be no larger than 55mm.
( 1 2)
|
January 8th 04 07:31 PM
by Immuno
|
11 |
876 |
|
|
Tweaking locked Athlon XP 2500+ by
Christian Stade-Schuldt
Hi Folks,
is it possible to tweak Athlon XP 2500+ CPU produced after 39
calendar week.
The multiplier is of course fixed, but with the right mainboard and the
right ramm it should be possible to run the system with FSB 200 Mhz!
This should be equal to Athlon 3200+.
Thanks
Christian
( 1 2)
|
January 8th 04 12:10 PM
by fau
|
13 |
614 |
|
|
14x multiplier for T'bird? by
Dylan
G'day,
As far as I can see, the 1400Mhz 'B' Athlon Thunderbird must have had a 14x
multiplier i.e. 14 x 100 = 1400. Assuming this chip is identical to the 'C'
(133 MHz FSB) T'birds, except of course for the bridge settings that call
for a 14 x multiplier, a 'C' T'bird should be able to do 14 x FSB....
|
January 8th 04 11:10 AM
by Dylan
|
4 |
591 |
|
|
A7N8X-X, retail Barton 2500/333 @ 2200/200 by
Tundra Wookie
I just got a new board, proc and mem today, threw it together and me being
the space cadet that I am, set the FSB to 200 in the BIOS. On boot I raised
an eyebrow when I saw it reporting a 3200+ and it proceeded to boot
peacefully. I've been running it and abusing it for the past 10 hours...
|
|
5 |
389 |
|
|
Athlon 64 3400+ released by
Wes Newell
New pricing shows the 3200+ should drop below $300 soon.
http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_609,00.html?redir=CPT301
--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
http://mysite.verizon.net/res0exft/cpu.html
|
January 8th 04 02:39 AM
by Neil
|
1 |
409 |
|
|
Barton XP 2500+ Week 35 Appears to be Locked--on a 266 MHz mobo by
Peter Harrington
I just picked up a Barton XP 2500+ W 35 from mediantech. I am running it
on an Epox 8K5A Mobo, which only supports a 266 FSB. On friday I will swap
it into an Epox nForce2 board (no model number given) with 400 MHz DDR.
I can adjust the FSB on the 8K5A to 166 MHz, and I can alter the...
|
|
0 |
805 |
|
|
locked barton 2800+ chips by
Moods
Italy Anonymous Remailer, you say...
Bought a 2800+ that is locked. Using an Asus A7N8X deluxe board with crucial PC3200 memory.
If I change the multiplier in the bios to ANYTNING (higher) than 12.5 I cannot get it to
POST and I have to crack the case and reset the CMOS clearing jumpers to...
|
|
3 |
427 |
|
|
OverClocking with Asus A7N8X-DX and Athlon XP 2500+ Barton by
Swifty_SySoP
I have a question about overclocking these two components. Currently,
I have the Aggressive settings for my RAM. I have a FSB of about 166
set now and a multiplier of 12.5 , which I believe is not locked. The
CPU is recognized as a 2800+ under Windows XP and my BIOS. I have
heard I can...
|
|
5 |
515 |
|
|
|
|
0 |
492 |
|
|
Read somwhere that the 2600+ runs on the +5v rail? by
Moods
As I am on a tight budget, I placed a second old psu in my case, this
psu 'only' poweres 2 HD, 1 CDRW, 7 fans. The other cpu powers 'only' the
motherboard. Now I was wondering if my voltages are oke, I noticed the +
5V is still pretty low. These are my voltages under prime's torture test
in...
|
January 7th 04 06:38 PM
by Moods
|
0 |
549 |
|
|
Artic Silver 5 vs Artic Ceramique by
Nil Einne
Hey all,
Anyone have any links to reviews comparing Artic Ceramique (Arctic
Ceramique) with Artic Silver 5 (Arctic Silver 5)? I'm unable to find
any, only AS5 vs AS3.
Thanks all
( 1 2 3 ... Last Page)
|
January 7th 04 05:39 AM
by Matt
|
50 |
2,240 |
|
|
MSI MS-6380 Vcore out the wazoo! Any ideas? by
Cory Dunkle
I have an MSI MS-6380 (K7T266 Pro IIRC) with a 1.533 GHz Palomino. This is
actually the CPU and motherboard combo I 'won' at the AMD Extreme
Performance Project in Philly.
I checked my core voltage today as my CPU seems to be running a bit hot at
54C under full load. The core voltage reads ~2.1...
|
|
0 |
551 |
|
|
FX-51 on dual motherboard by
Scotter
Hi -
I have ordered one AMD 64 FX-51 cpu and a MSI K8T800 Master2-FAR Dual/Single
Socket 940 motherboard to put it on. This particular motherboard supports
dual processors. What I'd like to know (that I have not been able to find
out thru MSI) is if it supports dual FX-51's or if I have to run...
|
|
3 |
581 |
|
|
How high is too high for temps? by
Broedie
Currently running a 2100+XP as a 2700+XP. Running @166Mhz buss at 13
multiplier. Vcore is at 1.7V. I have a moderately good CPU Fan
(Evercool EC-CUD-715) and MBM shows the following:
Case Temp-30
Socket Temp-34
Diode Temp-44
It is the diode temp that I am worried about. Under full load,...
|
January 7th 04 02:00 AM
by Lopaka
|
3 |
474 |
|
|
|
January 7th 04 01:41 AM
by Mac
|
0 |
209 |
|
|
Processor Upgrade by
CW
I am considering upgrading my motherboard and processor - from Athlon
M4(Thunderbird) 1.1 to an AMD XP 2800 - but will I need to get a new case
as well? I currently have a 300watt case, I would be grateful if someone
could advise me.
Colin Webb
|
|
1 |
569 |
|
|
Strange question by
Moods
Is there a way to speed up your fans? like a volt mod or something,..
Just bought a revoltec 80x80 led fan, it only runs at 2000 RPM. Don't
care about the led thing but I saw 0,25Amp so presumed this thing would
blow me away. Fact is my old and sick grandmother blows harder,..
Any help...
|
January 6th 04 11:56 PM
by Moods
|
3 |
354 |
|
|
|
|
5 |
511 |
|
|
250W psu... by
Streiff
Hello,
I am getting a new motherboard, 256 Mb memory and an Athlon XP2600+. I
already have a Geforce2, one HD and 2 cd-roms.
The question is, will a 250W PSU be enough to power the hardware?
Thanks.
( 1 2)
|
|
13 |
590 |