Good idea. I have another A7N8X coming back from newegg on RMA I will probably swap it into my system with the problem and check for unused standoffs. "Ken" wrote in message ... On Thu, 19 Jun 2003 09:26:59 -0500, "Klaus"...

"Ilan G" wrote in message ... I can only get my USB 1.1 ports to function everything works when connected to them, BUT nothing works when connected to the USB2.0 ports. I have Windows XP professional with all...

shAf wrote: After building a computer with an early revision P2B, I want to build another computer with a P4PE + P4(2.4Ghz), and would like to find a tried & true mobo revision. Which revision should I settle for? Which is the most recent? Any other issues? -- tia & cheerios ......

Thanks for the suggestions guys, though I think I may have finally cracked it, I had set the reserve bandwidth for QOS to 0% bumping it back up to 10% seems to have solved the problem. I guess not all tweaks work for every system ! Thanks again. Rigga

hello, I've bought recently a7v8x-x card and wanted to mount it with an AMD XP fsb 333. But I don't know which is the maxi mult I can use ( 11, 12 or 12.5), it's not specified in the manual. also I wanted to know which process is suitable for this card to have best performance ( XP 2500 or 2600)....

Clive Lumb wrote: Will your monitor go up to 85 Hz ? If so, does it still flicker ? What happens at 75Hz at a lower resolution. Otherwise if you drop your resolution or colour depth you might be able to get to a higher refresh rate. That being said 75Hz should NOT flicker. I can tell if...

Aw, I don't know about that. I have three systems with P3 850mhz IWill sloket, 512mb ECC memory each- w/ Win 98se. The motherboard is Asus P2bf, in all three. Two of the thee are purchases from EBay. Get a P3bf off of EBay for a few bucks. You'd move all your peripherals and the hard drive...

I have been using the XMS PC3500 for over a year now without problems. Well, seems like a year on the first release of the Asus A7N8x Deluxe. I even OC'd to 400 FSB on the 333 board. Great RAM! "Ben Pope" wrote in message ... ...

John wrote in message ... John, Off topic but is your Sonata case much quieter than other cases? Looks like a wonderful case! JG John Smith wrote:

I am running a p4 3.06 on an asus p4pe board. I have a drive on the raid controller and the serial port 1 running raid 0. On the primary controller I have two drives. A DVD is on the secondary controller. I am trying to find out what drivers should be installed in Win 2K for the IDE...

Does anybody have an ASUS P4S533 with 2x512(1GB) strips of PC2700(or greater) ram running successfully? I know that the motherboard can only support 4 banks of pc2700 ddr. I can't seem to find any 512mb modules that use only 2 banks. If you are, could you tell me the type of RAM, brand, model,...

I just installed WinXP on my new A7N8X board... the USB ports are working but how can I tell if the 2.0 drivers are installed or if XP installed the 1.1 drivers only?

Ben Pope wrote: S.Heenan wrote: Mark Walton wrote: but I can't get in to bios yet to change anything! Enable "Halt on No Errors" and disable Post Reporter. Chances are good this error is incorect and your RAM is fine. The A7N8X series is buggy in this regard. Might wanna...

Hi guys, I have an Asus CUSL2 motherboard and a 80GB HDD, and am thinking of getting a 120GB HDD as a 2nd drive in the system, first of all does anyone know if the CUSL2 will take 200GB of storage altogether (or 120GB in 1 channel)? And what make do I go for? I've heard that IBM's 180GXP is a...

I was looking at the specs for the A7N266-VM/AA (actually it was for the A7N266-VM which said PCI 1.1) on Asus' website. I couldn't find a spec sheet for the A7N266-VM/AA. But anyways, can anyone tell me if the A7N266-VM/AA is PCI 1.1 or 2.2 compliant? Most of the other Asus socket A boards I...

I flashed the bios on my A7V motherboard from version 1007 to 1011 today. After the flash, I have been unable to boot all the way into Windows XP. The system now hangs while either doing the memory test or while scanning for the IDE devices installed in the system. When I hit the DEL key to go...

I put an old 486 fan on top of mine, i have found the southbridge needs a small passive heatsink on it (memory coolers are ideal) as for changing it completely i dont see why not, the cooler you keep it the stabler the system will be ;-) Cooling memory also helps alot. Duke Satan "Shap"...

And as if I have not hawked the Raptor enough, I forgot to mention in comes with a "legacy" 4-pin Molex power connector built in so no power adapter is need. Koop "John Smith" wrote in message ... Thanks,

Is there a reason you want to forego the use of IDE altogether? I would think that having your CD-RW on the IDE controller separate from the SATA controller would provide performance superior to that of adding an IDE device as a slave on an SATA controller, is that an incorrect...

I have a 9800 Pro 128 meg card and it works perfect and wonder if the 256 meg version will also work with my A7N8X deluxe? Also, is the "Sapphire ATI" brand an OK product? Thanks. -- ..